• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.65-73
• /
• 2000

Casting of metal matrix composites is an attractive process since it offers a wide selection of materials and processing conditions. Among the casting methods, melt-stirring technology is much attractive route in industrial application because it is more simple and inexpensive compared to squeeze casting or powder metallurgy. In the present work, effects of particle size, volume fraction of particles and mg addition on mechanical properties and thermal expansion coefficients of $\alpha$ -$Al_2O_{3(p)}$/LXA composites were studied. It is shown that $\alpha$ -$Al_2O_3$ particles formed at the interface of $\alpha$ -$Al_2O_3$ particles and matrix made an important role on mechanical properties. Ultimate tensile strength of most composite materials was not increased. But in the case of 5vol% addition of 16$\mu\textrm{m}$ $\alpha$ -$Al_2O_3$ Particle, Ultimate tensile strength of composite materials with 3wt.% Mg was increased. Volume fraction of reinforcements and mg content were thermal expansion coefficients of composite materials were decreased.

• The Korea Journal of Herbology
• /
• v.28 no.1
• /
• pp.65-71
• /
• 2013

Objectives : Asthma is a chronic, complex respiratory disease, caused by airway obstruction, airway eosinophilic inflammation(AEI), and airway hyperresponsiveness(AHR). This study was conducted to determine whether oral administration of crude water extracts of Pinellia ternate Breitenbach(PTB) has an antiasthmatic potential in the treatment of asthma in mice. Methods : Asthmatic AEI and AHR were induced by systemic sensitization to ovalbumin(OVA) by intratracheal instillation with 0.1 mg/mL suspension of diesel exhaust particles(DEP) once a week for 10 weeks in BALB/c mice. Crude PTB water extracts(50 mg/kg and 200 mg/kg) were orally administered 5 times a week for 10 weeks. Cyclosporin(10 mg/kg) was administrered the same manner as a positive control. Results : Long-term treatment with crude PTB water extracts suppressed the infiltration of inflammatory cells, including eosinophils, into airways from blood. It also reduced asthmatic AEI and AHR by attenuating the increase in the levels of cytokines such as interleukin(IL)-4, IL-5 and IL-13 in bronchoalveolar lavage fluid(BALF), as well as the levels of histamine and OVA-specific IgE in blood. However, the effect of crude PTB water extracts(200 mg/kg) was not likely to be stronger than that of cyclosporin(10 mg/kg). Conclusion : These results suggest that crude PTB water extracts have inhibitory effects on AEI and AHR in a mouse model of asthma and may act as a potential Th2 cytokine antagonist, and have a therapeutic effect on allergic asthma.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.97-106
• /
• 2020

Swelling properties and shear strength behavior of MgO-Sand mixtures with hydration procese of MgO are compared according to different MgO contents (W_MgO/W_Total=0, 30, 50, 70, 100%) in this study. The specimens are prepared by mixing with crushed MgO refractory bricks and silica sand. After hydration, the particle size and the specific gravity of MgO were decreases. Through microstructure observation and X-ray diffraction analysis, it is confirmed that MgO changes from the cubic structure of Periclase to the hexagonal cubic structure of Brucite after hydration. As the MgO content increases, both swelling rate and swelling pressure of the mixtures increase. W_MgO/W_Total=30% specimen shows relatively low swelling pressure and swelling rate because produced Mg(OH)₂ mainly fills the pores between sand particles. However, in the case of MgO more than 50%, swelling pressure and swelling rate increase significantly because Mg(OH)₂ fills the pores of sand particles at first and then either pushes out sand particles or Mg(OH)₂ particles after filling the pores. As a result of the direct shear test, before hydration, the mixtures show a dilative behavior on high MgO contents and a contractive behavior on low MgO contents. However, after hydration, the behavior of all mixtures changes to contractive behavior. The threshold fraction of fine (i.e., Mg(OH)₂) contents of the hydrated MgO-Sand mixtures reveals approximately 60% compared with normalized shear strength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1083-1086
• /
• 2004

We applied the spray pyrolysis technique to prepare Mn-doped $BaMgAl_{10}O_{17}$ (BAM) particles with high photoluminescence, which could be used in the plasma display device as a green phosphor. Several preparation conditions were investigated in order to tail the vacuum ultraviolet (VUV) characteristics. Some portions of barium were replaced with strontium to improve the luminescent intensity of BAM:Mn particles under VUV excitation. The content of Mn and Sr was optimized to obtain high luminescent efficiency under VUV excitation. Finally, the optimized BAM:Mn green particles showed higher photoluminescence intensity than that of commercial $Zn_2SiO_4$ and comparable with commercial barium-aluminate phosphor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.5 no.2
• /
• pp.72-83
• /
• 1989

Twenty-five atmospheric particulates were collected using a high volume aerosol sampler from Septermber to December, 1988 on a site located on the West coast of Korea and analysed for twelve elements (Na, Mg, Al, Mn, Fe, Cu, Co, Ni, Zn, Ag, Cd, and Pb) by AAS. The particles being mainly crustal minerals, large quantity of spherical fly ashes were also observed. In order to identify the origin of trace metals in atmospheric particulates, enrichment factor, interelemental correlation and factor analysis were performed. Based upon these analysis, the twelve elements can be classified into three groups; the elements dominantly present in soil particles (Al, Mn, Fe, Co, and Ni), those in sea salt aerosols (Na and Mg), and those in air pollution-derived particles (Cu, Cd, Pb, Ag and Zn).

