• 제목/요약/키워드: MgFe$_2$

검색결과 2,408건 처리시간 0.037초

찹쌀 품종별 강정 제조 특성 (Quality Characteristics of Gangjung Made of Different Varieties of Waxy Rice)

  • 김경미;이지현;김행란
    • 한국식품과학회지
    • /
    • 제42권2호
    • /
    • pp.175-182
    • /
    • 2010
  • 강정 제조용 최적 찹쌀 품종을 선정을 위해서 찹쌀 10품종의 원료찹쌀과 최적조건 수침찹쌀의 이화학적 특성과 강정의 팽화율, 유지흡수율, 색도, 조직감 등을 분석하였다. 이러한 결과를 주성분분석하여 강정과 이화학적 특성과의 관계를 해석하였다. 품종별 원료찹쌀의 수분함량은 10.8-12.7% 수준이었으며 단백질 함량은 백운찰벼가 9.2%로 가장 높았고 최고점도, breakdown, setback은 백진주벼와 백진주벼1호가 가장 높았다. 최적조건 수침찹쌀($31.5^{\circ}C$, 9일)의 수분함량은 한강찰벼가 가장 높았고 백운찰벼가 가장 낮았으며 단백질 함량은 시료간의 유의적 차이가 없었다. 최고점도와 breakdown은 밀양225호가 가장 높았고 백진주벼가 가장 낮았으며 setback은 백진주벼1호가 가장 높았으며 동진 찰벼, 화선찰벼, 신선찰벼가 가장 낮았다. 원료찹쌀을 수침 시 수분은 증가하였고 단백질, 회분, 무기질은 대부분 감소하였으며 최고점도와 breakdown은 백진주벼와 백진주벼1호를 제외하고는 증가한 반면에 setback은 모든 품종이 감소하였다. 찹쌀 품종별 강정 제조 시 팽화율이 크고 부드럽고 아삭한 강정 제조가 가능한 최적 품종은 신선찰벼, 동진찰벼, 한강찰벼, 백운찰벼, 화선찰벼, 밀양210호, 밀양225호, 상남밭벼 순이었다. 반면 팽화가 잘 일어나지 않고 단단한 조직감을 지닌 백진주벼와 백진주벼1호는 강정 제조용으로 부적합한 품종이었다.

Analysis of activated colloidal crud in advanced and modular reactor under pump coastdown with kinetic corrosion

  • Khurram Mehboob;Yahya A. Al-Zahrani
    • Nuclear Engineering and Technology
    • /
    • 제54권12호
    • /
    • pp.4571-4584
    • /
    • 2022
  • The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s-1) has been found 9.63×10-3 µCi cm-3, 3.53×10-3 µC cm-3, 2.39×10-2 µC cm-3, 8.10×10-3 µC cm-3, 6.77× 10-3 µC cm-3, 4.95×10-4 µC cm-3, 1.19×10-3 µC cm-3, and 7.87×10-4 µC cm-3 for 24Na, 54Mn, 56Mn, 59Fe, 58Co, 60Co, 99Mo, and 51Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

중추신경계통내 분포하는 Zinc의 조직화학적 동정 (Autometallography for Zinc Detection in the Central Nervous System)

