• Journal of Welding and Joining
• /
• 제23권2호
• /
• pp.52-58
• /
• 2005

This study was carried out to investigate the effect of bonding temperature and heating rate on transient liquid phase diffusion bonding of Ni-base superalloy. The heating rate was varied by $0.1^{\circ}C$/sec, $1^{\circ}C$/sec, $10^{\circ}C$/sec to the bonding temperatures $1100^{\circ}C,\;1150^{\circ}C,\;1200^{\circ}C$ under vacuum. As bonding temperature increased, maximum dissolution width of base metal increased, but a dissolution finishing time decreased. The eutectic width of insert metal in the bonded interlayer decreased linearly in proportion to the square root of holding time during isothermal solidification stage. The bonding temperature was raised, isothermal solidification rate slightly increased. As the heating rate decreased and the bonding temperature increased, the completion time of dissolution after reaching bonding temperature decreased. When the heating rate was very slow, the solidification proceeded before reaching bonding temperature and the time required for the completion of isothermal solidification became reduced.

• 방사성폐기물학회지
• /
• 제16권4호
• /
• pp.421-429
• /
• 2018

본 연구에서는 하이드라진 기조의 환원성 제염제를 이용한 마그네타이트 산화물의 용해를 다루고 있다. 마그네타이트로부터의 Fe(II) 및 Fe(III)의 용해는 protonation, surface complexation 및 reduction에 의해 지배를 받는다. 하이드라진과 황산은 산소결합을 파괴하거나 Fe(III)이온을 Fe(II)이온으로 환원시키기 위한 수소 및 전자를 각각 제공하게 된다. 속도론적 관점에서 보다 효율적인 용해를 위하여 다수의 전이금속의 영향을 분석하여 Cu(II) 이온이 효과적임을 확인한 바 있다. Cu(I) 이온은 Cu(II) 이온으로 산화되는 동안 전자를 방출하여 Fe(III) 이온을 환원시키고 다시 하이드라진에 의해 Cu(I) 이온으로 환원되게 된다. 본 연구를 통해 제염용액에 매우 적은 양의 구리 이온 (약 0.5 mM)을 첨가함에 따라 평균 40% 용해속도가 향상됨을 확인하였고, 특히 특정 조건에서는 70% 이상 용해속도가 향상 됨을 확인하였다. 구리 이온이 하이드라진과 배위결합을 이루는 지에 대해서는 아직 명확하지 않으나, 분명한 것은 $Cu(II)/H^+/N_2H_4$으로 이루어진 제염제는 효과적인 용해성능을 가지고 있다는 것이다.

• 한국토양환경학회지
• /
• 제3권1호
• /
• pp.55-63
• /
• 1998

본 연구에서는 광산 인근 토양에서 산성비를 비롯한 침출수에 의한 지하 환경 오염 메카니즘을 검토하고, 오염 방지 및 교정과 대안의 효과를 정량화 하기 위한 방안을 고찰하였다. 이를 위하여 중금속인 비소의 오염도가 높은 토양을 대상으로 인위적 산성용액에 의한 비소의 용출을 실험적으로 검토하였다. 한편, 산성 침출오염수에 의한 지하 환경의 오염을 방지하기 위하여 석회석을 활용한 토양의 안정화방법의 효과를 살펴 보았다. 오염된 시료토양에 포함된 비소는 pH 1이하의 강산성 용액일수록 격렬히 용출되었으며, pH 값이 낮아질 수록 최대 용출량은 증가되는 것으로 나타났다. 석회석에 의한 토양 안정화방안은 매우 효과적이었으며, 석회석에 의한 산성용액의 중화반응 특성식은 미반응 핵 모델중에서 화학반응이 속도지배인 특성식에 잘 부합되는 것으로 보여진다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.161-166
• /
• 2002

Bioremediation of trace metals in groundwater may require the manipulation of redox conditions via the injection of a carbon source. To simulate the numerous biogeochemical processes that will occur during the bioremediation of trace-metal-contaminated aquifers, a reactive transport model has been developed. The model consists of a set of coupled mass balance equations, accounting for advection, hydrodynamic dispersion, and a kinetic formulation of the biological or chemical transformations affecting an organic substrate, electron acceptors, corresponding reduced species, and trace metal contaminants of interest, uranium in this study. The redox conditions of the domain are characterized by estimating the pE, based on the concentrations of the dominant terminal electron acceptor and its corresponding reduced specie. This pE and the concentrations of relevant species we then used by a modified version of MINTEQA2, which calculates the speciation/sorption and precipitation/dissolution of the species of interest under equilibrium conditions. Kinetics of precipitation/dissolution processes are described as being proportional to the difference between the actual and calculated equilibrium concentration.

