• 제목/요약/키워드: Medical phantom

검색결과 1,091건 처리시간 0.025초

복부 진단 X선 검사 시 태아 및 임산부의 선량 평가 (Dose Assessment during Pregnancy in Abdominal X-ray Examinations)

  • 우리원;조용인;김정훈
    • 한국방사선학회논문지
    • /
    • 제14권3호
    • /
    • pp.261-270
    • /
    • 2020
  • 진단 방사선 검사에서 임산부와 태아에 대한 선량 평가는 현실적으로 어려우며, 관련된 연구 자료 또한 부족한 실정이다. 이에 본 연구에서는 모의실험을 통해 복부 X선 검사 시 임산부에 대한 선량과 태아선량을 분석하고자 하였다. 본 연구에서는 ICRP 89에서 제시하는 자료를 토대로 기존의 임산부 팬텀을 재구성한 팬텀을 제작 하였으며, 이를 이용하여 임신 주 수에 따른 임산부의 장기선량 및 태아선량에 대한 평가와 기존 팬텀과 재구성된 팬텀의 선량 차이를 분석하였다. 그 결과 복부 X선 검사 시, 입사되는 선원방향에 가까운 장기일수록 높은 선량을 나타내는 경향을 보였다. 또한 후전방향 촬영 시, 전후방향 촬영보다 태아 선량이 약 65%이상 감소하는 것을 확인할 수 있었다.

세기변조방사선치료의 정도관리를 위한 두경부 팬톰 제작에 관한 연구 (The Study on the Head and Neck Phantom for Quality Assurance of Intensity Modulated Radiotherapy)

  • 신동호;박성용;김주영;이세병;조정근;김대용;조관호
    • 한국의학물리학회지:의학물리
    • /
    • 제16권1호
    • /
    • pp.39-46
    • /
    • 2005
  • m3 (BrainLAB Inc., Germany)를 이용한 두경부 IMRT의 정도관리에서 테이블과 갠트리의 위치에 따라 테이블에 의한 선량감쇠가 일어나 정확한 처방 선량을 측정할 수 없다. 이 문제를 해결하기 위해 두경부 종양의 세기변조방사선치료를 위해 Brain Lab사의 환자테이블 mount를 이용해 설치할 수 있는 원통형 두경부 팬톰을 제작하였다. 이를 이용하여 환자테이블에 의한 선량 감쇠를 측정하고 실제 임상에 적용함으로써 테이블에 의한 선량 감쇠로 인한 선량분포의 차이를 확인할 수 있었다. 측정결과 환자테이블에 의한 점 선량의 감쇠가 최대 약 35%가 났으며 실제 환자 치료계획에 대한 정도관리에서의 절대점 선량의 경우 5.4%의 선량차이를 나타냈다.

  • PDF

PET/MR 영상에서의 팬텀을 활용한 노이즈 감소를 위한 변형된 중간값 위너필터의 적용 효율성 연구 (Efficiency of Median Modified Wiener Filter Algorithm for Noise Reduction in PET/MR Images: A Phantom Study)

  • 조영현;이세정;이영진;박찬록
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권3호
    • /
    • pp.225-229
    • /
    • 2021
  • The digital image such as medical X-ray and nuclear medicine field mainly contains noise distribution. The noise degree in image degrades image quality. That is why, the noise reduction algorithm is efficient for medical image field. In this study, we confirmed effectiveness of application for median modified Wiener filter (MMWF) algorithm for noise reduction in PET/MR image compared with median filter image, which is used as conventional noise redcution algorithm. The Jaszczak PET phantom was used by using 18F solution and filled with NaCl+NiSO4 fluids. In addition, the radioactivity ratio between background and six spheres in the phantom is maintained to 1:8. In order to mimic noise distribution in the image, we applied Gaussian noise using MATLAB software. To evlauate image quality, the contrast to noise ratio (CNR) and coefficient of variation (COV) were used. According to the results, compared with noise image and images with MMWF algorithm, the image with MMWF algorithm is increased approximately 33.2% for CNR result, decreased approximately 79.3% for COV result. In conclusion, we proved usefulness of MMWF algorithm in the PET/MR images.

