• 대한화학회지
• /
• 제12권3호
• /
• pp.114-120
• /
• 1968

Fe-EDTA complex, which is easily formed when Fe salt and EDTA.2Na are mixed in the aqueous medium, is found to be a very effective catalyst in the dehydropolycondensation of aminophenols. In the dehydropolycondensation of aminophenols, the catalyst, Fe(Ⅲ)-EDTA complex (higher oxidation state) is reduced to less stable Fe(Ⅱ)-EDTA complex (lower oxidation state), and the latter is easily oxidized by air to the original higher oxidation state complex, therefore the catalytic action of Fe-EDTA complex is found to be recycled effectively. Under the catalytic action of the above mentioned complex, p-aminophenol is polymerized in the aqueous medium to form the oligomers of p-aminophenol, which the degree of polymerization to be 5 or more. The oligomers formed contain partly quinone nucleus as well as amino and hydroxyl groups. In this study, the effects of the solvents and characteristics of the oligomers are discussed. These types of polymerizations catalyzed by the metallic chelate compounds are considered to be very closely related to the reactions in the living matters.

• 방사성폐기물학회지
• /
• 제1권1호
• /
• pp.11-23
• /
• 2003

국내의 가동 중지된 우라늄 변환시설의 해체 시 우라늄 화합물로 오염되어 대량으로 발생될 금속폐기물의 재활용 또는 자체처분을 위한 제염기술로 전해제염 공정의 적용성을 평가하였다. 이를 위하여 우라늄 변환시설 내부설비의 주 구성 재료인 SUS-304 와 Inconel-600 금속시편을 대상으로 전해용해 실험을 수행하였다. SUS-304 와 Inconel-600 금속시편에 대한 전해용해 성능에 있어서 중성염 전해용액으로 $Na_2$SO$_4$가 가장 효과적이었으나, 우라늄변환시설의 가동 시 질산 매질과 주로 접촉했던 설비 표면의 이력과 시설 가동 중 발생한 우라늄 폐액의 성상을 고려하여 $Na_2$SO$_4$ 전해용액 내에서의 SUS-304 시편에 대한 전해용해와 비교해서 약 30%, 그리고 Inconel-600 시편에 대해서는 거의 동등한 성능을 보인 NaNO$_3$ 중성염 용액을 금속성폐기물의 전해제염 용액으로 선정하였다. 본 연구에서는 NaNO$_3$ 중성염 전해용액에서 전류밀도, 전해시간 및 전해 용액의 농도가 SUS-304 및 Inconel-600 금속시편의 전해용해 성능에 미치는 영향을 조사하였다. 이 실험결과를 바탕으로 실제 우라늄 변환시설로부터 인출하여 $UO_2$, AUC 및 ADU 등의 우라늄 화합물로 오염된 시편에 대해 전류밀도 100mA/$\textrm{cm}^2$, IM NaNO$_3$ 전해용액 내에서 전해 제염 실증시험을 수행하였으며, 오염물의 종류 및 오염준위의 대소와는 관계없이 모든 시편에 대하여 10분 이내의 짧은 시간 내에 자체처분 기준치 이하로 $\alpha$ 및 $\beta$ 방사능 준위를 감소시킴으로써 본 중성염 전해제염이 매우 성공적임을 확인하였다.nely regimented hierarchical language. I try, in this paper, to develop the idea that hierarchical regimentation of Korean language uses is not humane. 1 of for the main argument for the thesis as what follows: How could one justify the hierarchical regimentation of a language like Korean\ulcorner Only if there is an essential structure in which the fine grades of differences of social positions of all the people are distinct; The essentialism here involved is not plausible. And I may add that language is to be used fur the purposes of communication, rationalization and expression. If true, language use is a genuine art of liberation or humanization. Any overt hierarchical language tends to damage those purposes and more to enforce those oppressive elements already existing in the community. Then, a hierarchical language is to defeat its own purpose.중 행정부가 북한에 대해 실시한 포용정책이 어떠한 성과를 거두고 어떠한 문제점을 간과하고 있는가에 대해 논의하고, 대북 정책의 새로운 지평을 논의하는 것을 목적으로 하고 있다. 1) 포용 정책은

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.415-419
• /
• 2004

The electrode potential characteristics of a YSZ based membrane metal oxide electrode have been studied in molten LiCL at $700^{\circ}C$ by the potentiometric method. The electrode exhibited a good potential response to log[$O^2$] and data reproducibility. The calibration plot (potential vs. log[$O^2$] was found to be linear, obeying the Nernst equation. The electrode potential showed a good reversibility corresponding to increase/decrease of the oxide ion present in the molten LiCl. The physical and chemical durability appeared to be sound after several repeated uses, resulting in reproducible results. However, "the proposed electrode" failed when metallic Li was present in the melt.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.383-398
• /
• 2022

The electrochemical behavior was investigated during the electrolysis of nickel oxide in LiCl-Li₂O salt mixture at 650℃ by changing several components. The focus of this work is to improve anode design and shroud design to increase current densities. The tested components were ceramic anode shroud porosity, porosity size, anode geometry, anode material, and metallic porous anode shroud. The goal of these experiments was to optimize and improve the reduction process. The highest contributors to higher current densities were anode shroud porosity and anode geometry.

