• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.50-57
• /
• 2022

Reliability of CMOS has been severed under aggressive device scaling. Conventional technologies such as lightly doped drain (LDD) and forming gas annealing (FGA) have been applied for better device reliability, but further advances are modest. Alternatively, electro-thermal annealing (ETA) which utilizes Joule heat produced by electrodes in a MOSFET, has been newly introduced for gate dielectric curing. However, concerns about mechanical stability during the electro-thermal annealing, have not been discussed, yet. In this context, this paper demonstrates the mechanical stability of nanosheet FET during the electro-thermal annealing. The effect of mechanical stresses during the electro-thermal annealing was investigated with respect to device design parameters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.158-161
• /
• 2002

We investigated whether controlled dynamization enhanced regenerative bone healing of the tibia in 12 adult mongrel dogs. An average of 2 cm (∼ 10% of bone length) lengthening was obtained. The left hindlimb was allowed dynamization of 1 mm, 2 mm, and 3 mm in magnitude when 1 cm (∼ 5%) of lengthening was achieved, whereas the right hindlimb was not dynamized and served as a control. Bone mineral density (BMD) of the regenerative bone was measured periodically until nine weeks after the end of distraction. After sacrifice, uniaxial compression testing was performed. Relative BMD ratio and

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1668-1673
• /
• 2008

고분자 복합재 구조물의 경우 일반적으로 여러 층의 단층(laminar)이 적층된 구조로 이루어져 있으며, 모재균열, 층간분리 및 섬유파단과 같은 손상이 발생되어 파단에 이르게 된다. 자가손상 복구기법은 복합소재의 열경화성 수지 내에 손상복구액을 포함하고 있는 마이크로캡슐과 촉매를 투입하여 외부의 도움 없이 손상을 치료할 수 있는 방법으로, 소재의 디자인에 있어서 새로운 페러다임을 제공할 수 있는 것으로 현재 많은 연구가 진행되고 있다. 본 연구에서는 ENB(5-ethylidene-2-norbornene)와 DCPD(dicyclopentadiene)에 대하여 DMA(dynamic mechanical analysis)와 DSC(differential scanning calorimetry)를 이용하여 특성을 분석하였다. 또한 그들의 ROMP(ring-opening metathesis polymerization)반응과의 관계를 조사하였으며, ENB와 DCPD 블렌드에 대한 복구액으로서의 특성도 조사하였다. 본 연구실에서 합성된 두 가지 다른 종류의 ROMP 경화제에 대한 실제 자가손상복구에으로서의 적용상 특성도 연구하였다.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.226.2-226.2
• /
• 2003

.The healing of a bone defect is complex, and involves a wide range of cellular, molecular, physiological, and biological processes. The main effect of bone substitute is to promote wound healing by induce cell proliferation. Bone defect sites usually are localized below the original bone surface; therefore, space production and maintenance between the membrane and the original bone surface is essential. As a result, membranes must have proper mechanical strength to prevent the collapse of the soft tissue and maintain wound space that permits membranes of poly (L-lactide) (PLLA) were fabricated to provide and maintain sufficient space for bone growth. (omitted)

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.17-22
• /
• 2021

Soft robot research has been actively conducted due to the advantages of soft materials that have less motion restrictions and higher energy efficiency compared to rigid robots. In particular, soft robots are being applied in more and more diverse fields, and the need for soft robots is increasing, especially when dealing with soft or deformable objects that rigid robots cannot perform. Various soft robots are being developed, and studies on artificial muscles with versatility, seamless integration with sensing, and self-healing capabilities are being proposed. In this study, we propose one of the most simple rectangular shaped HASEL (Hydraulically amplified self-healing electrostatic) actuators and compare the performance according to shape deformation such as the size or ratio of actuators and electrodes. Developing these actuators can be used in many ways for artificial muscles in soft robotics.

