• 한국광학회지
• /
• 제29권6호
• /
• pp.268-274
• /
• 2018

본 연구에서는 1차원 포토닉 크리스탈과 금속-유기 구조체 (MOF) 물질인 Hong Kong University of Science and Technology(HKUST-1)을 이용한 수분 감지 컬러 센서를 제안한다. 1차원 포토닉 크리스탈은 주기적인 굴절률 변화에 의해 포토닉 밴드갭이 존재하고, 특정한 파장 대역의 광 성분을 차단 및 반사한다. HKUST-1의 굴절률은 건조한 환경과 습한 환경에서 그 값이 서로 다르다. 여기서 우리는 포토닉 밴드갭의 유무를 활용하여 FDTD 시뮬레이션으로 센서를 설계하였다. 광학 해석 결과, 투과된 광의 색 변환보다 반사된 광의 색 변환이 우수하여 반사된 광을 이용하였다. 그리고 포토닉 밴드갭의 중심 파장이 550 nm인 경우, 건조한 환경 대비 습한 환경의 최대 피크 값이 약 9.5배로 증가했으며, 무채색에서 녹색으로 색 변환이 가능하여 센서로의 특성이 우수하였다. 본 연구 결과는 MOF 물질의 수분 감지 컬러 센서로의 활용을 제시하였으며, MOF 물질의 나노 구조 설계로 산업 디바이스로의 활용성도 확대할 것이다.

• 청정기술
• /
• 제29권1호
• /
• pp.71-75
• /
• 2023

다공성 결정물질(예: 금속유기골격체(Metal-Organic Framework, MOF), 제올라이트(zeolite))로 만들어진 다결정성 분리막의 선택도는 일반적으로 크기가 1 nm 혹은 그 이상으로 알려진 비선택적 결정 간 결함, 즉 결정립계의 존재 때문에 저하된다. 본 논문에서는 다결정성 MOF 분리막 위에 폴리다이메틸실록산(polydimethylsiloxane, PDMS)의 코팅이 결정립계를 캡핑하여 분리막의 선택도를 향상시키는데 효과적임을 증명하였다. 제안된 개념을 증명하기 위해서 in-situ 용매열 합성법을 통해 제조된 지르코늄 기반의 MOF의 일종인 UiO-66 분리막 위에 PDMS를 코팅한 후, 코팅 전후의 성능변화를 관찰하였다. PDMS 코팅 후 UiO-66 분리막의 CO₂/N₂ 단일 기체 분리 선택도는 6에서 14로 증가하였고, 동시에 CO₂ 투과도는 5700 GPU에서 33 GPU로 감소하였다. 선택도의 증가는 PDMS 코팅이 결정립계 결함을 효과적으로 메웠음을 의미하며, 동반된 투과도의 감소는 PDMS 코팅이 결함을 메우는 동시에 분리막 위에 연속적인 층을 형성하여 추가된 투과 저항에서 비롯되었다고 판단된다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.68-68
• /
• 2011

A new chemosensor based on rhodamine B (1) for $Hg^{2+}$ and $Cu^{2+}$ was synthesized by one-step condensation reaction of rhodamine B hydrazide and Azo dye. Studying for its fluorogenic and colorimetric behaviors towards various metal ions, extreme sensitivity and selectivity were achieved by the detection of $Hg^{2+}$ and $Cu^{2+}$ over other commonly coexistent metal ions, which were accompanied by ring opening of a rhodamine spirocycle framework. In acetonitrile, the presence of $Hg^{2+}$ and $Cu^{2+}$ induces the formation of a Dye 1-ion complex, which was deduced by spectroscopy.

