• Title/Summary/Keyword: Medium capacity

Search Result 897, Processing Time 0.028 seconds

양이온교환용량이 다른 제올라이트 처리에 따른 밭토양 내 중금속 안정화 평가 (Application of Zeolite with Different Cation Exchange Capacity for the Stabilization of Heavy Metals in Upland Soil)

  • 구본운;김문주;박성직
    • 한국농공학회논문집
    • /
    • 제59권5호
    • /
    • pp.41-49
    • /
    • 2017
  • This study was aimed to investigate the influence of cation exchange capacity (CEC) and application amounts of zeolite on the stabilization of heavy metals (As, Ni, Pb, and Zn) in upland soils. The upland soils were sampled from field near mines located in Gyeonggi Province. The CEC of zeolite was treated at three different levels, ie, low, medium, and high, while zeolite was amended with soils at the ratio of 0.1 % and 0.5 % as to soil weight. A sequential extraction was performed for the soil sampled at 1, 2 4, and 8 week after zeolite was added to the soil. The concentrations of Pb and Zn appeared to be high in the sampled soils. The mobility of heavy metals obtained from sequential experiments was as follows: Pb > Zn > Ni >As. Addition of zeolite to contaminated soils effectively reduced exchangeable and carbonate fractions but increased organic and residual fraction, indicating that zeolite is effective for immobilizing heavy metals in soils. The influence of incubation time on the metal stabilization was rather pronounced as compared to the application amount and CEC of zeolite.

활성탄의 기공구조에 따른 아세톤 증기와 톨루엔 증기의 흡착 및 탈착특성 비교 (Comparison of Adsorption and Desorption Characteristics of Acetone Vapor and Toluene Vapor on Activated Carbons According to Pore Structure)

  • 이송우;나영수;안창덕;이민규
    • 한국환경과학회지
    • /
    • 제21권10호
    • /
    • pp.1195-1202
    • /
    • 2012
  • The purpose of this work is to study the adsorption and desorption characteristics of acetone vapor and toluene vapor from adsorption tower in the VOCs recovery device. The six kinds of activated carbon with different pore structures were used and the adsorption and desorption characteristics were compared according to pore structure, desorption temperature, and adsorption method, respectively. Adsorption capacity of acetone vapor and toluene vapor by batch method was higher than that by dynamic method. Especially, activated carbon with medium-sized or large pores had more difference in adsorption capacity according to adsorption methods as a result of gradually condensation of vapors on relatively mesopore and large pores. Activated carbons with relatively large pores and relatively small saturated adsorption capacity had excellent desorption ability.

Capacity Analysis of Internet Protocol Television (IPTV) over IEEE 802.11ac Wireless Local Area Networks (WLANs)

  • Virdi, Chander Kant;Shah, Zawar;Levula, Andrew;Ullah, Imdad
    • International Journal of Computer Science & Network Security
    • /
    • 제22권2호
    • /
    • pp.327-333
    • /
    • 2022
  • Internet Protocol Television (IPTV) has emerged as a personal entertainment source for home users. Streaming IPTV content over a wireless medium with good Quality of Service (QoS) can be a challenging task as IPTV content requires more bandwidth and Wireless Local Area Networks (WLANs) are susceptible to packet loss, delay and jitter. This research presents the capacity of IPTV using User Datagram Protocol (UDP) and TCP Friendly Rate Control (TFRC) over IEEE 802.11ac WLANs in good and bad network conditions. Experimental results show that in good network conditions, UDP and TFRC could accommodate a maximum of 78 and 75 Standard Definition Television (SDTV) users, respectively. In contrast, 15 and 11 High-Definition Television (HDTV) users were supported by UDP and TFRC, respectively. Performance of UDP and TFRC was identical in bad network conditions and same number of SDTV and HDTV users were supported by TFRC and UDP. With background Transmission Control Protocol (TCP) traffic, both UDP and TFRC can support nearly the same number of SDTV users. It was found that TFRC can co-exist fairly with TCP by giving more throughput to TCP unlike UDP.