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.423-428
• /
• 2001

The bonding phenomena of Ni base single crystal superalloy. CMSX-4 during transient liquid phase(TLP) bonding was investigated using MBF-80 insert metal. Bonding of CMSX-4 was carried out at 1,373∼1,548K for 0∼19.6ks in vacuum. The (001) orientation of each test specimen was aligned perpendicular to the bonding interface. The dissolution width of base metal was increased when the bonding temperature and holding time were increased. The eutectic width diminished linearly with the square root of holding time during isothermal solidification process. Borides were formed in the bonded layer during TLP bonding operation. The solid phase grew epitaxially into the liquid phase from substrates and single crystallization could be readily achieved during the isothermal solidification.

• Journal of Microbiology and Biotechnology
• /
• 제13권3호
• /
• pp.323-331
• /
• 2003

Bacteria and fungi are fundamental biotic components of natural biogeochemical cycles for metals and metalloids, and play important roles in dissolution, precipitation, oxidation and reduction processes. Some processes catalyzed by microorganisms also have important applications in environmental biotechnology in the areas of ore leaching and bioremediation.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2015년도 추계학술논문요약집
• /
• pp.375-376
• /
• 2015

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.585-588
• /
• 2005

The dissolution characteristic of metal shows the different tendency according to the applied electrical potential, the kind of electrolyte and pH value, etc. In the micro electrochemical machining (ECM), unfavorable oxide/passive layer formation and overall corrosion of electrodes must be prevented. The anodic polarization curve of nickel has distinct three dissolution regions, i.e. two active regions and the transpassive dissolution region. In this paper, the stable electrode potentials of workpiece and tool were determined in sulfuric acid and hydrochloric acid solution, respectively. In each solution, different machining property was shown and possible electrochemical reactions were discussed. On the basis of this experiment, the methodology to obtain the proper electrode potential was suggested.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.411-417
• /
• 1999

The interfacial chemical behavior, lattice exchange and dissolution, of $FeS_{(S)}$ as one of the important sulfide minerals was studied. Emphases were made on the surface characterization of hydrous $FeS_{(S)}$, the lattice exchange of Cu(II) and $FeS_{(S)}$, and its effect on the dissolution of $FeS_{(S)}$, and also affect some organic ligands on that of both Cu(II) and $FeS_{(S)}$. Cu(II) which has lower sulfide solubility in water than $FeS_{(S)}$ undergoes the lattice exchange reaction when Cu(II) ion contacts $FeS_{(S)}$ in the aqueous phase. For heavy metals which have higher sulfide solubilities in water than $FeS_{(S)}$, these metal ions were adsorbed on the surface of $FeS_{(S)}$. Such a reaction was interpreted by the solid solution formation theory. Phthalic acid(a weak chelate agent) and EDTA(a strong chelate agent) were used to demonstrate the effect of organic lignads on the lattice exchange reaction between Cu(II) and $FeS_{(S)}$. The $pH_{zpc}$ of $FeS_{(S)}$ is 7 and the effect of ionic strength is not showed. It can be expected that phthalic acid has little effect on the lattice exchange reaction between Cu(II) and $FeS_{(S)}$. whereas EDTA has very decreased the removal of Cu(II) and $FeS_{(S)}$. This study shows that stability of sulfide sediments was predicted by its solubility. The pH control of the alkaline-neutralization process to treat heavy metal in wastewater treatment process did not needed. Thereby, it was regarded as an optimal process which could apply to examine a long term stability of marshland closely in the treatment of heavy metal in wastewater released from a disussed mine.