• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.727-730
• /
• 2002

Chalcogenide glassy semiconductors(CGS) can be obtained by the melt quenching technique. We have investigated the thin film heterostructures : metal-chalcogenide glassy semiconductors, where metal is copper, and chalcogenide glassy semiconductors are glasses of the system As-Se. Cu/CGS film heterostructure were produced in the vacuum evaporator by the method of vacuum thermal evaporation. Doped films are very sensitive to external actions, and this property allows developing supersensitive precision sensors of temperature, humidity, illumination, and etc. based on them. Cu/CGS film has shown that resistance strongly depend on the temperature. The slop of temperature and resistance shows linear.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Journal of Magnetics
• /
• 제2권1호
• /
• pp.1-6
• /
• 1997

The magnetic and magnetostrictive properties of melt-spun ribbons of the alloys (R0.33Fe0.67)1-xBx (R=Tb0.3Dy0.7 and 0$\leq$x$\leq$0.06) are ivestigated as a function of wheel speed during melt-quenching. The saturation magnetiation of the alloys with a crystalline phase ranges from 70 to 80 emu/g and does not vary substantially with the B content. The saturation magnetization of an amorphous phase, which is formed at the condition of thigh wheel speed and high B content, is reduced significantly, however. The coercive force is minimum at x= 0.02 and increases monotonously with the further increase of B content when the microstructure mainly consists of a crystalline phase, but again it is reduced significantly by the formation of an amorphous phase. The low field sensitivity of magnetostriction with magnetic field is found to be good for the alloys with x$\leq$0.04 over a wide range of wheel speed. This magnetostrictive behavior is in contrast with that observed previously for Dy-Fe and Tb-Fe based alloys and is thought to be due to low intrinsic magnetocrystalline anisotropy of the compound.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2842-2849
• /
• 2024

The amorphous glasses containing PbO, ZnO, MgO, and B₂O₃ have been fabricated using the melt quenching technique. The structural properties have been analysed using the Fourier-transform infrared (FTIR) and Raman spectroscopy. Derivative of Absorption Spectra Fitting (DASF) method have been used to estimate the band gap energy from the UV-Vis absorption data which decreases from 3.02 eV to 2.66 eV with increasing the concentration of the PbO.The four glass samples 0.284 and 0.826 MeV showed unique variations in terms of gamma attenuation ability. LZMB4 glass sample proved to be the mist effective in terms of shielding of gamma radiation as it requires little distance compared to LZMB3, LZMB2 and LZMB1 to attenuate. RPE revealed a raise with increase in the thickness of the material and reduces as the energy raises. TF is superior in LZMB1 compared to LZMB2, LZMB3 and LZMB4, confirming that, LZMB4 will attenuate better. The Z_Eff of the materials was seen falling as the energy increases, confirming that the linear attenuation coefficient of the glass materials decreases when the energy is increased. The results confirmed that, glass material LZMB4 is the best option especially for gamma radiation shielding applications compared to LZMB3, followed by LZMB2, then LZMB1.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.175-184
• /
• 1993

Nd-Fe-B계에 Co와 Al을 첨가한 자석합금을 진공유도용해로에서 제조하여 이들 합금을 단롤법으로 melt-spun시켜 급냉리본을 얻었다. 제작된 급냉리본의 냉각속도에 따른 자기적 성질의 변화를 조사하였고, 최적의 급냉속도에서 제작된 리본을 파쇄하여 resin bond 자석을 제조하였으며, 이들 급냉리본 및 bond자석의 자기적 성질, 미세구조, 결정구조에 관하여 연구, 조사하였다. 이들 급냉리본의 자기적 성질은 급냉속도에 따라 크게 변하였으며 20m/sec전후에서 최적의 자기적 성질을 보였다. 이때의 급냉리본의 미세조직은 Nd-rich의 입계상이 미세한 N$d_2$F$e_14$B결정립을 둘러싼 cell 형의 구조였으며, 특히 Al이 2.1at%첨가된 리본시료에서는 iHc=15.5KOe, Br=7.8KG, (BH)max=8.5MGOe의 자기적 성질을 나타내었다. 최적의 급냉속도에서 제작된 리본을 polyamide resin과 2.5wt%의 비율로 혼합하여 상온에서 성형, 결합시켜 제작한 bond자석에서 보다 현저히 향상되었으며 유지시간이 8분인 경우 iHc=10.8KOe, Br=7.3KG, (BH)max=8.0MGOe의 값을 가졌다. 한편, 자구구조는 maze pattern이 주로 관찰되어 자화용이축인 C축이 배열되었으며 bond자석에서보다 hot-press 자석에서 자구폭이 보다 작았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.57-62
• /
• 2001

Korea Atomic Energy Research Institute (KAERI) launched an intermediate scale steam explosion experiment named Test for Real cOrium Interaction with water (TROI) using reactor material to investigate whether the corium would lead to energetic steam explosion when interacted with cold water at low pressure. The melt-water interaction is confined in a pressure vessel with the multi-dimensional fuel and water pool geometry. The cold crucible technology, where the mixture of powder in a water-cooled cage is heated by high frequency induction, is employed. In this paper, results of the first series of tests ($TROI-1{\sim}5$) were discussed. The ZrO2 jets with 5kg mass and 5cm diameter were poured into the 67cm deep water pool at $30{\sim}95^{\circ}C$. Either spontaneous steam explosions or quenching was observed. The morphology of debris and pressure wave profiles clearly indicates the each case.