• 방사성폐기물학회지
• /
• 제18권3호
• /
• pp.415-420
• /
• 2020

Strontium is known as a salt-soluble element during the electrolytic oxide reduction (EOR) process. The chemical behavior of SrO during EOR was investigated via thermodynamic calculations to provide quantitative data on the chemical status of Sr. To achieve this, thermodynamic calculations were conducted using HSC chemistry software for various EOR conditions. It was revealed that SrO reacts with LiCl salt to produce SrCl₂, even in the presence of Li₂O, and that the ratio of SrCl₂ depends on the initial concentration of Li₂O dissolved in LiCl. It was found that SrO reacts with Li to produce Sr during EOR and that the reduced Sr reacts with LiCl salt to produce SrCl₂. As a result, the proportions of metallic forms were lower in Sr than in La and Nd under various EOR conditions. The thermodynamic calculations indicated that the three chemical forms of SrO, SrCl₂, and Sr co-exist in the EOR system under an equilibrium with Li, Li₂O, and LiCl.

• 방사성폐기물학회지
• /
• 제10권2호
• /
• pp.97-104
• /
• 2012

본 연구에서는 $850^{\circ}C$의 $CaCl_2$ 용융염계에서 전해환원공정을 통해 $TiO_2$로부터 금속티타늄을 제조하였다. Ni-$TiO_2$ 조합전극을 환원전극으로 그라파이트를 산화전극으로 사용하였으며, 셀전위를 제어하면서 $TiO_2$의 전해환원 특성을 관찰하였다. XRD 분석을 통해 $TiO_2$가 $CaTiO_3$, $Ti_2O$, $Ti_6O$와 같은 다양한 반응 중간생성물을 거쳐 Ti 스폰지로 환원되는 것이 밝혀졌다. 또한 SEM 분석을 통해 $TiO_2$ 전해환원 반응동안 펠렛의 바깥표면부터 환원반응이 시작되어 펠렛중심으로 진행이 되는 것이 확인되었다. 전해환원 반응도중 환원된 티타늄금속은 초기에는 다공성 스폰지 구조를 보이나 고온에서 반응이 진행됨에 따라 점차 소결에 의해 수축되어 다공성 구조가 사라지는 현상을 보였다.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.109-114
• /
• 2020

The photo-reflectance of aluminum and AISI 304 stainless steel during cyclic immersion test in 3 wt% NaCl solution was examined in this study. Overall, corrosion was not recognized by a visual inspection or weight measurement up to 310 h. When evaluated, it was noted that the roughness of the specimens did not change significantly. However, localized corrosion, which is located at the vicinity of intermetallic precipitation of aluminum or at the grain boundary of stainless steel, was confirmed by the use of an optical microscope and scanning electron microscopy after tens of hours of utilizing the corrosion test. In this respect, an increase of the peak intensity for metallic Al after 90 h of test, and for metallic Fe after 153 h was detected from the X-ray photoelectron spectra. In this context, it was shown that from the photo-reflectance spectra, the reflection of the visible light from the tested samples was changed noticeably over the test duration. As a result, the intensity of reflected light was decreased up to 90 h ~ 153 h, and thereafter was shown to increase higher than the initial intensity before the corrosion test.

• 설비공학논문집
• /
• 제23권7호
• /
• pp.483-491
• /
• 2011

When pipe components made of carbon steel in nuclear, fossil, and industry are exposed to flowing fluid, wall thinning caused by FAC(flow accelerated corrosion) can be generated and eventually ruptured at the portion of pressure boundary. A study to identify the locations generating local wall thinning and to disclose turbulence coefficient related to the local wall thinning was performed. Experiment and numerical analyses for tee of down scaled piping components were performed and the results were compared. In particular, flow visualization experiment which was used alkali metallic salt was performed to find actual location of local wall thinning inside tee components. To disclose the relationship between turbulence coefficients and local wall thinning, numerical analyses were performed for tee components. The turbulence coefficients based on the numerical analyses were compared with the local wall thinning based on the measured data. From the comparison of the results, the vertical flow velocity component(Vr) flowing to the wall after separating in the wall due to the geometrical configuration and colliding with the wall directly at an angle of some degree was analogous to the configuration of local wall thinning.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.646-651
• /
• 2008

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. It is essential to choose the optimum material for the process equipment handling molten salt. IN713LC is one of the candidate materials proposed for application in electrolytic reduction process. In this study, yttria-stabilized zirconia (YSZ) top coat was applied to a surface of IN713LC with an aluminized metallic bond coat by an optimized plasma spray process, and were investigated the corrosion behavior at $675^{\circ}C$ for 216 hours in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere. The as-coated and tested specimens were examined by OM, SEM/EDS and XRD, respectively. The bare superalloy reveals obvious weight loss, and the corrosion layer formed on the surface of the bare superalloy was spalled due to the rapid scale growth and thermal stress. The top coatings showed a much better hot-corrosion resistance in the presence of $LiCl-Li_2O$ molten salt when compared to those of the uncoated superalloy and the aluminized bond coatings. These coatings have been found to be beneficial for increasing to the hot-corrosion resistance of the structural materials for handling high temperature lithium molten salts.

• 대한화학회지
• /
• 제4권1호
• /
• pp.7-9
• /
• 1957

On sparking carbon-arc in water we found that a inflammable gas was generated. The object of this experiment is to prepare sols of metals by applying the gas mentioned to a solution of metallic salts. As the result of this experiment we found that : 1) By this method we can prepare easily some kinds of Ag-sol from $AgNO_3$ solution in about 30 sec. by adjusting the temperature, the quantity of stabilizer and the concentration of metallic salt. 2) The appropriate concentration of $AgNO_3$ is about 0.01% by volume, that of the stabilizer, 0.9104 N-NaOH is 0.03-2 cc/100 cc of 0.01% $AgNO_3$ solution. And the lower the temperature, the more concentrated the Ag-sol. But to check the possibility of applying this method to metals other than Au and Ag, measurement of the particle size and properties of a sol prepared by this method, should be studied. Especially, we must study what kinds of gases are generated by sparking the carbon-arc in water.