Comparison between Old and New Versions of Electron Monte Carlo (eMC) Dose Calculation

  • Seongmoon Jung;Jaeman Son;Hyeongmin Jin;Seonghee Kang;Jong Min Park;Jung-in Kim;Chang Heon Choi
    • 한국의학물리학회지:의학물리
    • /
    • 제34권2호
    • /
    • pp.15-22
    • /
    • 2023
  • This study compared the dose calculated using the electron Monte Carlo (eMC) dose calculation algorithm employing the old version (eMC V13.7) of the Varian Eclipse treatment-planning system (TPS) and its newer version (eMC V16.1). The eMC V16.1 was configured using the same beam data as the eMC V13.7. Beam data measured using the VitalBeam linear accelerator were implemented. A box-shaped water phantom (30×30×30 cm3) was generated in the TPS. Consequently, the TPS with eMC V13.7 and eMC V16.1 calculated the dose to the water phantom delivered by electron beams of various energies with a field size of 10×10 cm2. The calculations were repeated while changing the dose-smoothing levels and normalization method. Subsequently, the percentage depth dose and lateral profile of the dose distributions acquired by eMC V13.7 and eMC V16.1 were analyzed. In addition, the dose-volume histogram (DVH) differences between the two versions for the heterogeneous phantom with bone and lung inserted were compared. The doses calculated using eMC V16.1 were similar to those calculated using eMC V13.7 for the homogenous phantoms. However, a DVH difference was observed in the heterogeneous phantom, particularly in the bone material. The dose distribution calculated using eMC V16.1 was comparable to that of eMC V13.7 in the case of homogenous phantoms. The version changes resulted in a different DVH for the heterogeneous phantoms. However, further investigations to assess the DVH differences in patients and experimental validations for eMC V16.1, particularly for heterogeneous geometry, are required.

Depth Dose According to Depth during Cone Beam Computed Tomography Acquisition and Dose Assessment in the Orbital Area Using a Three-Dimensional Printer

  • Min Ho Choi;Dong Yeon Lee;Yeong Rok Kang;Hyo Jin Kim
    • Journal of Radiation Protection and Research
    • /
    • 제49권2호
    • /
    • pp.68-77
    • /
    • 2024
  • Background: Cone beam computed tomography (CBCT) is essential for correcting and verifying patient position before radiation therapy. However, it poses additional radiation exposure during CBCT scans. Therefore, this study aimed to evaluate radiological safety for the human body through dose assessment for CBCT. Materials and Methods: For CBCT dose assessment, the depth dose was evaluated using a cheese phantom, and the dose in the orbital area was evaluated using a human body phantom self-fabricated with a three-dimensional printer. Results and Discussion: The evaluation of radiation doses revealed maximum doses of 14.14 mGy and minimum doses of 6.12 mGy for pelvic imaging conditions. For chest imaging conditions, the maximum doses were 4.82 mGy, and the minimum doses were 2.35 mGy. Head imaging conditions showed maximum doses of 1.46 mGy and minimum doses of 0.39 mGy. The eyeball doses using a human body phantom model averaged at 2.11 mGy on the left and 2.19 mGy on the right. The depth dose ranged between 0.39 mGy and 14.14 mGy, depending on the change in depth for each imaging mode, and the average dose in the orbit area using a human body phantom was 2.15 mGy. Conclusion: Based on the experimental results, CBCT did not significantly affect the radiation dose. However, it is important to maintain a minimal radiation dose to optimize radiation protection following the as low as reasonable achievable principle.