• 한국자기학회지
• /
• 제2권3호
• /
• pp.233-238
• /
• 1992

유도용해법으로 $Nd_{14}Fe_{76}Co_4B_6$합금 및 $Nd_{10.5}Fe_{79}Co_2Zr_{1.5}B_7$합금의 급냉리본을 제조하고, 냉각속도와 급냉중 외부자장력이 결정이방성과 자기특성에 미치는 영향을 조사하였다. 토크자력계로 측정한 두 합금의 결정자기 이방성은 냉각속도가 증가함에 따라 급격히 감소하였다. 가장 우수한 자기 특성은 두 합금 모두 냉각속도 $V_s$=11 m/s에서 얻어졌으며, 자장중 급냉한 합금의 결정자기이방성 상수가 자장없이 급냉한 합금보다 30~40 % 높게 측정되었다. 외부 자장하에서 급냉된 $Nd_{10.5}Fe_{79}Co_2Zr_{1.5}B_7$합금은 냉각속도 $V_s$=11 m/s에서 $B_r$=8.82 kG, $_iH_c$=9.85 kOe 및 $(B{\cdot}H)_{max}$=16.4 MGOe의 우수한 자기특성을 보인다.

• 한국결정성장학회지
• /
• 제4권4호
• /
• pp.336-346
• /
• 1994

용융 silicon과 carbon 입자가 어떠한 반응관계를 나타내는가를 알아보기 위하여 sili-con만으로 된 powder와 silicon에 carbon을 0.2wt%의 비율로 혼합한 powder와 silicon에 carbon을 0.2wt%의 비율로 혼합한 powder를 silicon의 용융점 이사의 고온인 $1450^{\circ}C, 1550^{\circ}C, 1650^{\circ}C, 1700^{\circ}C$에서 각각 1시간, 4시간을 유지시킨 다음 quenching시켜 각각의 조건에 따른 반응의 정도 및 상의 분포와 morphology의 분석을 통해 melt sili-con의 morphology 변화,carbon이 함유된 silicon의 조건에 따른 물성변화 및 SiC의 형성여부를 조사하기 위하여 광학현미경과 SEM, XRD등을 이용하여 시편의 미세구조 및 결정화 양상을 관찰하였다. 용융점 이상의 온도에서 quartz는 연화하여 분해반응을 일으켜 산소를 내놓고 이것이 silicon과 결합하여 SiO로써 기체상태로 휘발하게 되어 silicon melt에 산소침투로 인항 표면결함을 형성하며, liquid silicon속에 용융되어 있던 carbonrhk 불순물로써 grain boundary를 따라 존재 하고 있는 미반응의 carbon이 용융상태 silicon과 반응하여 SiC를 형성한다. SiC 결정은 고화계 면에서 발생하게 되며 생성되는 결정은 ${\alpha}-SiC$이었다.

• 한국자기학회지
• /
• 제1권1호
• /
• pp.25-29
• /
• 1991

단롤법 급냉응고장치를 이용하여 디스크 표면속도 40m/s로 Sm-Fe-Ti 리본시편을 제작하하고 이의 결정구조 및 자기특성을 조사하였다. 급낸응고상태에서 $Sm_{x}Fe_{100-x-y}Ti_{y}(3.8{\leq}x{\leq}11.5,\;3.8{\leq}y{\leq}19.2)$ 합금은 전 조성에 걸쳐 $TbCu_{7}-type$ 구조의 준안정상이 형성되고 조성에 따라 ${\alpha}-(Fe,\;Ti),\;Fe_{2}Ti$. 비정질 및 $d=2.14{\AA}$에 강한 회절선을 나타내는 미지의 상 등이 존재함을 알 수 있었다. 한편, 급냉응고에 의하여 생성된 이들 $TbCu_{7}-type$ 구조의 준안정상은 $850^{\circ}C$에서 45분간 열처리한 후에도 완전하게 안전상으로 변태되지 않았으나 $SmFe_{11}Ti$ 조성에서는 거의 완전한 변태가 이루어짐을 알 수 있었다. 최적조건($850^{\circ}C{\times}45분$)으로 열처리한 $SmFe_{11}Ti$ 급냉응고리본은 주상인 $ThMn_{12}$ 구조의 경자성상과 연자성상인 $\alpha$-(Fe, Ti) 및 반강자성 $Fe_{2}Ti$ 등으로 구성되어 있었으며, $\alpha$-(Fe, Ti) 및 $Fe_{2}Ti$의 생성은 열처리시 Sm 원자의 증발에 기인한 것으로 판명되었다. 최적조건으로 열처리한 $SmFe_{11}Ti$ 급냉응고리본의 표면 및 내부 조성에 대한 원자비율은 각각 $SmFe_{25.8}Ti_{2.6}$ 및 $SmFe_{11.7}Ti_{1.0}$이었으며, $\alpha$-(Fe, Ti) 및 $Fe_{2}Ti$의 대부분은 리본의 표면층에 존재하는 것으로 관찰되었다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.223-226
• /
• 2008

$Ge_1Se_1Te_2$ chalcogenide amorphous materials was prepared by the conventional melt-quenching method. Samples were processed bye-beam evaporator systems and RF-sputtering systems. Phase change characteristics were analyzed by measuring glassification temperature, crystallization temperature and density of bulk material. The thermal characteristics were measured at the temperature between 300 K and 700 K, and the electrical characteristics were studied within the range from 0 V to 3 V. The obtained results agree with the electrothermal model for Phase-Change Random Access Memory.