• 에너지공학
• /
• 제24권2호
• /
• pp.51-54
• /
• 2015

The mesoporous metal organic framework structure of Ni-BTC was successfully synthesized in a low temperature and short operation time via hydrothermal synthesis process. Such operational route virtuously consumed less electrical and thermal energy. It proved time saving along with acceptable product yield (38%). The product was characterized through FESEM, FT-IR, XRD and $N_2$ gas adsorption measurement. Hightemperature stability of synthesized MOF was gauged by diffraction indexing of XRD patterns of as synthesized and heat treated samples of MOFs. The mathematically calculated particle size of Ni-BTC was found to be 42nm.

• 에너지공학
• /
• 제24권2호
• /
• pp.55-58
• /
• 2015

The mesoporous metal organic framework structure Fe-BTC was successfully synthesized by hydrothermal process with noticeable yield. The synthesis operation was conducted at intermediate temperature and for shortened operation time as compared to conventional procedures. This process approach with reduced operating temperature and shortened operation time may open an opportunity window towards process economy with reduction in energy consumption. A simple mathematical approach of diffraction indexing using X-ray diffraction patterns of synthesized powder was employed to confirm its crystalline nature and to investigate its high temperature stability. The crystallite size was calculated by using Debye-Scherrer equation.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2947-2952
• /
• 2013

Three coordination polymers, [$ML_2(H_2O)_2$] (M = Co (1), Ni (2), Mn (3)), were prepared from metal acetates ($M(CH_3COO)_2{\cdot}4H_2O$) and 3-pyridinepropionic acid ($HL=(3-py)-CH_2CH_2COOH$) by solvent-layer methods. By contrast, a discrete molecular compound, trans-[$Pd(HL)_2Cl_2$] (4), was synthesized by replacing benzonitrile (PhCN) ligands in trans-[$Pd(PhCN)_2Cl_2$] with HL under microwave-heating conditions. Compounds 1-3 have a 2D framework, and compound 4 contains a square-planar Pd metal.

• Structural Engineering and Mechanics
• /
• 제88권5호
• /
• pp.405-417
• /
• 2023

This paper reveals theoretical research to the nonlinear dynamic response and initial geometric imperfections sensitivity of the spinning graphene platelets reinforced metal foams (GPLRMF) cylindrical shell under different boundary conditions in thermal environment. For the theoretical research, with the framework of von-Karman geometric nonlinearity, the GPLRMF cylindrical shell model which involves Coriolis acceleration and centrifugal acceleration caused by spinning motion is assumed to undergo large deformations. The coupled governing equations of motion are deduced using Euler-Lagrange principle and then solved by a combination of Galerkin's technique and modified Lindstedt Poincare (MLP) model. Furthermore, the impacts of a set of parameters including spinning velocity, initial geometric imperfections, temperature variation, weight fraction of GPLs, GPLs distribution pattern, porosity distribution pattern, porosity coefficient and external excitation amplitude on the nonlinear harmonic resonances of the spinning GPLRMF cylindrical shells are presented.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3111-3114
• /
• 2012

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.467-477
• /
• 1994

The objective of this research is to develop a manufacturability measurement model for process and material screening. The process and material screening is the key requirement for implementing the Design for Manufacturability (Concurrent Engineering). A computerized system realizing this model then is developed to aid designers. Identification of the key factors which influence technical manufacturability, decision variables and their characteristics, conceptual framework for implementing the model are suggested. Manufacturability measure for quantifying the consistency of between the product requirements and the manufacturing capability is important contribution of this research. The focus is on net shape manufacturing process such as diecasting, forging, metal forming and injection molding.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1585-1589
• /
• 2002

Two novel calixarene-based fluoroionophores were synthesized. Their conformations were confirmed to 1,3-alternate by X-ray crystal structures. From CHEF by blocking the PET mechanism in fluorescence spectra, we observed $In^{3+}$ and $Pb^{2+}$ selectivity over other metal ions. For $In^{3+}$ion, calix[4]-bis-azacrown-5 showed about 20 times more sensitive than calix[4]-mono-azacrown-5 because the source of the binding selectivity comes from the calixarene framework and azacrown ligand by controlling the fluorescence and PET mechanisms as-sociated with the amine moiety.