PACS에서 JPEG2000을 이용한 AAPM CT Performance Phantom영상의 압축에 따른 화질변화 (Change of Image Quality within Compression of AAPM CT Performance Phantom Image Using JPEG2000 in PACS)

  • 권순무
    • 한국방사선학회논문지
    • /
    • 제6권3호
    • /
    • pp.217-226
    • /
    • 2012
  • 본 연구는 PACS에서 JPEG200을 이용하여 AAPM CT Performance Phantom 영상을 다양한 비율로 압축 한 후 영상의 질 변화를 알아보았다. 원 영상을 기준으로 압축된 영상을 비교했을 때 물의 CT 계수 측정에서는 압축률 15:1에서 1.93%의 변화, 절편 두께 측정에서는 15:1에서 0.81% 의 변화를 보였다. 균일도는 규칙적인 변화나 통계적으로 유의한 차이가 나타나지는 않았다. 노이즈 측정의 경우 10:1에서 1.47%의 변화를 보이나 15:1에서 10.99%로 증가한 후 변화율 증가 폭이 확대되어 40:1에서 81.68%의 변화율을 보였다. CT 계수, 균일도, 절편 두께, 공간 분해능, 대조도 분해능의 경우 압축률 증가에 따라 영상의 화질 변화율도 증가하나 영향은 크지 않은 것으로 나타났다. 상대적으로 노이즈는 압축에 따른 영향을 많이 받는 것으로 나타났다. JPEG2000 압축 기법으로 AAPM CT Performance Phantom 영상을 평가한 결과 CT영상의 압축을 시행하는 경우 10:1정도의 압축률이 적정한 것으로 판단된다.

Tissue mimicking 초음파 팬텀물질의 개발에 관한 연구 (Development of Tissue mimicking ultrasound phantom materials)

  • 마상철;공영건;박기정;이석
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제26권1호
    • /
    • pp.51-62
    • /
    • 2003
  • 초음파 팬텀의 조직등가물질(TMM)을 합성하기 위하여 폴리우레탄을 주제로 C, CCR, $TiO_2$, tungsten, silver 분말 등의 반사체를 이용하여 폴리우레탄 TMM을 합성하여 다음과 같은 결론을 얻었다. (1) 모든 TMM은 반사체의 경도와 농도가 증가함에 따라 투과도가 균질성이 감소하였으며 (2) C type TMM은 균질성, 투과도, 회새도, 전파속도, 감쇠 등의 음파 특성이 간과 유사한 것으로 나타났고 (3) $TiO_2$ type TMM은 무에코 영역에 점상의 에코가 산재하는 불균질환 양상을 보였고 (4) tungstem type TMM은 간경화와 유사한 불균질한 에코 양상을 보였고 (5) silver type TMM은 대체로 전립선과 유사한 에코 양상의 균질한 양상으로 나타났다. 본 TMM의 개발은 초음파 Q/A 팬텀은 물론 유방, 갑상선, 직장 등의 초음파 훈련용 팬텀(ultrasound previous phantom)의 제작에 기여할 것으로 기대한다.

  • PDF

전신방사선조사 시 선속 스포일러에 따른 선량 분포 및 영향 평가 (Beam Spoiler-dependent Total Body Irradiation Dose Assessment)

  • 이동연;김정훈
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제41권2호
    • /
    • pp.141-148
    • /
    • 2018
  • This study examined the properties of photons and the dose distribution in a human body via a simulation where the total body irradiation(TBI) is performed on a pediatric anthropomorphic phantom and a child size water phantom. Based on this, we tried to find the optimal photon beam energy and material for beam spoiler. In this study, MCNPX (Ver. 2.5.0), a simulation program based on the Monte Carlo method, was used for the photon beam analysis and TBI simulation. Several different beam spoiler materials (plexiglass, copper, lead, aluminium) were used, and three different electron beam energies were used in the simulated accelerator to produce photon beams (6, 10, and 15 MeV). Moreover, both a water phantom for calculating the depth-dependent dosage and a pediatric anthropomorphic phantom for calculating the organ dosage were used. The homogeneity of photon beam was examined in different depths for the water phantom, which shows the 20%-40% difference for each material. Next, the org an doses on pediatric anthropomorphic phantom were examined, and the results showed that the average dose for each part of the body was skin 17.7 Gy, sexual gland 15.2 Gy, digestion 13.8 Gy, liver 11.8 Gy, kidney 9.2 Gy, lungs 6.2 Gy, and brain 4.6 Gy. Moreover, as for the organ doses according to materials, the highest dose was observed in lead while the lowest was observed in plexiglass. Plexiglass in current use is considered the most suitable material, and a 6 or 10 MV photon energy plan tailored to the patient condition is considered more suitable than a higher energy plan.

