• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.397-406
• /
• 2014

Radio frequency (RF) jamming is a denial of service attack targeted at wireless networks. In resource-hungry scenarios with constant traffic demand, jamming can create connectivity problems and seriously affect communication. Therefore, the vulnerabilities of wireless networks must be studied. In this study, we investigate a particular type of RF jamming that exploits the semantics of physical (PHY) and medium access control (MAC) layer protocols. This can be extended to any wireless communication network whose protocol characteristics and operating frequencies are known to the attacker. We propose two efficient jamming techniques: A low-data-rate random jamming and a shot-noise based protocol-aware RF jamming. Both techniques use shot-noise pulses to disrupt ongoing transmission ensuring they are energy efficient, and they significantly reduce the detection probability of the jammer. Further, we derived the tight upper bound on the duration and the number of shot-noise pulses for Wi-Fi, GSM, and WiMax networks. The proposed model takes consider the channel access mechanism employed at the MAC layer, data transmission rate, PHY/MAC layer modulation and channel coding schemes. Moreover, we analyze the effect of different packet sizes on the proposed jamming methodologies. The proposed jamming attack models have been experimentally evaluated for 802.11b networks on an actual testbed environment by transmitting data packets of varying sizes. The achieved results clearly demonstrate a considerable increase in the overall jamming efficiency of the proposed protocol-aware jammer in terms of packet delivery ratio, energy expenditure and detection probabilities over contemporary jamming methods provided in the literature.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.413-414
• /
• 2012

본 연구는 고속 PLC(PLC: Power Line Communications)를 구현하기 위해, 전력선을 통해서 통신을 하고, 시스템 간의 정보를 교환하는 매체접근제어(MAC) 계층 적합성 인증하기 위한 실험에 관한 연구이다. 연구과정은 물리계층(PHY) 및 매체제어접근계층(MAC) 규격을 바탕으로 하고, 200Mbps의 고속전송이 가능한 PLC 칩(Chip)을 대상으로 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.803-813
• /
• 2005

This paper explores the throughput performance of CSMA/CA-based DCF protocol over frequency-selective, slow Ricean fading channels with both the $E_{b}/N_{o}$ and BER at the MAC layer in the 802.1 la wireless LAN. By exploring the throughput of DCF protocol with the data rate of 6Mbps, 12 Mbps, 24 Mbps and 54 Mbps, we find the fact that the higher the $E_{b}/N_{o}$ be and the less the BER be, the higher the throughput be.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1465-1470
• /
• 2011

In this paper, we propose a new MAC protocol, namely DM-MMAC (Doze Mode Multi-Channel MAC) for ad hoe wireless networks which can utilize multiple channels effectively, thereby enhancing the network throughput considerably. Basically, the IEEE 802.11 specification allows for the use of multiple channels available at the physical layer, but its MAC protocol is designed only for a single channel with the fatal drawback, so called multi-channel hidden terminal problem in multi-channel environments. In this vein, several multi-channel MAC protocols have been proposed, but most of them demonstrate the performance problem that its throughput drastically decreases as the number of mobile hosts residing in a given network increases with small number of available channels. In this work, we tried to improve the performance of multi-channel MAC protocols in terms of network throughput as well as power saving effects by simplifying the channel assignment and channel capturing procedures and reducing the possibility of collisions between mobile hosts.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1305-1313
• /
• 2010

Last few years, wireless personal area network (WPAN) has been widely researched for various healthcare applications. Due to restriction of device hardware (e.g., energy and memory), we need to design a highly-versatile MAC layer protocol for WBAN (Wireless Body Area Network). In addition, when an emergency occurs to a patient, a priority mechanism is necessitated for a urgent message to get through to the final destination. This paper presents a priority mechanism referred to as hybrid priority MAC for WBAN. Through extensive simulation, we show the proposed MAC protocol can minimize the average packet latency for urgent data. Thus, when patients have an emergency situation, our MAC allows adequate assistance time and medical treatment for patients. The simulation based on NS-2 shows that our Hybrid Priority MAC has the good performance and usability.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.421-430
• /
• 2006

In this paper, we propose a practical implementation of network-adaptive HD(high definition) MPEG-2 video streaming with a cross-layered channel monitoring(CLM) over the IEEE 802.11a WLAN(wireless local area network). For wireless channel monitoring, AP(access point) periodically measures the MAC(medium access control) layer transmission information and sends the monitoring information to a streaming server. This makes that the streaming server reacts more quickly as well as efficiently to the fluctuated wireless channel than that of the end-to-end monitoring(E2EM) scheme for the video adaptation. The streaming sewer dynamically performs the priority-based frame dropping to adjust the video sending rate according to the measured wireless channel condition. For this purpose, our streaming system nicely provides frame-based prioritized packetization by using a real-time stream parsing module. Various evaluation results over an IEEE 802.11a WLAM testbed are provided to verify the intended QoS adaptation capability The experimental results show that the proposed system can effectively mitigate the quality degradation of video streaming caused by the fluctuations of time-varying wireless channel condition.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.292-299
• /
• 2013

In this paper, we developed a data transmission system over coaxial cable based on the IEEE 802.15.3 MAC and Ultra-Wideband(UWB) Physical Layer. This system is capable of operation in both wireless and wired medias. When operating on coax cable it is capable of Gigabit bi-directional data rate operation on in-home coax wiring and over Hybrid-Fiber-Coax(HFC) cable infrastructure. The developed system transceives command, control and data over a 75 ohm coax system in a home or office. This system operates at a center frequency of 4GHz with a total occupied bandwidth of 1.33Ghz centered on 4GHz. The system uses BPSK modulation and sends symbols at a maximum power level of +15dBm. It has been tested and works through up to three CATV RF splitters in a home environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.623-629
• /
• 2012

In this paper, we analysis the performance of position estimation when adopting Dynamic TDMA(DTDMA) in JTIDS RelNav. JTIDS RelNav is widely understood as a new navigation solution possibly capable to support or take cover of the role of conventional systems including INS or GPS no matter if they are working well or not. By maximizing the efficiency of radio resource management in MAC(Medium Access Control) layer we enhance the system performance without any replacement of hardware.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.154-160
• /
• 2014

The address resolution protocol (ARP) provides dynamic mapping between two different forms of addresses: the 32-bit Internet protocol (IP) address of the network layer and the 48-bit medium access control (MAC) address of the data link layer. A host computer finds the MAC address of the default gateway or the other hosts on the same subnet by using ARP and can then send IP packets. However, ARP can be used for network attacks, which are one of the most prevalent types of network attacks today. In this study, a new ARP algorithm that can prevent IP spoofing attacks is proposed. The proposed ARP algorithm is a broadcast ARP reply and an ARP notification. The broadcast ARP reply was used for checking whether the ARP information was forged. The broadcast ARP notification was used for preventing a normal host's ARP table from being poisoned. The proposed algorithm is backward compatible with the current ARP protocol and dynamically prevents any ARP spoofing attacks. In this study, the proposed ARP algorithm was implemented on the Linux operating system; here, we present the test results with respect to the prevention of ARP spoofing attacks.