• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.231-238
• /
• 1993

A rules of fuzzy control is to represent an expert‘s and engineer‘s ambiguous control knowledge of system with some lingustic rules. This rule is very difficult to represent perfectly because expert‘s knowledge is not precise and the rule is not perfect. We propose the fuzzy reasoning and learning to upgrade precision of imperfect rules successively after system running. In the proposed method, the precision of the backward part of a fuzzy rule is improved by back propagation learning method. Also, the method reasons the compatibility degree of the forward part of fuzzy rule by associative memory method. This method this is successfully applied to design auto-parking fuzzy controller in which expert‘s technology and knowledge are required in the limited area.

• Composites Research
• /
• v.28 no.2
• /
• pp.52-57
• /
• 2015

Soft morphing robotics making use of smart material and based on biomimetic principles are capable of continuous locomotion in harmony with its environment. Since these robots do not use traditional mechanical components, they can be built to be light weight and capable of a diverse range of locomotion. This paper illustrates a flexible smart phone robot made of smart soft composite (SSC) with inchworm-like locomotion capable of two-way linear motion. Since rigid components are embedded within the robot, bending actuators with embedded rigid segments were investigated in order to obtain the maximum bending curvature. To verify the results, a simple mechanical model of this actuator was built and compared with experimental data. After that, the flexible robot was implemented as part of a smart phone robot where the rigid components of the phone were embedded within the matrix. Then, experiments were conducted to test the smart phone robot actuation force under different deflections to verify its load carrying capability. After that, the communication between the smart phone and robot controller was implemented and a corresponding phone application was developed. The locomotion of the smart phone robot actuated through an independent controller was also tested.

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1247-1258
• /
• 1999

This paper presents vibration control of a CD-ROM(compact disc-read only memory) drive feeding system consisting of a new type of CD-ROM mount using an electro-rheologocal(ER) fluid. Chemically treated starch particles and silicon oil are used for EF fluid, and its field-dependent yield stresses are experimentally distilled under both the shear and the flow modes. On the basis of the yield stress, an appropriate size of ER CD-ROM mount adapted to conventional feeding system is designed and manufactured. Vibration isolation performance of the proposed mount is evaluated in the frequency domain and compared with that of conventional rubber mount. The ER CD-ROM mount is then installed to the drive feeding system and the system equation of motion is derived. The skyhook controller is then incorporated with the fuzzy technique to improve the performance of ER CD-ROM mount. A set of fuzzy parameters and control rules are obtained from a relation between vertical displacement and pitching motion of the feedng system. Followingthe formulation of the fuzzy-skyhook controller, computer simulation is undertaken in order to evaluate vibration suppression of the CD-ROM drive feeding system subjected to various excitations.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.125-139
• /
• 1989

As an adaptive control function generator, the CMAC (Cerebellar Model Arithmetic or Articulated Controller) based learning control has drawn a great attention to realize a rather robust real-time manipulator control under the various uncertainties. There remain, however, inherent problems to be solved in the CMAC application to robot motion control or perception of sensory information. To apply the CMAC to the various unmodeled or modeled systems more efficiently, it is necessary to analyze the effects of the CMAC control parameters on the trained net. Although the CMAC control parameters such as size of the quantizing block, learning gain, input offset, and ranges of input variables play a key role in the learning performance and system memory requirement, these have not been fully investigated yet. These parameters should be determined, of course, considering the shape of the desired function to be trained and learning algorithms applied. In this paper, the interrelation of these parameters with learning performance is investigated under the basic learning schemes presented by authors. Since an analytic approach only seems to be very difficult and even impossible for this purpose, various simulations have been performed with pre specified functions and their results were analyzed. A general step following design guide was set up according to the various simulation results.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.11-19
• /
• 2018

This study suggests a model of production information system that can reduce manufacturing lead time and uniformize quality by using DNC S/W as a part of constructing production information management system in the industrial field of the existing marine engine block manufacturing companies. Under the effect of development of this system, the NC machine interface device can be installed in the control computer to obtain the quality information of the workpiece in real time so that the time to inspect the process quality and verify the product defect information can be reduced by more than 70%. In addition, the reliability of quality information has been improved and the external credibility has been improved. It took 30 minutes for operator to obtain, analyze and manage the quality information when the existing USB memory is used, but the communication between the NC controller computer and the NC controller in real time was completed to analyze the workpiece within 10 seconds.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.1-7
• /
• 2014