초음파 탄성 영상 평가를 위한 플라스틱 기반의 팬텀 개발 (Ultrasonic Phantom Based on Plastic Material for Elastography)

  • 안동기;정목근
    • 비파괴검사학회지
    • /
    • 제29권4호
    • /
    • pp.368-373
    • /
    • 2009
  • 초음파 의료용 탄성 영상 시스템의 성능을 평가하기 위한 인체 조직 모사 팬텀을 제작하였다. 인체에서 종양이나 암 조직은 주위의 정상조직보다 단단한 특성을 가진다. 이러한 조직의 단단함을 영상화하는 기법이 탄성 영상 기법이다. 인체의 병변 조직의 기계적인 특성을 모사하기 위하여 플라스틱 경화제와 연화제를 이용하여 탄성도가 다른 균일 탄성 팬텀을 제작하였다. 제작된 균일 탄성 팬텀은 시료의 비율에 따라 $11.1{\sim}79.6$ kPa 범위의 탄성계수 값을 얻었다. 이를 바탕으로 외부 매질과 내부 매질의 탄성계수 차이가 5배와 7배 정도인 초음파 병변 모사 팬텀을 제작하여 탄성 영상을 획득하였다. 본 논문에서는 제작된 플라스틱 기반의 탄성 팬텀이 인체의 탄성 특성을 모사하는 탄성 팬텀으로서 유용함을 확인하였다.

초고주파 가열치료를 위한 MR 호환 동축 슬롯 안테나의 개발 (Development of MR Compatible Coaxial-slot Antenna for Microwave Hyperthermia)

  • 김태형;천송이;한용희;김동혁;문치웅
    • 대한의용생체공학회:의공학회지
    • /
    • 제30권4호
    • /
    • pp.333-340
    • /
    • 2009
  • MR compatible coaxial-slot antenna for microwave hyperthermia was developed while its structure and size of each part were determined by computer simulation using finite element method(FEM). Its local heating performance was evaluated using tissue-mimic phantom and swine muscles. 2% agarose gel mixed with 6mM/$\ell$ $MnCl_2$ as a biological tissue-mimic phantom was heated by the proposed antenna driven by a 2.45GHz microwave generator. The temperature changes of the phantom were monitored using multi-channel digital thermometer at the distance of 0mm, 5mm, 10mm and 20mm from the tip center of the antenna. Also muscle tissue of swine was heated for 2 and 5minutes with 50W and 30W of microwave generator powers, respectively, to evaluate the local heating performance of the antenna. MRI compatibility was also verified by acquiring MR images and MR temperature map. MR signals were acquired from the agarose gel phantom using $T2^*$ GRE sequence with 1.5T clinical MRI scanner(Signa Echospeed, GE, Milwaukee, WI, U.S.A.) at Pusan Paik Hospital and were transferred to PC in order to reconstruct MR images and temperature map using proton resonance frequency(PRF) method and laboratory-developed phase unwrapping algorithm. Authors found that it has no severe distortion due to the antenna inserted into the phantom. Finally, we can conclude that the suggested coaxial-slot antenna has an excellent local heating performance for both of tissue-mimic phantom and swine muscle, and it is compatible to 1.5T MRI scanner.