  • 조승묵;;김성준;박승국;강태천;원무호
    • Applied Microscopy
    • /
    • 제30권4호
    • /
    • pp.347-355
    • /
    • 2000
  • Zinc는 인체 내에 철$(Fe^{2+})$다음으로 많은 trace element로서 200여개 효소의 기능에 필수적일 뿐만 아니라 신경계통내에서는 신경조절물질로 작용한다. 뿐만 아니라 허혈, 간질 및 퇴행성 뇌질환의 주요 병리기전에도 관여되어 있다. 그러나 대부분의 Zinc는 단백질에 결합되어 (bound form)신경세포의 세포질 및 핵질내에 존재하고, 10% 이하의 Zinc는 이온상태(free form, $Zn^{2+}$)로 신경종말 (Zinc enriched terminal)에 있는데 , 후자만이 조직화학법으로 가시화된다. 최근까지 새로 개발된 조직화학법으로 Zinc enriched(ZEN)neurons의 분포에 관한 연구가 각광받고 있으나, 국내에서는 이에 대한 연구가 전무한 실정이다. 이에 본 연구자는 고전적인 조직화학법의 기본 원리를 소개하고, 렛드 중추신경계통내 Zinc의 분포를 광학 및 전자현미경으로 관찰하고자 하였다. 본 연구에서 사용된 실험동물은 Wistar 계통의 랫드(10주령)와 BALB/c 마우스이며, 마취제로는 Pentobarbital(50mg/kg)을 이용하였다. 생체 뇌조직내 이온상태의 $Zinc(Zn^{2+})$를 침전시키기 위하여 selenium(10mg/kg, i.p.)을 처리하였고, 1시간 후 3% Glutaraldehyde액으로 관류고정하여 동물을 희생시켰다. 뇌와 척수를 꺼내어 sucrose에 가라앉을때 까지 담가두었다가 Dry Ice를 이용하여 얼리고, Freezing microtome위에서 $30{\mu}m$두께의 절편을 작성하였다. 조직절편내 $Zn^{2+}$을 동정하기 위한 조직화학법으로는 autometallography (AMG) (Danscher, 1985)를 이용하였다. 광학현미경하에서 밝혀진 Zinc의 분포는 해마복합체를 비롯한 종뇌의 여러부위에 고농도로 분포하였고, 척수에는 중간정도, 그리고 소뇌 및 뇌간에는 매우 낮은 농도로 분포하였다. 전자현미경에서 관찰된 AMG염색과립(silver grains)은 신경종말에 있는 연접소포에 국한되었으며, 이러한 ZEN terminals은 주위 여러 신경세포의 돌기(dendrites)및 세포체 (soma)에 특이한 연접을 이루고 있었다. 즉 후각망울을 포함한 종뇌에서는 주로 비대칭연접 (asymmetrical synapses)이 관찰되었던 반면에, 척수에서는 대칭연접(symmetrical synapses)을 이루고 있었다. 이상의 결과를 종합하면, 신경종말내 연접소포에 Zinc를 함유하고 있는 소위 ZEN terminals은 중추신경계통에 광범위하게 분포하고 있으며 또한 신경부위에 따라 다양한 분포와 미세구조의 차이를 보였다. 이러한 사실은 중추신경계통내에서 Zinc가 영위하는 신경생물학적 기능이 신경부위에 따라 다양할 것임을 시사한다.

  • PDF

미역첨가 식이가 당뇨 유발쥐의 혈청지질과 혈당 및 항산화 효소에 미치는 영향 (Effects of Dietary Seaweed on Blood Glucose, Lipid and Glutathione Enzymes in Streptozotocin-Induced Diabetic Rats)

  • 조영자;방미애
    • 한국식품영양과학회지
    • /
    • 제33권6호
    • /
    • pp.987-994
    • /
    • 2004
  • 미역 첨가식이가 당뇨쥐의 당질과 지질대사 및 항산화효소계에 미치는 영향을 규명하기 위하여 SD계 흰쥐에 식이 무게량의 20% 미역 분말을 급여하여 7주간 실험 사육한 후 혈청의 포도당 및 지질농도와 주요 장기의 항산화효소의 활성도를 관찰하였다. 미역 당뇨군에서 미역의 섭취는 당뇨에 의한 체중감소 현상을 보였다. 당뇨군의 혈당 농도는 미역 섭취에 의한 혈당강하 효과는 2주 째에 나타났으나 7주 째는 보이지 않았다. 혈청지질중 총 콜레스테롤과 LDL-콜레스테롤은 변화가 없었으나 중성지방은 미역 당뇨군에서 감소하는 경향이고 HDL-콜레스테롤은 증가하는 경향으로 나타났다. 일반적으로 당뇨시 증가하는 신장의 G6Pase 활성도는 MD군에서 미역의 섭취에 의해 유의적(p<0.05)으로 감소했다. 대조군에서 증가된 간장의 GST 활성도는 미역 섭취에 의해 유의적(p<0.05)으로 감소했다. 간장의 GPX 활성도의 경우, 미역 섭취에 의해 증가하는 경향이었다. 간장의 GR 활성도는 미역 당뇨쥐에서 미역 섭취에 의해 감소하는 경향이나 신장에서는 상반되는 경향으로 나타났다. 간장의 TB-ARS는 미역 당뇨군에서 증가하는 경향이었다. 따라서 7주간의 미역첨가 섭취로 당뇨쥐의 고혈당이 강하되는 것은 2주에 나타났고 7주에는 관찰하지 못하였으나, 당뇨에 의한 산화적 스트레스로 인해 증가한 간장의 항산화 효소 활성도(GST)가 미역 섭취로 인해 저하됨으로써 미역의 섭취가 당뇨시 항산화적 반응을 제공할 수 있음을 유추할 수 있었다. 또한 중성지방이 감소하고 HDL-콜레스테롤의 증가하는 경향으로 심혈관계와 관련되는 당뇨합병증의 억제 가능성을 제시하였다.n)에서 Fe과 Mn 간의 길항작용으로 현저히 낮아졌다. 본 시험재배 조건별 Fe-함량의 변화는 white clover가 orchardgrass보다 상대적으로 더 큰 차이를 보였다. Mn-함량은 초종 간 큰 차이를 보였고 두 목초 공히 Mn을 함유한 조합시비로 크게 증가하였지만 이들 조합시비 간에는 차이가 경미하였다. 3. Mo-함량은 모든 경우 $T_6$ 6및 $T_7$ 에서 다소 높은 수준 이였다. $T_7$$T_6$ 에 비해서 Mo-함량이 다소 낮아졌다. Mo-과다피해는 B/Mo 비율의 조화 또는 B-시비를 통해서 경감되거나 방지할 수 있는 것으로 보였다. 모든 경우 white clover가 orchardgrass보다 B-함량이 높았고 $T_7$ 에서 B-함량이 크게 증가하였다. 혼파보다 단파재배에서 더 높았다. 처리구보다 더 높았으며 반면에 white clover는 가장 낮았다. 큰 요인을 형성하는 1차적 환경이 가정이라는 점에서 2000 가족과 함께 하는 창의성 경진대회는 창의성 축제의 한마당이었다고 감히 결론짓고자 한다.계시비 수준은 3회 예취구에서 558.9 kg $ha^{-1}\;yr^{-1}$, 4회 예취구에서 531.4 kg $ha^{-1}\;yr^{-1}$, 5회 예취구에서 546.3 kg $ha^{-1}\;yr^{-1}$ 이었으며, 이 때 얻어지는 최대 건물수량은 각각 18.4 ton, 12.7 ton, 10.6 ton $ha^{-1}$