The purpose of study is to investigate the current user interface level of air traffic control system with the usability analysis and satisfaction survey questionnaire on user satisfaction. Think aloud protocol is used to identify not only task analysis, but also the level of user-friendliness of the FIMS and ASDE system, and the user interface questionnaires was conducted by QUIS. We collected data from 6 controllers for Think aloud protocol and 15 controllers for QUIS in Incheon airport. The results showed that the system was the valuable tool for ensuring human performance with the support of memory and the facilitation of decision-making tasks. It helps air traffic controllers perform better and minimize errors in a congested time. The human-computer interface system design, however, was not applied, which led to the increase of workload. Air traffic controller participation in software development provided excellent examples for applications in terms of software in FIMS. Based on these results, the study provided that the usability of system interface was necessary to take into account human factors. The development and design of system was discussed in User Interface environment.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.38-46
• /
• 2002

In this paper, we present an adaptive contrast controller for improving the Quality of motion-picture in the video signals on the display. Using a median of image signals, we can improve the contrast according to the middle brightness, adaptively. In addition, the proposed method is useful for real-time image processing and can be composed of simpler hardware structure than other conventional methods because it does not require field and frame memory for computed data. The proposed method can be applied for video signals as well as the still image, while existing methods are confined to only the static image Also, we designed the algorithm through the VHDL, and implemented it through the FPGA. From the testing results, we see that the proposed method can effectively improve the image contrast.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.4
• /
• pp.187-194
• /
• 2008

This paper proposes an effective countermeasure to an intrinsic hardware vulnerability of the keyboard controller that causes sniffing problem on the password authentication system based on the keyboard input string. Through the vulnerability, some possible attacker is able to snoop whole the password string input from the keyboard even when any of the existing keyboard protection software is running. However, it will be impossible for attackers to gather the exact password strings if the proposed policy is applied to the authentication system though they can sniff the keyboard hardware protocol. It is expected that people can use secure Internet commerce after implementing and applying the proposed policy to the real environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1104-1114
• /
• 2000

If the control system that works important job fails, economical loss occurred. Hence, to guarantee high reliability, it must be duplicated. In the case of traditional duplication mechanism, dedicated operating system with duplication functions were built. This required much development and maintenance cost. They can be saved, if we use commercial operating system and its development environment.This paper proposes a duplication mechanism for the system based on commercial 0S. The system that explained in this paper is BSC(Base Station Controller). The duplicated BSC system uses concurrent write memory for synchronization and VxWorks as an operating system. We propose how the task supporting duplication functions is executed without delay and preemption, how to synchronize standby's memory with active' s, and how to use concurrent-write memory easily with VxWorks' s partition. We also describe the takeover procedure when the active detects its hardware fault and when the standby recognizes the failure of the active.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.1-13
• /
• 2011

It has been shown in the literature that active adjustment of the intake area of a jet engine has potential to improve its fuel efficiency. This paper presents the design and control of a novel proof-of-concept active jet engine intake using Nickel-Titanium (Ni-Ti or Nitinol) shape memory alloy (SMA) wire actuators. The Nitinol SMA material is used in this research due to its advantages of high power-to-weight ratio and electrical resistive actuation. The Nitinol SMA material can be fabricated into a variety of shapes, such as strips, foils, rods and wires. In this paper, SMA wires are used due to its ability to generate a large strain: up to 6% for repeated operations. The proposed proof-of-concept engine intake employs overlapping leaves in a concentric configuration. Each leaf is mounted on a supporting bar than can rotate. The supporting bars are actuated by an SMA wire actuator in a ring configuration. Electrical resistive heating is used to actuate the SMA wire actuator and rotate the supporting bars. To enable feedback control, a laser range sensor is used to detect the movement of a leaf and therefore the radius of the intake area. Due to the hysteresis, an inherent nonlinear phenomenon associated with SMAs, a nonlinear robust controller is used to control the SMA actuators. The control design uses the sliding-mode approach and can compensate the nonlinearities associated with the SMA actuator. A proof-of-concept model is fabricated and its feedback control experiments show that the intake area can be precisely controlled using the SMA wire actuator and has the ability to reduce the area up to 25%. The experiments demonstrate the feasibility of engine intake area control using an SMA wire actuator under the proposed design.