• 대한토목학회논문집
• /
• 제39권2호
• /
• pp.247-256
• /
• 2019

본 연구에서는 홍수모델링을 위해 삼각격자와 사각격자를 포함하는 혼합격자의 적용이 가능한 2차원 Godunov형 유한체적모형을 이용하여 격자형상과 해상도에 따른 홍수위, 홍수범람범위, 모형의 계산시간을 비교 분석하였다. 연구유역은 2000년 10월 29일부터 11월 19일까지 22일 동안 홍수가 발생한 영국의 Upton-upon Severn 유역이다. 홍수 모델링을 위해 고해상도 LiDAR (Light Detection And Ranging)를 이용하여 지형자료를 구축하였으며, 격자유형 및 해상도에 따른 2차원 홍수모델링 결과는 홍수기간 동안 촬영된 4개의 ASAR (Airborne Synthetic Aperture Radar) 영상자료와 비교하였다. 본 연구는 동일한 지형과 경계조건을 사용하더라도, 격자의 형상과 해상도에 따라 홍수위와 범람범위가 큰 차이를 가질 수 있음을 보여주었으며, 2차원 홍수모델링의 목적과 상황에 맞는 적절한 격자유형과 해상도의 선택이 필요함을 보여준다.

• 한국환경과학회지
• /
• 제4권2호
• /
• pp.159-168
• /
• 1995

To predict reasonably the movement and the concentration of the pollutants in the coastal area. A simulation model should be prepared considering detail topography with land-sea and the urban effects, and the resolution near the source. The explicit method can not be applied due to the instability of the numerical calculation in high horizontal-grid resolution, while the ADI scheme satisfied with the high horizontal grid resolution and can be used in the fine mesh system which shows the detail topography, atmospheric flow The ADI method which studied the high horizontal grid resolution was excellent. The two dimensional model used in the study using ADI method is proved as a reasonable model to predict the wind field in any small scale area including mountainous coastal urban area.

• ETRI Journal
• /
• 제44권1호
• /
• pp.85-93
• /
• 2022

We propose an efficient method for synthesizing mesh-based realistic computer-generated hologram (CGH). In a previous nonanalytic mesh-based CGH synthesis, the angular spectrum of the two-dimensional (2D) plane is calculated using the fast Fourier transform (FFT) with the same size as the resolution of the final hologram. Because FFT increases the computation time as the size of the input matrix increases, the previous method has a problem: The higher the resolution of the hologram, the greater the computational load, thereby delaying synthesis time. In this study, when calculating the angular spectrum of the 2D plane in mesh-based CGH synthesis, we propose a method to calculate the angular spectrum by defining the 2D plane with an arbitrary size smaller than the resolution of the final hologram. The resolution adjustment method reduces the computation time and can be applied to occlusion culling and texturing for the realistic effect of mesh-based CGH. We describe the principle, error analysis, application of realistic effect, and experimental results of the proposed method.

• 전자공학회논문지S
• /
• 제34S권3호
• /
• pp.63-73
• /
• 1997

For the practical applications of the EIT technology, it is essential to reconstruct sttic images iwth a higher spatial resolution in a reasonalble amount of processing time. Using the conventional EIT static image reconstruction algorithms, however, the processing time increases exponential with poor convergence characteristics as we try to get a higher spatial resolution. In order to overcome this problem, we developed a recursive mesh grouping method based on the Fuzzy-GA like algorithm. Computational simulation using the well-known improve dewton-raphson method with the proposed recursive mesh grouping algorithm shows a promising result that we can significantly reduce the processing time in the reconstruction of EIT static images of a higher spatial resolution.

• 충청수학회지
• /
• 제25권3호
• /
• pp.563-577
• /
• 2012

This paper presents a moving mesh method for solving the hyperbolic conservation laws. Moving mesh method consists of two independent parts: PDE evolution and mesh- redistribution. We compute numerical solution of shallow water equation by using moving mesh methods. In comparison with computations on a fixed grid, the moving mesh method appears more accurate resolution of discontinuities.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.121-130
• /
• 2002

The concept of Level Of Detail (LOD) was introduced and has been used to enhance display performance and to carry out certain engineering analysis effectively. We would like to use an adequate complexity level for each geometric model depending on specific engineering needs and purposes. Solid modeling systems are widely used in industry, and are applied to advanced applications such as virtual assembly. In addition, as the demand to share these engineering tasks through networks is emerging, the problem of building a solid model of an appropriate resolution to a given application becomes a matter of great necessity. However, current researches are mostly focused on triangular mesh models and various operators to reduce the number of triangles. So we are working on the multi-resolution of the solid model itself, rather than that of the triangular mesh model. In this paper, we propose multi-resolution representation of B-rep model by reordering and converting design features into an enclosing volume and subtractive features.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.19-22
• /
• 1998

Automatic mesh generation procedures applied to industrial now problems lead to complex mesh topologies where usually no special considerations to mesh resolution are taken. In the present study a fast and flexible solution algorithm in combination with generalized higher order discretization schemes is presented and its application to intake port calculation is demonstrated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.474-477
• /
• 2000

This paper presents an algorithm for simplification of 3D triangular mesh data, based on mesh simplification. The proposed algorithm is first attempt to segment the entire mesh into several parts using the orientation of triangles. Then simplification algorithm is applied to each segment that has similar geometric property. The proposed two step multi-resolution modeling scheme would yield better performance then conventional algorithm like edge collapse technique, since the segmentation step can give global information on the input shape. The experimental results show that the proposed algorithm is performed efficiently.

• 방송공학회논문지
• /
• 제28권3호
• /
• pp.314-328
• /
• 2023

본 논문에서는 동적 메쉬 부/복호화 시 스케일러빌리티 기능을 지원하기 위해 SHVC의 계층적 부호화 방식을 기반으로 텍스처 맵을 압축하는 방법을 제안한다. 제안하는 방법은 고해상도 텍스처 맵을 다운샘플링하여 다해상도의 텍스처 맵을 생성하고 이를 SHVC로 부호화함으로써 효과적으로 다해상도 텍스처 맵들의 중복성을 제거한다. 동적 메쉬 복호화기에서는 수신기 성능, 네트워크 환경 등에 따라 적합한 해상도의 텍스처 맵을 복호화하여 메쉬 데이터의 스케일러빌리티를 지원할 수 있도록 한다. 제안하는 방법의 성능을 검증하기 위해 V-DMC (Video-based Dynamic Mesh Coding) 참조 소프트웨어인 TMMv1.0에 제안하는 방법을 적용하고 본 논문에서 제안하는 스케일러블 부/복호화기와 TMMv1.0 기반의 시뮬캐스트 방식의 성능을 비교하였다. 제안하는 방법은 시뮬캐스트 방법 대비 AI, LD 환경에서 Luma BD-rate (Luma PSNR)가 각각 평균 -7.7%, -5.7%의 향상된 결과를 얻어 제안하는 방법을 통해 효과적으로 동적 메쉬 데이터의 텍스처 맵 스케일러빌리티 지원이 가능함을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.70-73
• /
• 2006

Mesh generation for the region of interest is prerequisite for numerical analysis of governing partial differential equations describing phenomena with proper physic. Mesh generation is, however, usually considered as a major obstacle for a routine application of numerical approaches in Engineering applications. Therefore automatic mesh generation is highly pursued. In this paper automated quadrilateral surface mesh generation is proposed. According to the present method, Cartesian cells of proper resolution for a region bounding the whole region of interest are first generated and the interior cells are identified. Then projecting their surface meshes onto the boundary surfaces gives surface mesh consisting of quadrilateral cells. This method has been implemented as an application program, and example cases are given.