버섯 수확 후 배지의 흰점박이꽃무지 사료화 연구 (Evaluation of Spent Mushroom Substrates as Food for White-spotted Flower Chafer, Protaetia brevitarsis seulensis (Coleoptera: Cetoniidae))

  • 이슬비;김종원;배성문;황연현;이흥수;이병정;홍광표;박정규
    • 한국응용곤충학회지
    • /
    • 제57권2호
    • /
    • pp.97-104
    • /
    • 2018
  • 항암작용과 간 질환을 예방하는 약용곤충으로 널리 알려진 흰점박이꽃무지 유충은 2016년 12월 일반식품으로 등록되었으나 판매가가 높아 소비가 활발하게 이루어지지 않고 있어 생산 단가를 낮추는 기술이 요구되고 있는 실정이다. 흰점박이꽃무지의 생산 비용을 절감하고 생산성을 향상시키기 위해 농업부산물인 새송이버섯 수확 후 배지와 표고버섯 수확 후 배지를 유충의 먹이로 급이하여 생육특성과 미량성분, 중금속함량을 조사하였고 대조구로는 관행으로 사용되고 있는 참나무 발효톱밥을 급이하였다. 새송이버섯 수확 후 배지를 급이한 처리구가 유충사육기간이 16.2일로 가장 짧았고 유충 무게 증가율과 고치 무게는 각각 156.3%와 4.1 g이었다. 새송이버섯 수확 후 배지를 급이한 처리구에서 용화율은 100%였고 우화율은 93.9%로 가장 높았지만 통계적 유의차는 없었다. 또한 총질소함량도 10.28%로 가장 높았고 미량원소 중 철은 145.8 mg/kg으로 다른 먹이와 비교해 높은 결과를 보였다. 성충의 산란선호성은 먹이 간 통계적 유의차가 없었다. 본 연구의 결과를 종합하였을 때 기존에 사용하고 있는 참나무 발효톱밥 대신 새송이버섯 수확 후 배지를 먹이로 사용하면 흰점박이꽃무지 유충 100 kg 당 667,960원의 비용이 감소할 것으로 추정된다.