기술혁신역량과 사회적 자본이 비재무성과에 미치는 영향 - 수도권 중소기업을 대상으로 - (The Impact of Technology Innovation Capacity and Social Capital on Non-Financial Performance - For small and medium-sized businesses in the metropolitan area -)

  • 류길호;이선규
    • 융합정보논문지
    • /
    • 제9권11호
    • /
    • pp.92-102
    • /
    • 2019
  • 본 연구는 수도권에 있는 중소기업을 대상으로 기업의 기술혁신역량과 사회적 자본이 기업의 비 재무적 성과에 미치는 영향을 분석하였다. 기술혁신역량은 연구개발역량과 기술축적역량으로 정의하였고, 사회적 자본은 상호작용, 목표공유, 구성원 신뢰로 정의하였다. 표본 자료는 설문조사 방법을 이용하여 방문, 전화 통화, 전자메일, 팩스 등의 방법으로 진행하였다. 분석에 활용된 표본 자료는 223부였다. 분석결과, 기술혁신역량의 연구개발역량과 기술축적역량은 비 재무적 성과에 유의미한 영향을 미치는 변수로 분석되었고, 사회적 자본의 상호작용, 구성원 신뢰 요인도 비 재무적 성과에 유의미한 영향을 미치는 변수로 분석되었으나 목표공유는 비 재무적 성과에 유의미한 영향을 미치지 않는 것으로 검증되었다. 분석 결과를 바탕으로 본 연구에서는 다음과 같은 추론을 할 수 있었다. 첫째, 중소기업들은 기술력이나 자본력이 취약함에도 불구하고 치열한 시장환경에서 살아남기 위하여 끊임없는 기술혁신 활동을 하고 있는 것으로 추론할 수 있었고, 둘째, 중소기업의 구성원들은 상호작용과 구성원들 간의 신뢰를 바탕으로 기업의 성과를 이루고자 많은 노력을 하고 있는 것으로 추론할 수 있었다. 그러나 구성원들은 기업이 추구하는 목표 공유에는 부정적인 측면이 있음을 알 수 있었다.

해외사업 리스크 분석을 통한 중소 조경건설업체의 베트남 진출전략에 관한 연구 (A Study on the Entry Strategies of Small and Medium Sized Landscape Contractors to Vietnam by Risk Analysis in Overseas Projects)

  • 태종욱;정대영;황준;전진형
    • 한국조경학회지
    • /
    • 제46권6호
    • /
    • pp.1-16
    • /
    • 2018
  • 국내 건설경기 침체로 조경건설업체의 수익성이 저하되면서 이를 극복할 수 있는 대안이 요구되고 있으며, 조경분야에서는 해외건설시장 진출을 적극적으로 추진하고 있다. 하지만 중소 조경건설업체들은 해외진출을 위한 내부 역량과 사전 준비가 미흡하여 다양한 리스크에 직면하고 있는 실정이다. 이에 본 연구에서는 성장잠재력이 높은 베트남 건설시장을 대상으로 진출환경 및 리스크 요인을 분석하고, 중소 조경건설업체의 수주경쟁력 향상을 위한 대응방안을 마련하고자 하였다. 본 연구는 해외건설 전문가 6명을 대상으로 심층인터뷰를 수행하였으며, 베트남 진출환경 및 리스크 요인을 도출하고, 이에 대응할 수 있는 진출전략을 제시하였다. 연구결과, 첫째, 베트남은 인프라 및 주택 수요 증가에 따른 조경분야 진출기회가 확대될 것으로 예상되지만, 베트남의 사업 환경의 변화는 중소 조경건설업체의 진출가능성에 변수가 될 것으로 보인다. 둘째, 중소 조경건설업체의 베트남 진출 리스크 요인은 법과 규정, 정부재정상태, 시장변동, 행정체계, 최저임금 상승, 자금조달 및 보증, 계약, 수목 및 자재, 설계오류로 도출하였다. 셋째, 중소 조경건설업체의 베트남 진출전략은 단기 전략과 중장기 전략으로 제시되었다. 본 연구의 결과는 중소 조경건설업체의 베트남 진출을 위한 기초자료로 활용될 수 있으며, 향후 조경분야의 해외진출 활성화에 기여할 수 있다는 점에서 의의가 있다.

