• Journal of Electrochemical Science and Technology
• /
• v.2 no.4
• /
• pp.204-210
• /
• 2011

Thin film electrodes have been intensively studied for active materials and current collectors to enhance the electrochemical performance. Here, porous structures of nickel-based oxide films, consisting of nickel oxide and copper (II) oxide, which was derived from the copper substrate during the annealing process, were deposited on metallic copper foils. The half-cell tests revealed excellent capacity retention after $80^{th}$ charge/discharge cycles. Some films showed an excess of the theoretical capacity of nickel oxides, which mainly originate from partially oxidized copper substrates during annealing. These results exhibit that both a preparation method of an active materials and partially oxidized current collectors could be important roles to apply thin film electrodes.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.69-70
• /
• 2006

In lithium-ion batteries, separator membrane's, main role is to physically isolate a cathode and an anode while maintaining rapid transport of ionic charge carriers during the passage of electric current. As far as battery safety is concerned, the electrical isolation of electrodes is most crucial since unexpected short-circuits across the membrane induces hot spots where thermal runaway may break out. Internal short-circuits are generally believed to occur by protrusions on the electrode surface either by unavoidable deposits of metallic impurities or by dendritic lithium growth during battery operation. Another cause is shrinkage of the separator membrane when exposed to heat. If separator membrane can be engineered to prevent the internal short-circuit, it will not be difficult to improve lithium-ion batteries' safety. Commonly the separators employed in lithium-ion batteries are made of polyethylene (PE) and/or polypropylene (PP). These materials have terrible limitations in preventing the fore-mentioned internal short-circuit between electrodes due to their poor dimensional stability and mechanical strength. In this study we have developed a novel separator membrane that possesses very high thermal and mechanical stability. The cells employing this separator provided noticeable safety improvement in the various abuse tests.

• Resources Recycling
• /
• v.30 no.2
• /
• pp.53-60
• /
• 2021

Leaching experiments from single metal and metallic mixtures were conducted to develop a process for the recovery of cobalt, copper, and nickel in spent lithium ion batteries. Inorganic and organic acid solutions without oxidizing agents were employed. No copper was dissolved in the absence of an oxidizing agent in the leaching solutions. The leaching condition to completely dissolve single metal of cobalt and nickel was determined based on acid concentration, reaction temperature and time, and pulp density. The leaching condition to dissolve all of cobalt and nickel from the metallic mixtures was also obtained. Leaching of the metallic mixture with methanesulfonic acid led to selective dissolution of cobalt at low temperatures.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.194-198
• /
• 1996

Detailed expermental studies of theelectronic structure of the valence and conduction bands of the mixed conductor $\beta$-LiAlindicate that a quasi-gap opens at the Fermi level, and the conduction states are highlylocalized, as opposed to the theoretical band structure calculations that predict predominant metallic behavior. Evidence for complex lithium migration effects involving the surface of Lial , induced by particle (electron or ion) bombardment and mechanical treatment , has been obtained as a byproduct of these experiments.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.73-80
• /
• 2022

Reduction smelting of spent lithium-ion batteries at high temperature produces metallic alloys. Following solvent extraction of the leaching solutions of these metallic alloys with either sulfuric or hydrochloric acid, the raffinate is found to contain Ni(II), Co(II), Mn(II), and Si(IV). In this study, two cationic exchange resins (Diphonix and P204) were employed to investigate the loading behavior of these ions from synthetic sulfate and chloride solutions. Experimental results showed that Ni(II), Co(II), and Mn(II) could be selectively loaded onto the Diphonix resin from a sulfate solution of pH 3.0. With a chloride solution of pH 6.0, Mn(II) was selectively loaded onto the P204 resin, leaving Ni(II) and Si(IV) in the effluent. Elution experiments with H₂SO₄ and/or HCl resulted in the complete recovery of metal ions from the loaded resin.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.173-177
• /
• 2000

The synthetic carbon was coated with tin oxide and copper by fluidized-bed chemical vapor deposition method. $(CH_3)_4Sn\;and\;Cu(hfac)_{2s}$ were employed as the metallic organic precursor, respectively. The modified synthetic carbons were used for lithium secondary battery anode to investigate their coating effects on electrochemical characteristics as alternative anode materials for lithium secondary batteries. The electrode which prepared by the synthetic carbons(MCMB) coated with tin oxide gave the higher capacity than that of raw material. Their capacity decreased with the progress of cycling possibly due to severe volume changes. But the cyclability was improved by coating with copper on the surface of the tin oxide coated carbon, which plays an important role as an inactive matrix buffering volume changes.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.965-967
• /
• 1999

In order to solve to instability in air and to format dentrite, we used carbonized phenol resin electrode which is amorphous carbon. The structure and properties of deeply Li-doped carbonized phenol resin have been investigated in association with their utilization as electrodes in rechargeable batteries. Resol type phenol resin used as starting material. The doped lithium was found neither in metallic nor in ionic states even in the most deeply doped state($C_{2.2}$Li stage). It has also been confirmed that the carbonized phenol resin electrode has a large capacity with good stability and reversibility. These results strongly suggest that the carbonized phenol resin can make an excellent anode material for secondary batteries. Finally, we discuss that the carbonized phenol resin doped up to the $C_2Li$ stage can exhibit an energy density per volume as high as lithium metal. We know that carbonized phenol resin can used as cathode as well as anode by cyclic voltammogram.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.51-57
• /
• 2010

As a recycling of Si sludge from Si wafer process, a Si-SiC-CuO-C composite material was synthesized and investigated as an anode material for lithium batteries. The Si sludge consisted of Si, SiC, machine oil, and metallic impurities. The oil and metal impurities was removed by organic washing, magnetic separation, and acid washing. The Si-SiC-CuO-C composite from the recovered Si-SiC mixture was prepared by high-energy mechanical milling. According to the electrochemical tests such as charge-discharge capacity and cycling behavior, it showed the improved cycle performance. The SiC and CuO-related phases were presumed to restrain the volume expansion of the anode and Fe, however, should be removed below 10 ppm prior to synthesis of the composite because it caused the capacity loss of the active material itself.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.2
• /
• pp.1-14
• /
• 2018

The recent increase in demand for lithium has led to the development of new brine prospects, The brines are hosted in closed salar basin aquifers of two types that are mature halite salars and immature clastic salars. Salar brines also contain other elements of commercial interest, most notably potassium and boron. As a result, there has been a plethora of new exploration projects focused on the brines hosted in the aquifers of the intermontane-closed basins. The estimate of lithium resources and reserves in these salars depends on a detailed knowledge of aquifer geometry, porosity, and brine grade. Because the resource is in a fluid state, it has the propensity to move, mix, rearrange itself relatively rapidly during the course of a project lifetime, and lower recovery factors compared with most metalliferous and industrial mineral deposits due to reliance on pumping of the brine from wells for extraction. This is unlike any other type of metallic mineral resource and hence a different approach specially focusing on hydrogeology and brine hydrology is required for these prospects.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.43-46
• /
• 2000

Nd:YAG laser of 355 nm wavelength, which amounts to 3.5 eV, produced by a harmonic generator was used to create Ag metallic particles as seeds for nucleation in photosensitive glass containing $Ag^+$ and $Ce^{3+}$ . The pulse widths and frequency of the laser were 8ns and 10 Hz, respectively. For crystalline growth, heat-treatment following laser irradiation was carried out at $570^{\circ}C$ for 1h. Then, the $LiAlSi_3O^8$ crystal phase appeared in the laser irradiated lithium aluminum silicate glass. We present the effect of laser-induced nucleation compared with spontaneous nucleation by heat treatment fur crystallization in the glass.