• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.444-451
• /
• 2013

In this paper, experimental results were presented on the moment resistance of a concealed timber post base joint aimed at replacing in a modern design introduced lately the wood to wood joints used in the traditional Korean timber house - Hanok. Preliminary results showed that the original configuration of the joint offers a limited moment resistance and a low ductility and energy dissipation. In an attempt to mitigate those limitations without undergoing major changes in the connector, three new configurations were proposed and investigated. Motivated by the wish to prevent the early failure in welds, a first approach consists in directly bolting the connector's upper plate to lower the stress on the weak welds. Alternatively, another approach focused on increasing the strength of these welds by extending their length to the full width of the metal wings. Finally, a third configuration investigated the effect of those two approaches combined. In conclusion, reinforcing the welds found out to be the best option among the presented ones. As a result, this connector considered to show proper ability for use in earthquake-resistant structures with suited lateral-resistant structural elements.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.213-219
• /
• 2010

The research, based on 200 cases of small interior works in6 different floor area types of apartment in Busan, intended to compare the architectural work with the breakdown structure and analyze the cost of general small-scale interior work, by work type. The outcome of the research is outlined as follows. (1) Given the cost of small interior works for apartmentsranges from 10 million to 15 million won, which correspond to apartments ranging in size from $79.2m^2$ (24PY) to $105.6m^2$, it is necessary to implement a cost analysis for material cost and labor cost for these two types. (2) Given that small interior work for apartments comprises mostly finishing work, unlike the categoriesof general architectural work, it is more reasonable to classify the works into 9 categories,which include embellishment, wood, tile, paint, metal, toilet, sink & furniture, electric & mechanical and other works, instead of the 22 divisions stipulated in the Korean Architectural Standard Specification. (3) After reviewing the average cost of small interior work and rate by floor area, it was found thatthe average cost of 24PY was 10.5 million won, of which metal work accounts for 12.8%, embellishment work 17.8%, and toilet 19.7%, while sink & furniture appeared to be the highest with 22.1%, while for 32PY, average cost was 12.5 million won,which comprises 7.4% wood work, sink & furniture 20.2%, toilet 23.4% and embellishment work the highest at 28.6%, indicating that embellishment work accounts for the greater portion.

• Korean Institute of Interior Design Journal
• /
• no.22
• /
• pp.92-101
• /
• 2000

This study aims to inquire into the expressive characters of Shiro Kuramata's works regarding his design languages. His design languages, based on sentimentality and aesthetics characteristic of the orient and his unique memories and experiences, can be defined as nongravitation, fioatation and transparency. And the definition can be completed by his unique extinguishing technique, eliminating the structure with materials without feature, such as glass and acrylic and expanded metal, steel mash and 'Star piece Terrazzo' a material which he has invented. This study examines Shiro Kuramata's design works from the late 1960's to 1991, the year of his death, the background of his growth and the art and people who have influenced him. It also looks into the indigenous cultural background and his unique memories and experiences. The study also considers his furniture works and interior design to read his languages properties of the materials and expressive techniques. The study presents data on Shiro Kuramata and puts forwards the significance of his works and tries to lead the way of the interior design by application techniques of materials.

• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.15-20
• /
• 2015

Unlike a typical metal spring, a gas spring uses compressed gas contained in a cylinder and compressed by a piston to exert a force. A common application includes automobiles where gas spring are incorporated into the design of open struts that support the weight of tail gate. They are also used in furniture such as office chairs, and in medical and aerospace applications. The gas spring works by the application of pressurized gas (nitrogen) contained in a cylinder. The internal pressure of the gas spring greatly exceeds atmospheric pressure. This differential in pressure exists at any rod position and generates an outward force on the rod, making the gas spring extend. In this paper, we investigated the dynamic characteristics of a gas spring on an automotive tail gate system.

• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.364-371
• /
• 2012

I designed a dietary life kitchen utensils which is focused by the shape of split bamboo that has meaning of health and safety and the shaman who is the religion and incantation performer, and who solve problems, which are impossible to solve in common methods, by borrowing the power and granting the meaning which is connected with transcendent existence and principal. Having closest relation with human being's diet culture is being changed with adding beauty instead of the part of simple practical aspect in our normal life. I tried to show incantation effect with keeping the characteristic of kitchen utensils by granting the symbolic meaning of shamanism which is the shelter that is projected the desire of human beings. the materials were produced of an ebony and steel and varnished with lacquer for coloring. For hand shape, which is hard to treat in irregular forms, the religious image of shamanism was formed by casting which expresses the touch of an ebony and the cold characteristic of metal. an overall design doesn't detail excessively distort or largely transform the form of dietary utensils, keeps its individuality, and emphasizes the image by figuring a grip part which a human can see and a body can approach. in addition, I try to show a point that shamanism has affected human life for long time and symbolic meaning of bamboo-shape shows health and safety. And these things vest with each dietary life tools and should be the role of enzyme about the effect of human life.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.96-103
• /
• 2009

The roll forming process is commonly used for the conventional 'Fe' metal products such as a furniture drawer guide or an up-down slide guide. Recently its applications are variously expanded to the sanitary facilities or electronic devices. It is essentially required the cleanness for the high technology application and any corrosion or rust are not allowed. Therefore, in those applications the stainless steel materials are strongly demanded as the substitution of 'Fe' steel. However the mechanical properties of stainless steel are not suitable for forming process compared with those of 'Fe' steel. Up to now, the conventional F.E.M.(Finite Element Method) has been used to analyze and design the roll forming process. The purpose of this research is to obtain the proper production process and the shape of rolls to manufacture the high precision slide rails made of stainless steel material. The commercial program, SHARPE-RF, is used to analyze the entire roll forming process. The results show that the rolling process and the roll design by F.E.M. are useful from the good agreement between the shapes of products estimated by F.E.M. and those of the actual products.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.80-86
• /
• 2012

