• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.1-6
• /
• 2012

Unlike the past, modern urban intersections have dramatic growth in size and utilizations. As a result, continual traffic signal control is essential. Hence the individual or regional electrical blackout may bring about uncontrollable traffic congestion. Late summer of 2011 a regional blackout brought about traffic nightmare not including time and revenue loss associated with this disaster. Due to this disaster our national police agency and other government agencies are in process of introducing an UPS (uninterruptible power supply) system into essential intersections. This study estimates the power consumption necessary to sustain at least 2 continuous hours for a standard four-legged intersection. Prototype was studied using these standards. The field experiment of prototype showed positive results and was able to meet standard guidelines set forth. Prototype tested was able to meet standards in medium to large capacity of traffic size.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.437-444
• /
• 2015

In this age of digital technology, we often experience overwhelming and inescapable feelings of weakness, vulnerability, loneliness and fear that propel us into a state of gloom or frustration. Poetry can also serve as a therapeutic medium for overcoming them because it provides unique opportunities for self-discovery and is a catalyst for healing and self-integration. This study examines the healing properties in English poetry. First, Poetry has expressed innermost feelings, which can serve as a catharsis the emotional release. Therefore it can nurture and strengthen the human capacity. Poetic language heals our soul and mind. Rhythm which comes in many forms and poetic form also are important components of the therapeutic value of poetry. So we can say English poetry can be used as a therapeutic means for healing and personal growth.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.236-242
• /
• 2020

In this paper, we present the improvement in low moisturizing ability and stability that existing skin softeners have due to the low oil content, by developing skin softener using nanoemulsion of phospholipid liposome, based on the properties of nanoemulsion in cosmetic formulation. In this study, two types of oil; dimethicone (DC 200/6cs) or medium chain triglyceride (MCT), and two kinds of lecithin; unsaturated or saturated were respectively applied to produce nanoemulsion. In the particle size analysis of nanoemulsion, the droplet size of nanoemulsion containing DC200/6cs and unsaturated lecithin was the smallest, and all nanoemulsion showed high stability in the measurement of zeta potential. Therefore, with the smallest particle size and high stability, moisture contents and trans epidermal water loss(TEWL) were measured using the skin softener of DC200/6cs and unsaturated lecithin contained nanoemulsion, and the measurement was compared with the non-oil skin softener and the skin softener with only small amount of oil. The results showed that the moisture content of the skin softener using nanoemulsion increased greatly than other two skin softeners, showing high hydration ability and water retention capacity, and TEWL decreased greatly, therefore preventing the evaporation of moisture from the skin. As a result, the oil content and stability of the skin softener was improved by utilizing nanoemulson based of phospholipid liposome, and it is expected to be used in various ways in cosmetic industry.

• Korean Journal of Animal Reproduction
• /
• v.14 no.1
• /
• pp.73-83
• /
• 1990

These studies were carried out to find the proper conditions for in vitro maturation and fertilization of bovine follicular oocytes and culture methods capable of further developing early embryos. For these objectives, the cleavage rate of oocytes matured and fertilized in vitro was investigated under medium supplemented with hormones and estrous cow serum and season of oocytes collection as well as different cumulus cell stage before insemination. Finally, 2~8 cell embryos were cultured in in vitro and in vitro culture system to investigate developmental capacity into morula. 1. Cleavage rate of oocytes matured in vitro was 27%(20/73) for A(LH＋FSH＋estradil-17$\beta$＋10% FBS), 38%(27/71) for B(LH＋10% ECS) and 27%(15/56) for C(10% ECS), respectively. Supplement B showed more higher rate and 4~8 cell embryos were also obtained much more in this group(67%, 18/27). In vitro maturation rate of follicular oocytes cultured in TCM 199 supplemented withLH and 10% ECS was 88%(75/85). 2. Cleavage rate(15%, 10/65) of oocytes collected in summer was significantly lower than in fall(47%, 42/89). 3. Cleavage rate(15%, 10/65) of oocytes collected in summer was significantly lower than in fall(47%, 42/89). 3. Cleavage rate(15%, 10/65) of oocytes with partially removed cumulus cell before insemination was more higher than that(44%, 27/62) of oocytes with intact cumulus cell. 4. The frequency of development from early cleaved embryos into morula was 6%(4/65), 12%(4/33) for co-culture of cumulus cell monolayer and bovine oviduct epithelial cell monolayer, respectively and 25%(6/25) in ligated rabbit oviduct.

• Journal of the Korean Academic Society of Industrial Cluster
• /
• v.1 no.1
• /
• pp.29-46
• /
• 2007

The purpose of this paper is to analyses current status and issues of cluster formation and extract policy implications. To this end, the questionnaire which surveyed the level of cluster formation were executed targeting the actors of regional innovation projects(RIPs). The results show that the situations and development stage of the cluster formation between capital region and non-capital region, large cities and small and medium sized cites are different. The level of clustering is also satisfactory, which is a requirement for cluster formation at its early stage. However, the capacity for phase II of cluster growth is not sufficient yet in terns of relationships between ventures and large corporations, institutions supporting management, finance and marketing, researchers from each individual sector of strategic industries and spin-off fines. Therefore, RIPs should be promoted with different policy tools for various regions that are devised according to the varying development stage of each region. The location of RIPs should be determined considering efficiency rather than equity, clustering rather than decentralization, and specialization rather than multiple development. In the long term, developed regions should pursue balanced regional development, with underdeveloped regions targeting specialization.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.57-66
• /
• 2011

