Journal of the Korea Safety Management & Science (대한안전경영과학회지)

Korea Safety Management & Science (대한안전경영과학회)
권호 표지
DOI QR코드

DOI QR Code

A Real-Time Monitoring System Model for Reducing Manufacturing Lead-Time in Numerical Control Process - Focusing on the Marine Engine Block Process -

제조 리드타임 단축을 위한 NC 가공공정에서의 실시간 모니터링 시스템 모형 - 선박용 엔진블록 가공공정을 중심으로 -

  • 공명달 (영산대학교 의료경영학과)
  • Received : 2018.08.28
  • Accepted : 2018.09.27
  • Published : 2018.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study suggests a model of production information system that can reduce manufacturing lead time and uniformize quality by using DNC S/W as a part of constructing production information management system in the industrial field of the existing marine engine block manufacturing companies. Under the effect of development of this system, the NC machine interface device can be installed in the control computer to obtain the quality information of the workpiece in real time so that the time to inspect the process quality and verify the product defect information can be reduced by more than 70%. In addition, the reliability of quality information has been improved and the external credibility has been improved. It took 30 minutes for operator to obtain, analyze and manage the quality information when the existing USB memory is used, but the communication between the NC controller computer and the NC controller in real time was completed to analyze the workpiece within 10 seconds.

Keywords

References

  1. Dictionary of Common Sense(2018), pmg Knowledge EngineResearch Institute, Park Moon Gak.
  2. Sung-Ho Nam et al(2008),Development of Flexible CNC Monitoring System for Machining, Korean Society for Precision Engineering, Autumn Conference, Vol. 2008, No. 11, pp. 17-18.
  3. Cheol-Soo Lee et al(2014), On Machine CNC MonitoringSystem, Korean Society for Precision Engineering, Autumn Conference, Vol. 2014, No. 10, p. 799.
  4. J. S. Yoon, Y. J. Choi(2014),Development of CNC DataInterface for Machining ProcessMonitoring, Korean Society for Precision Engineering, Spring Conference, Vol. 2014, No. 10, p. 494.
  5. Sung-Ho Nam et al(2013), AnOn-Line System Architecturefor Remote Energy Monitoring of CNC Machine Tools , Korean Society for Precision Engineering, Vol. 30, No. 5, pp. 480-485. https://doi.org/10.7736/KSPE.2013.30.5.480
  6. Jae-Won Lee(2003), Developmentof PC Camera-Based MonitoringSystem for NC Milling, KAIST, Master's Thesis.
  7. Gwang-Ryeol Park et al(2004), ADevelopment of Prototype System for Monitoring and Checking theSafety-Status of NC Machines, IEInterfaces, Vol. 17, No. 1, pp. 13-21
  8. B. Park, C. Lee(2017), A Study on Tool Monitoring System of Machining Center, Korean Society for Precision Engineering, AutumnConference, Vol. 2017, No. 12, p.892.
  9. Je-Phil Lee(2001), Real-Time Algorithm of a Look-AheadInterpolation and a NURBS Interpolation for High Speed andHigh Precision Machining Based onan Open Architecture CNCController, Chonnam National University, Doctoral Thesis.
  10. Twana Jaff and Atanas Ivanov(2015), Manufacturing Lead-Time Reduction and Knowledge Sharing in the ManufacturingSector, The Journal of Innovation Impact, Paper sdm15-068, pp. 618-629.
  11. Pius J. Egbelu(1991), Reduction of Manufacturing Lead-Time through Selection ofMachining Rate and UnitHandling Size, Procedia CIRP, Volume 21, Issue 1,pp. 21-34.
  12. Vinod Raj S N, Dr. M. Rajesh(2017), Lead Time Reduction in Manufacturing Process of CNCMachines by Lean Principles, International Research Journal ofEngineering and Technology(IRJET), e-ISSN: 2395-0056Volume: 04 Issue: 06, p-ISSN: 2395-0072,pp. 1297-1301 .
  13. Twana Abdlkader HusainJaff(2016), An Analytical Investigation into Lead-Time Reduction in the Manufacturing Sector: A Study of DiscreteManufacturing in Kurdistan Region of Iraq, Brunel University, DoctoralThesis.
  14. Marco Peronaet al(2016),Manufacturing Lead Time Shortening and Stabilisation by Means of Workload Control: An Action Research and a NewMethod, Journal of ProductionPlanning & Control, TheManagement of Operations, Volume 27, Issue 7-8, pp. 660-670.
  15. Olivier Malek et al(2016), LeadTime Reduction by High Precision 5-Axis Milling of a PrototypeGear, Procedia CIRP, Volume 46, pp. 440-443. https://doi.org/10.1016/j.procir.2016.04.051