SIMAN을 이용한 조립 시스템의 시뮬레이션에 대한 연구 (Simulation of Assembly System using SIMAN)

  • 목학수
    • 대한산업공학회지
    • /
    • 제17권1호
    • /
    • pp.59-73
    • /
    • 1991
  • In this paper, how to evaluate the assembly system was studied. The traction machine(TRM/C) is a kind of medium sized small quantity product. This work was performed on restriction of satisfying the customer's demand by simulating on the criteria of the queuing quantity in production system, the effectiveness of assembly machine and the average time spent on assembling. The problems about assembling were grasped through the analysis of products and process. The outputs of simulations that used SIMAN on four alternatives were evaluated on the basis of the average queuing quantity, the line effectiveness, the assembly time of a product and the production capacity.

  • PDF

Direct Multipropagation through Organogenesis from Nodal Explants of Anoectochilus formosanus Hayata

  • Rha, Eui-Shik;Kim, Hyun-Soon;Yoo, Nam-Hee
    • Plant Resources
    • /
    • 제1권1호
    • /
    • pp.22-25
    • /
    • 1998
  • To establish direct multipropagation through organogenesis from nodal explants of Anoectochilus formosanus Hayata, the nodes were cultured on LS medium containing various concentrations of 6-benzyladenine(BA). High plant regeneration and adventitious bud formation were obtained from supplemented with 4.0mg/l of BA. Plant height was promoted by adding 0.3% activated charcoal. Plantlet regeneration capacity from nodes was depended on nodal parts on the stem, upper position was the best comparing with intermediate and lower.

  • PDF

DSP를 이용한 자동고장구분개폐기의 제어장치 개발 (The Development of ASS Controller Using DSP)

  • 우천희;한태환
    • 전기학회논문지P
    • /
    • 제53권3호
    • /
    • pp.142-147
    • /
    • 2004
  • In this study, We developed the microprocessor based controller for Auto Section Switch(ASS). This is installed at consumer's medium-high voltage(load capacity is below 4,000 kVA) switchgear. This function is cooperate with protection device of fault section and automatically dividing the section. And It is designed by Air putter type extinction structure and adopt the mechanism and breaking part module of existing Load Breaker Switch. In addition, We successfully conducted the operation test and checked main function of proto-type.

IGM에 근입된 말뚝의 지지력 해석을 위한 기준침하량 결정방법 제안 (The Analysis of Shaft Deformation for Evaluating the Bearing Capacity of IGM Sosketed Drilled Shaft)

  • 천병식;김원철;서덕동
    • 한국지반환경공학회 논문집
    • /
    • 제5권3호
    • /
    • pp.17-30
    • /
    • 2004
  • 본 연구에서는 현장타설말뚝의 지지력에 관한 기존 및 IGM 이론의 적용성을 비교 평가하고, 변위를 고려한 지지력의 결정을 위해 IGM 상단부에서의 기준침하량 결정식을 제안하였다. 제안식은 말뚝의 두부침하량, IGM 상부 토층의 하중전이특성 및 말뚝의 탄성압축 이론에 기초하였다. 특히, 기존 및 IGM 이론의 적용성과 제안식의 적용성을 검증하기 위해 국내외 재하시험 결과를 이용한 분석이 실시되었다. 재하시험 결과를 이용하여 분석한 결과 제안식이 활용된 IGM 이론에 의해 향후 말뚝 설계시 변위를 고려한 지지력의 해석이 가능할 것으로 판단되었다. 특히, 제안식에 도입된 침하보정계수 $k_m$은 지반상태나 하중전이 특성을 반영하는 계수로서 하중 및 변형 증가에 따라 변화하는 특징을 보였다.

  • PDF