소백산육괴 서남부의 잔류반상 화강편마암의 암석학적 연구 (Petrology of the Blastoporphyritic Granite Gneiss in the Southwestern Part of the Sobaegsan Massif)

  • 이춘희;이상원;옥수석;송용선
    • 한국지구과학회지
    • /
    • 제22권6호
    • /
    • pp.528-547
    • /
    • 2001
  • 소백산 육괴 서남부에 분포하는 지리산 지역에는 알칼리장석이 거정으로 산출되는 편마암이 광범위하게 분포한다. 본 연구는 기존의 반상변정질 편마암을 그 기원과 조직 특성에 따라 잔류반상 화강편마암(blastoporphyritic granite gneiss)으로 명명하였다. 화강암질 편마암을 관입하고 있고 포획암을 함유하며 잔류반상 화강편마암과 화강암질 편마암 경계에서 알칼리장석 거정의 유 ${\cdot}$ 무를 뚜렷이 확인할 수 있는 등의 야외 증거는 잔류반상 화강편마암이 멜트 기원임을 밝혀준다. 잔류반상 화강편마암에서 거정으로 나타나는 알칼리장석의 형태는 주로 장방형이며, 타원형 내지 원형을 이루기도 한다. 알칼리장석 거정들의 평균 장경은 2.2에서 6.5cm(평균 4.3cm)이지만, 큰 거정(크기로 상위 30%)들은 7.9cm(평균 5.2cm)에 달한다. 잔류반상 화강편마암의 흑운모 조성은 에스토나이트와 시데로필라이트의 중간 성분으로 구성되어 있다. 잔류반상 화강편마암에서 산출되는 석류석은 그 성분이 알만딘으로 중심부는 파이로프 성분이 풍부한데 비하여 주변부로 가면서 파이로프 성분이 급격히 감소하고 알만딘 성분이 풍부해지는 전형적인 후퇴변성의 누대구조를 이루고 있다. 알칼리장석 거정의 분석 결과는 결정의 주변부로부터 중심에 이르기까지 그 조성의 변화가 없었다. 알칼리장석 거정에 석영, 흑운모, 사장석, 세립의 미사장석 등이 포유되어 있다. 잔류반상 화강편마암의 사장석은 안데신의 조성을 나타낸다. 주성분 산화물의 변화 경향에서 잔류반상 화강편마암은 체계적인 변화를 보이며, 분화 경향에 의하면 마그마의 결정분화에 의해 생성되었음을 알 수 있다. 전암 화학조성에 의하면 잔류반상 화강편마암은 화강섬록암 영역에 도시되며 칼크알칼리 계열의 파알류미나질 S-타입화강암이 기원암이다.

  • PDF

멍게(Halocynthia roretzi) 식해 및 조미 멍게의 영양 및 생리활성 특성 (Nutritional and Physiologically Active Characterizations of the Sea Squirt Halocynthia roretzi Sikhae and the Seasoned Sea Squirt)

  • 김풍호;김민지;김지혜;이지선;김기현;김현정;전유진;허민수;김진수
    • 한국수산과학회지
    • /
    • 제47권1호
    • /
    • pp.1-11
    • /
    • 2014
  • This study was carried out to investigate nutritional and physiologically active characterizations of sikhae and the seasoned products from the sea squirt Halocynthia roretzi. The total taste values of sikhae fermented for 4 and 5 days were 10.9 and 15.4, respectively, which was lower than for commercially seasoned sea squirts. The sikhaes contained mostly glutamic and aspartic acids. The total amino acid contents of sikhaes fermented for 4 and 5 days were 5.5 and 6.0 g/100 g, respectively, which were lower than those of commercial seasoned-sea squirts or similar. An amount of 100 g of sikhae and its seasoned products contained P, K, Mg and Fe, and these minerals, which are deemed good for our health, were at 10% above the recommended daily requirements. The functional properties of sikhae fermented for 4 and 5 days were as follows: for ACE inhibiting activity, 69 and 69.5%, respectively; for antioxidative activity, 28.9 and 29.3%, respectively; for xanthine oxidase inhibitory activity, 52.8 and 53.1%, respectively; and for ${\alpha}$-glucosidase inhibitory activity, 2.4 and 1.4%, respectively. Antimicrobial activity of the 5 day fermented sikhae against Vibrio parahaemolyticus and Staphyloccus aureus was detected in 8 mm and in 7 mm against Escherichia coli.