• Journal of Environmental Health Sciences
• /
• v.22 no.4
• /
• pp.55-61
• /
• 1996

Measurements of the seasonal variations of concentration and size distribution of TSP, $SO_4^{2-}, NO_3^-, Cl^-, NH_4^+, Na^+, K^+, Ca^{2+}$ and $Mg^{2+}$ were made by Andersen air sampler from May 1995 to April 1996 in Seoul. The size distribution of these ions was divided into four patterns. 1) Distribution was concentrated on fine particles over a year such as $NO_3^-$ component, 2) Distribution was predominated in coarse particles fraction over a year such as $Mg^{2+}$ and $Ca^{2+}$ components, 3) Distribution was differerent from various seasons such as $NH_4^+, SO_4^{2-}, Cl^-$ and $K^+$ components, 4) Distribution was bi-modal such as $Na^+$.

• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.247-258
• /
• 2018

The purpose of the present study was to investigate whether the degree of air pollution can be evaluated via examination of local plants. Selected sites included two parks in an industrial area, as well as two parks in an urban area. Selected plant samples comprised one-year-old pine shoot leaves. Leaves growing over 2 m from the ground were collected from over 10 pine trees. Leaf surface was analyzed for deposition of 14 trace elements and 16 polycyclic aromatic hydrocarbons (PAHs), including particle size and mass, surface imaging, precipitation-mediated particle removal rate, and concentration. Particle size ranged from 0.4 to $200{\mu}m$, and the volume percentage of particles ${\leq}10$ was 20 %. Deposited particle mass ranged from 0.450-0.825 mg, and precipitation-mediated removal rate ranged from 10.0-27.6 %. Trace element concentration, as measured by ICP/MS after microwave acid digestion, was 18.8-26.3 mg/kg As, 0.08-0.13 mg/kg Be, 0.06-0.08 mg/kg Cd, 4.91-17.8 mg/kg Cr, 5.26-405 mg/kg Cu, 1,930-2,670 mg/kg Fe, 3.03-28.1 mg/kg Pb, 26.9-42.8 mg/kg Mn, 2.66-10.4 mg/kg Ni, 4,560-8,730 mg/kg Al, 2,500-6,120 mg/kg Ba, 5.27-17.8 mg/kg Rb, 40.9-95.3 mg/kg Sr, and 4,030-8,260 mg/kg Zn. Concentration of PAHs, as analyzed by GC/MS/MS after liquid-liquid extraction and purification of deposited particles, ranged from 1.17 to 12.378 mg/kg for ${\Sigma}PAH_{16}$ and from 1.17 to 12.378 mg/kg for ${\Sigma}PAH_7$.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.4
• /
• pp.173-179
• /
• 2020

The purpose of this study was to investigate comparatively the microstructural characteristics and hardness of discontinuous precipitates (DPs) in Mg-9%Al alloy, which were formed by continuous cooling (CC) from 678 K to RT and isothermal aging (IA) at 413 K, respectively. In as-cast state, the Mg-9%Al alloy consisted of partially divorced eutectic β(Mg₁₇Al₁₂) particles with a small amount of DPs showing (α+β) lamellar morphology adjacent to the β particles. The DPs formed by CC had interlamellar spacings in a broad range of 0.85~2.12 ㎛ (1.51 ㎛ in average) owing to the various formation temperatures in response to continuous cooling process. Meanwhile, the DPs formed by IA had relatively narrower interlamellar spacings of 0.14~0.29 ㎛ (0.21 ㎛ in average), which is associated with the low and constant formation temperature. Thinner and higher volume fraction of β phase layers were noticeable in the DPs formed by IA. Higher hardness values were obtained in the DPs formed by IA than the DPs formed by CC, which may well be ascribed to the finer lamellar structure and higher β phase content of the DPs formed by IA.

• Journal of Sericultural and Entomological Science
• /
• v.33 no.2
• /
• pp.100-102
• /
• 1991

The features of waste water from by-product silk treatment of silk reeling process were investigated and the lipid extracted from waste water was analysed. The COD of waste water from by-product silk treatment was at the level of 605 mgO/$\ell$ Total Dissolved Solid Particles 2,335mg/$\ell$and Total Suspended Solid Particles 2,123mg/$\ell$. The lipid extracted from the waste water from by-product silk treatment was composed of triglyceride 76.8%, free fatty acids 12.5%, diglyceride 5.7% and free sterol 5.0%. In fatty acid composition of lipid, the content of loeic acid, linoleic and linolenic acid was 64.93%, whereas that of palmitic acid was 29.39% and stearic acid 4.93%.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.271-278
• /
• 1996

In this study, the effect of the transition elements on the microstructure and mechanical properties of rapidly solidified Al-Mg-X alloys was investigated. As a result of the rapid solidification processing, fine equiaxed grains with a mean diameter of 2 $\mu$m were observed in these alloys. Many fine particles were found to be distributed rather homogeneously throughout the matrix with relatively large particles occasionally at grain boundaries. The ultimate tensile strengths of Al-Mg-X alloys were found to decrease rather remarkably at 150 $^{\circ}C$ without the gain of the ductility at 150 $^{\circ}C$, which may result from segregation of $\beta$ ($Al_{3}Mg_{2}$) precipitates. Fine dimples were observed on the fracture surfaces for all alloy systems and the variation of the size and shape of dimples was not observed upon alloy systems. The ductility at 530 $^{\circ}C$ was found to be ~100%, suggesting that grain boundary sliding did not contribute to ductiliy despite he grain size stabilization. The absence of superplastic behavior may be associated with low boundary misorientation in rapidly solidified Al-Mg-X alloys.