For the lateral load resistance of a RC frame in a medium risk seismic zone, the strength of lower story beams and columns should be larger than those of the upper stories. However, the lateral loads can be accommodated by redistributing design beam moments vertically as well as horizontally so all beams end up with identical strengths. This paper looks at the impact of the vertical redistribution of beam moments to provide identical beam strength over as many floors as possible. Two-bay six-story RC frame was designed with and without vertical beam moment redistribution and its seismic performance were evaluated by using push-over limit analysis and by non-linear time history dynamic analysis. Analytical results show that with the use of vertical beam moment redistribution the increase in the ductility demand is similar to the proportion of moment redistribution applied, but this additional demand is below the ductility capacity of well detailed RC members.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.2
• /
• pp.119-126
• /
• 2008

Since somatic embryogenesis combined with ethylmethane sulfonate(EMS) treatments is the most efficient technique for mutagenesis, the embryogenic capacity of four soybean cultivars was evaluated at different EMS concentrations, treatment times, and preculture durations. Two to 4 mm long immature cotyledons were placed in induction medium after EMS treatment, and the numbers of somatic embryos formed per explant were counted four weeks after culture initiation. We observed genotypic differences in the efficiency of somatic embryogenesis from immature embryos among four cultivars treated with different concentrations of EMS for six hours. Cultivars, Sinpaldalkong 2 and Jack, displayed highly efficient somatic embryogenesis regardless of EMS concentration, whereas very low efficiency or no survival was observed in Jinju 1 and Iksannamulkong cultivars. Preculture duration did not influence the efficiency of somatic embryogenesis. Because Sinpaldalkong 2 exhibited the best somatic embryogenesis, much higher concentrations of EMS were used to test somatic embryo formation under different periods of time in this cultivar. Three and six hour treatments with both 1 and 2 mM EMS yielded higher embryo formation than longer periods of time. Increasing the time with embryos in 2 mM EMS caused a reduction in somatic embryogenesis in Sinpaldalkong 2, but many chlorophyll-deficient soybean variants were identified in the $M_1R_0$ and $M_2R_1$ generations. In addition to Jack, Sinpaldalkong 2 is a good genotype for plant regeneration from EMS-treated immature embryo cultures.

• Archives of design research
• /
• v.17 no.2
• /
• pp.171-180
• /
• 2004

This study aims at investigating the influences exerted by the visual elements of outdoor signboard on consumers' capacity to make judgment on values. Therefore, it intends at studying the values displayed by signboards. As the phase one of the investigation, on-site study has been performed to photograph signboards of the entertainment and amusement business premises in 4 regions of Busan, thus to investigate and analysis the photographed data. For the second phase, survey was peformed on the basis of the analyzed data to select 15 signboards to be used in making judgement of values based on results of frequency measure per each category of geographical region, business type and three grades of the high, medium and low. In the third phase, survey was peformed on the items of value (A-G) to analyze consumer values. Finally, the fourth phase was carried out to compare and analyze the actual values of business premisses against that of the consumers. The result of study displayed that the effect exerted by visual elements of signboards on consumers is not of simple information provision, but is of essential factor to serve as the foundation of added values for business premises.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.434-443
• /
• 2011

A large scale seeding system was stable in terms of techniques but a convenient seeding system of small size was unsettled. This study was performed to develop a semi-automatic seeder for small and medium sized scale farm. To investigate optimum needle diameter and vacuum pressure was used vacuum suction needle seeder. Although the needle diameter according to the kinds of seed was different, the needle diameter for salvia and lettuce seed was suitable for 0.34 mm needle nozzle and 0.4 mm taper nozzle. The prototype consisted a seeding frame attached with needle nozzle, seed hopper, vibrating device, seeding part, vacuum ejector, seed tube etc.. As the result with the experiments, the seeding rate of the seeder was 92% and more at 0.34 mm diameter needle nozzle and 0.4 mm taper nozzle. Eccentric weight for seed hopper vibration was suitable that weight is 11 g and eccentric distance is 0.5 mm. Vibration acceleration of upward direction was 0.363 m/$s^2$. Working capacity of the seeder was possible 160 trays per hour. It was possible for sowing small seeds but it was required to make compact and simple model.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.111-116
• /
• 2015

The soil sample obtained from shooting area contaminated with Pb, Cu, and Zn was investigated to determine the chemical forms of heavy metals with Tessier’s sequential extraction method, which is constituted of five fractions such as ‘exchangeable’, ‘bound to carbonate’, ‘bound to oxide’, ‘bound to organic matter’, and residual fractions. The amount of organic matter was measured by loss on ignition (LOI) and then the results of ‘bound to organic matter’ and LOI were compared. The sequential extraction results show that 4.7%-45% of Pb, 6.2%-25.9% of Cu and 3.9%-15.3% of Zn belong to the ‘bound to organic matter’ fraction, but LOI result shows that only 1.0%-2.8% of organic matter exists in the soil sample. In heavy medium separation tests, because Pb and Cu extracted in ‘bound to organic matter’ and residual fractions were removed, the heavy metals in the fractions would exist as heavier forms. These results suggest that the part of heavy metal extracted in ‘bound to organic matter’ fraction would result from the oxidation of metallic forms by hydrogen peroxide and nitric acid used in the fraction, and, consequently, that the ‘bound to organic matter’ fraction should be investigated in detail to determine the removal method and treatment capacity when the Tessier’s sequential extraction method is used to examine heavy metal contaminants resulted from elemental metal like bullets.