Application of Gamma Ray Densitometry in Powder Metallurgy

  • Schileper, Georg
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2002년도 제3회 최신 분말제품 응용기술 Workshop
    • /
    • pp.25-37
    • /
    • 2002
  • The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

  • PDF

착생에 따른 담쟁이덩굴 흡착근의 부착 특성 (Characteristics of Adhesive Disks in Parthenocissus tricuspidata during Attachment)

  • 이명희;김인선
    • Applied Microscopy
    • /
    • 제41권2호
    • /
    • pp.139-145
    • /
    • 2011
  • 담쟁이덩굴(Parthenocissus tricuspidata)은 줄기에 형성된 흡착근으로 접촉 물체표면에 부착하여 식물체를 여러 방향으로 자라게 한다. 이들 흡착근은 접촉면에 일단 착생하면 잘 떨어지지 않는 부착 특성을 지닌다. 본 연구에서는 적벽돌 벽면에 담쟁이덩굴 부착 시 수반되는 흡착근과 벽면 간의 구조적 변화와 함유하는 성분 간의 연관성에 초점을 두어 주사전자현미경과 에너지 분산 X-선 분광분석법으로 비교 연구하였다. 담쟁이덩굴의 흡착근은 적벽돌 표면에 강력 착생하여 벽면을 피복하며 거의 모든 방향으로 생장한다. 이들이 벽 표면에 접촉하는 경우, 흡착근 배축면 내부조직에서 분비하는 점액성 물질에 의해 흡착근-접촉면 간에 상호작용이 일어난다. 접촉면 상에 있는 거친 표면이나 간극 또는 미세한 틈 사이로 침적된 분비물질들에 의해 흡착근과 접촉면은 빈틈없이 밀착된다. 강력 착생한 흡착근조직 내 세포들은 이미 사멸되고, 접촉면에 분비된 물질과 뒤엉키며 수축되어 벽면에서 잘 분리되지 않는 강력한 착생구조체로 변형된다. 접촉면에 착생하였던 흡착근을 분리하여 하피 표면부위에 함유된 원소를 분석한 결과, 이들 흡착근조직의 표면부위에서 적벽돌을 구성하는 주요 성분들이 거의 검출되었다. 이는 착생 전 후 흡착근- 접촉면 사이에서 진행된 물리적인 밀착 및 부착이 구조적 변형과 성분간의 상호작용을 초래하는 것으로 밝혀졌다.

자이언트흑마늘의 유효성분 분석 (Analysis of Active Components of Giant Black Garlic)

  • 김담;김경희;육홍선
    • 한국식품영양과학회지
    • /
    • 제44권11호
    • /
    • pp.1672-1681
    • /
    • 2015
  • 자이언트마늘을 자이언트흑마늘로 숙성시킬 시에 새롭게 생성되거나 증강되는 유효성분을 측정하여 기존의 일반마늘 및 이를 숙성시킨 일반흑마늘과 비교 분석하였다. 일반성분 분석 결과 자이언트마늘에서 자이언트흑마늘로 숙성 후 수분은 감소하였으며 회분, 조단백, 조지방은 증가하였고, 일반마늘에서 일반흑마늘로 숙성 후에도 유사한 경향을 보였다. pH는 숙성 후 감소하였고 산도는 증가하는 경향을 보였다. 총당은 숙성 후 증가했지만 자이언트흑마늘과 일반흑마늘 간에 큰 차이가 없었으며 환원당의 경향도 유사하였다. 총 피루브산의 함량은 숙성 후에 증가하는 것을 볼 수 있었으며, 자이언트흑마늘이 일반흑마늘에 비하여 더 높은 값을 나타냈다. 구성 아미노산 측정 결과 자이언트마늘이 자이언트흑마늘로 숙성 후에 histidine, lysine, arginine을 제외한 모든 아미노산이 많게는 2배 이상 증가하였으며, 자이언트흑마늘이 일반흑마늘보다 숙성 후 총 아미노산 함량의 증가비율이 더 높았다. 자이언트흑마늘이 일반흑마늘보다 arginine, cysteine, lysine, phosphoethanolamine, urea를 제외한 유리 아미노산의 함량이 더 높은 값을 나타냈으며 자이언트마늘이 자이언트흑마늘로 숙성 후에 taurine, phosphoethanolamine, ${\beta}$-alanine, ethanolamine이 신규 생성 되었다. 무기질의 측정 결과 자이언트마늘이 자이언트흑마늘로 숙성 후에 구리, 철, 마그네슘, 나트륨이 증가하였다. S-Allyl-L-cysteine의 함량은 자이언트흑마늘이 자이언트마늘에 비해 약 4배 증가했으며 일반흑마늘보다 높은 값을 나타내었다. S-Allylmercaptocysteine도 마찬가지로 숙성시에 함량이 크게 증가하는 것을 확인할 수 있었다. 따라서 본 연구 결과는 자이언트마늘의 가공에 대한 기초자료로써 활용될 수 있을 것으로 사료된다.