From 1982, the Korean Ministry of Employment and Labor has executed the risk assessment regulation for manufacturing industries. When a manufacturing company install, transfer, or modify the major facilities, the program inspects and verifies safety of the working place to ensure safety against risks. This study performed cost-benefit analysis of the program for the eight industrial categories that were free from the program. The cost-benefit analysis is the basic method to estimate the effect of the policy execution, and used to justify the policy effectiveness. As a result, there is the biggest benefit in the manufacture of basic metal products and then motor vehicles, trailers and semitrailers, other manufacturing, other machinery and equipment, wood products of wood and cork, rubber and plastic products, food products, furniture in order. Thus the hazard prevention program should be applied into the 8 industrial categories in order to strengthen national competitiveness, protect labors's safety, reduce the social cost and improve the welfare.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.114-121
• /
• 2005

Louis 1. Kahn was a wise architect who learned from history. He developed his own unique architecture by combining his creative sense with design principles and vocabularies that can be found in historical architecture. When restricting a space, he surrounded the space with thick walls as it had been done in historical buildings. The interior space encompassed by this method became a center-oriented and stable space. The objective of this study is to find the characteristics of Kahn's interior spaces by analyzing his projects in terms of space, form, daylight and materials. For this purpose, five works that are considered to have significance from the aspect of interior design were selected and analyzed. The characteristics realized through this study are as follows. A) Spatial features: 1) Generally speaking, each required space has been arranged symmetrically. 2) Being clearly defined as the main space, the subsidiary space, or the service space, each space also was placed very functionally. 3) The space encompassed by thick walls became a center-oriented, stable space. And in most case, it was characterized as a dark space. B) Formative features: 4) The space was defined as a basic solid such as a cylinder, a hexahedron, and an octagonal box, and was developed into a complex shape by the recessed windows. 5) Historical vocabularies such as an arch, a vault, and a dome were reinterpreted in new ways by kahn's own eyes. 6) Haying diverse shapes, the skylights enrich the space in terms of form. C) Daylight feature: 7) The vertical light entering through the skylights creates a solemn and mysterious atmosphere. 8) Given the shadows from the windows that change according to time, the interior space becomes a very vivid space. D) Material feature: 9) Harmonized with cold and smooth materials such as exposed concrete, metal, and glass, the interior space provides a modern atmosphere. 10) Warm appearing wood was used for furniture and part of walls or floors. The effective use of wood takes on a role that is quite complementary to the cold ambience of the smooth and cold materials. 11) With flexibility In building shapes, the concrete becomes the form-endowing materials.

• Archives of design research
• /
• v.14 no.2
• /
• pp.197-207
• /
• 2001

A designed object reveals its meaning and image through form, color and material. Among these three elements, material has more powerful influence with its tactile and visual characteristics. In Korea, traditionally materials itself were mainly used to design artifacts rather than various color or formal decoration. The purpose of this study is to investigate the Korean traditional materials, and to classify them by the characteristics of their texture. For this study, the pictures of Korean traditional artifacts were collected from the national museums and literature. Those are architectural and interior elements, furniture, cloths and textiles, arts and crafts. Total of 533 collected artifacts were classified into seven categories, metal, day, stone, paper, wood, straw, fabric things. : 59 metal things, 115 clay things, 62 stone things, 73 paper things, 80 wood things, 47 straw things, 97 fabric things. Each materials were classified into its forming methods and surface treatment focused on the he characteristics of their surface texture. Throughout this study, the uniqueness of forming method and surface treatment of each materials in Korea has been clarified. And furthermore the classification by this various traditional methods of materials will provide plentiful information and ideas to today's designers of the world.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.377-384
• /
• 2016

There are physical and chemical method for removement of a lacquered layer existing on the surface when gilding an iron Buddha, these caused environmental pollution by surface degradation and is very noxious for conservation scientist's health. Thus, on this study, we conducted a lacquered layer removement experiments using Nd:YAG Laser which is contactless and eco-friendly. Specimens were made by polishing $5{\times}5$ size of iron(99.9%) specimens surfaces evenly and by differing of number of coating of unrefined lacquer, so there were thickness differences of $10{\mu}m$, $20{\mu}m$, and $30{\mu}m$. The laser machine used in this study was Nd:YAG Laser, and we used two wavelength modes; 1064 nm(160~180 mJ) for infrared light region and 532 nm(50~350 mJ) for ultraviolet light region. The experiment done by investigating the transition of specimens' surfaces with laser wavelength, energy, and numbers of investigation. The remain amount of lacquered layer surfaces before/after laser irradiation was investigated by stereoscopic microscope, observation by SEM, Non-contact Surface Roughness Measurement Device, and FT-IR etc. As a result of each analysis, we could verify the thickness of $10{\mu}m$, $20{\mu}m$ of lacquered layer removed without surface degradation when using 1064 nm wavelength with $1.0J/cm^2$ density. We could find out that Nd:YAG Laser is effective for removing remained lacquered layers when gilding an iron Buddha. In the future, when not only the metal has made various studies also wood lacquered furniture or the like, it seems to be utilized to remove the lacquer without surface damage.