• Elastomers and Composites
• /
• 제40권1호
• /
• pp.12-21
• /
• 2005

본 연구에서는 CSM 에멀젼의 물성을 향상시키고자 금속성 가교제인 magnesium carbonate 및 calcium hydroxide를 첨가하여 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다, 금속성 가교제인 magnesium carbonate 및 calcium hyroxide 양이 증가함에 따라 CSM 에멀젼 필름은 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 금속성 가교제로 magnesium carbonate를 첨가하였을 때 calcium hydroxide에 비해서 다소 높은 가교밀도와 $T_g$ 값을 보였다. 하지만 CSM 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Magnesium carbonate 0.75% 그리고 calcium hydroxide 1.0% 첨가한 경우가 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였으나, 그 이상의 양을 첨가하였을 경우에는 오히려 감소함을 확인하였다. 그러므로 본 연구에서 CSM 에멀젼의 물성을 향상시키는데 적용되는 금속성 가교제로서 calcium hydroxide 보다 magnesium carbonate가 더 적당하며, 0.75% 첨가하였을 때 보다 향상된 물성을 얻을 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.5-12
• /
• 1990

Calcium phosphate ceramics have been applied intensively to orthopaedic and dental implants by virtue of their osteoconductive nature. In an attempt to enhance the bone implant intergrity and Eta utility, these ceramics are deposited onto the porous surface of metallic implants. The coating procedure and the ensuing phase transformations of the ceramic alter the mechanical properties and surface chemistry of the ceramic layers as well as those of the substrate. These structural and compositional differences are directly related to the interaction mechanisms at the surface-active ceramicbone interface. Material and processing induced influences on dissolution, electrokinetic behavior, ceramic-metallic substrate interface and boRe growth enhancement are presented.

• 환경위생공학
• /
• 제20권3호
• /
• pp.27-35
• /
• 2005

The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 -divinyl-benzene(DVB) with $1\%,\;4\%,\;and\;10\%$-crosslinking and macrocyclic ligand of cryptand type by copolymerization method and the adsorption characteristics of uranium(VI), calcium(II) and lutetium(III) metallic ions have been investigated in various experimental conditions. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of metallic ions were investigated. The uranium ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium $(UO_2^{2+})>calcium(Ca^{2+})>lutetium(Lu^{3+})$ ion. The adsorption was order of $1\%,\;4\%,\;and\;10\%$ crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.131-136
• /
• 2000

We have investigated the slurry induced metallic contaminations of undoped and doped silicate oxides surface on CMP cleaning process. The metallic contaminations by CMP slurry were evaluated in four different oxide films, such as plasma enhanced tetra-ethyl-orthyo-silicate glass(PE-TEOS), O3 boro-phos-pho-silicate glass(O3-BPSG), PE-BPSG, and phospho-silicate glass(PSG). All films were polished with KOH-based slurry prior to entering the post-CMP cleaner. The Total X-Ray fluorescence(TXRF) measurements showed that all oxide surfaces are heavily contaminated by potassium and calcium during polishing which is due to a CMP slurry. The polished O3-BPSG films presented higher potassium and calcium contaminations compared to PE-TEOS because of a mobile ions gettering ability of phosphorus. For PSG oxides, the slurry induced mobile ion contamination increased with an increase of phosphorus contents. In addition, the polishing removal rate of PSG oxides had a linear relationship as a function of phosphorus contents.

• Journal of Plant Biotechnology
• /
• 제35권4호
• /
• pp.337-343
• /
• 2008

We generated transgenic tomato plants with Arabidopsis thaliana $H^+$/cation exchanger gene (C4X4) by Agrobactrium-mediated transformation. We confirmed transgene copy number and transcription by Southern and Northern blot analyses. The intact CAX4-expressing tomato (Lycopersicon esculentum) fruits contained 63-71% more calcium ($Ca^{2+}$) than wild-type fruits. Moreover, ectopic expression of C4X4 in tomato fruits did not show any significant increase of the four kinds of metallic cations analyzed ($Mg^{2+}$, $Fe^{2+}$, $Mn^{2+}$, and $Cu^{2+})$. The C4X4-expressing tomato plants including their fruits did not show any morphological alternations during whole growth period. These results suggest the enhanced Ca-substrate specificity of CAX4 exchanger in tomato. Therefore, intact CAX4 exchanger can be a useful tool for $Ca^{2+}$ nutrient enrichment of tomato fruits with reduced accumulation of undesirable cations.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.333-339
• /
• 1995

The reduction and diffusion process(R-D process) is an economical way to produce the functional materials which contain rare-earth elements and has been applied to the production of rare-earth magnet meterials($SmCo_5$, $Nd_{15}Fe_{77}B_8$), magneto-optical(MO) target materials and hydrogen storage alloy, etc. However, because of difficult to control of the final composition, the R-D process has not been applied to production of the 2-17 type rare earth permanent magnet materials which contain several elements. Therefore, this work was as a basic study for the production of the 2-17 type rare earth permanent materials with composition $Sm(Co_{0.72}Fe_{0.21}Cu_{0.05}Zr_{0.03})_{7.9}$ by the R-D process, the following were mainy examined ; the amount of metallic calcium as a reductant, homogenization condition of the alloy after the R-D reaction, masuring of magnetic properties of the sample after step aging. The sample prepared by the R-D process contained a little more oxygen than that prepared by the melting method, however, showed almost the same magnetic properties.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.301-308
• /
• 2007

Silicate mineral serpentine with magnesium and calcium was selected as a mineral carbonation mediators for carbon dioxide storage. Serpentine has various metallic elements as an oxides form of magnesium, iron, calcium, aluminium etc. Magnesium and calcium could be carbonation salt preferentially than other metal component within serpentine. Systemic thermochemical treatment for serpentine could change physicochemical properties like a surface area and pore dimensions. Due to the rapid chemical reaction rate depended on dimensional values, carbonation formation could determined by surface property change of thermochemical treated serpentine.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.505-509
• /
• 2000

The purpose of this study was to evaluate the effects of $Ca(OH)_2$ and $CO_2$ additions on the corrosion of metal coupons(ductile iron, galvanized steel, copper and stainless steel). Corrosion rate and released metal ion concentration of ductile iron and galvanized steel decreased by adjusting alkalinity, calcium hardness and pH with $Ca(OH)_2$ & $CO_2$ additions on copper and stainless steel were less than those on ductile iron and galvanized steel. When ductile iron coupon was exposed to water treated with Ca(OH)$_2$&$CO_2$, additions, the main components of corrosion product formed on its surface were $CaCO_3$ and $Fe_2 O_3 or Fe_2 O_4$ which often reduce the corrosion rate by prohibiting oxygen transport to the metal surface.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.371-376
• /
• 2007

The features of precipitating reaction of fluorine have been examined under several aquatic conditions by employing calcium ion as a precipitant. Based on MINTEQ program, fluorine was found to exist in the forms of $H_2F_2$ and HF in strong acidic environment and change into $F^-$ with increasing pH. In the experimental condition, the precipitating reaction of fluorine progressed rapidly within a few minutes after the reaction started and reached its equilibrium in 10 minutes. As the addition of precipitant was increased, removal of fluorine by the formation of precipitate was promoted and its was also enhanced by the rise of pH. The precipitating reaction of fluorine was impeded when its initial concentration was low and X-ray analysis showed that the crystalline structure of precipitate was mainly $CaF_2$ with partly NaF. Coexisting phosphate in solution influenced the fluorine removal by impeding the precipitate formation and similar effect was found when metallic ion such as $Zn^{2+}$ was present with fluorine.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).