• Clean Technology
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2011

Scientists and engineers have altered the properties of materials such as metals, alloys, polymers, ceramics, and so on, to suit the ever changing needs of our society. Man-made engineering materials generally demonstrate excellent mechanical properties, which often tar exceed those of natural materials. However, all such engineering materials lack the ability of self-healing, i.e. the ability to remove or neutralize microcracks without intentional human interaction. The damage management paradigm observed in nature can be reproduced successfully in man-made engineering materials, provided the intrinsic character of the various types of engineering materials is taken into account. Various self-healing ptotocols that can be applied for the organic materials such as polymers, ionomers and composites can be developed by utilizing suitable chemical reactions and physical intermolecular interactions.

• Composites Research
• /
• v.25 no.5
• /
• pp.136-140
• /
• 2012

This paper describes the bone healing process of fractured long bones such as a tibia applied by composite IM rods using finite element analysis. To simulated tissue differentiation process mechano-regulation theory with a deviatoric strain was implemented and a user's subroutine programmed by a Python code for an iterative calculation was used. To broadly find the appropriate rod modulus for healing bone fractures, composite IM rods were analyzed considering the stacking sequence. To compare mechanical stimulation at fracture gap, two kinds of initial loading conditions were applied. As a result, it was found that the initial loading condition was the most sensitive factor for the healing performance. In case a composite IM rod made of a plain weave carbon fiber/epoxy (WSN3k) had a stacking sequence of $[{\pm}45]_{nT}$, the healing efficiency was the most effective under a initial load of 10%BW.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.166-168
• /
• 2006

$Si_3N_4/SiC$ composite ceramics was sintered in order to investigate their bending strength behavior after crack healing. $Y_2O_$ and $TiO_2$ power was added as sintering additives to enhance it's sintering property. A three-point bending specimen was cut out from sintered plates. About $100\;{\mu}m$ semi-circular surface cracks were made on the center of the tension surface of the three-point bending specimen using Vickers indenter. After the crack-healing processing from $500^{\circ}C$ to $1300^{\circ}C$, for 1 h, in air, the bending strength behavior of these crack-healed specimen coated with $SiO_2$ colloidal were determined systematically at room temperature. $Si_3N_4/SiC$ ceramics using additive powder ($Y_2O_3+TiO_2$) was superior to that of additive powder $Y_2O_3$. The additive powder $TiO_2$ exerted influence at growth of $Si_3N_4$. The optimum crack healing conditions coated $SiO_2$ colloidal were $1000^{\circ}C$ at $Si_3N_4/SiC$ using additive powder ($Y_2O_3+TiO_2$), and $1300^{\circ}C$ at $Si_3N_4/SiC$ using additive powder $Y_2O_3$.

• Journal of Adhesion and Interface
• /
• v.23 no.1
• /
• pp.8-16
• /
• 2022

In this study, self-healable waterborne polyurethane (SH-WPU) as shoes and coating materials with self-healable disulfide functionalities was synthesized by mixing polyether polyol to impart excellent durability and heat resistance and polycarbonate polyol to impart excellent mechanical properties. The synthesized SH-WPU was characterized by fourier transform-infrared spectroscopy (FT-IR), and physical and self-healing properties were confirmed through universal testing machine (UTM) and scanning electron microscope (SEM) measurements. Tensile strength and hardness were increased and elongation was decreased by using polycarbonate polyol. In addition, as a result of comparison of thermal properties, thermal stability has been increased as the content of polycarbonate polyol increased. The healing efficiency showed the highest efficiency when poly(tetramethylene ether)glycol : polycarbonate polyol = 0.75 : 0.25, and it was confirmed that the damaged part was healed through surface observation using a microscope and SEM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.722-727
• /
• 2006

Bone fracture healing is one of the important topics in biomechanics, demanding computation simulations due to the difficulty of obtaining experimental or clinical results. In this study, we adopt the design space optimization method which was established by the authors as a tool for the simulation of bone growth using its evolutionary characteristics. As the mechanical stimulus, strain energy density is used. We assume that bone tissues over a threshold strain energy density will be differentiated and bone tissues below another threshold will be resorbed. Under compression and torsion as loadings, the filling process of the defect is well illustrated following the given mechanical criterion. It is shown that the design space optimization is an excellent tool for simulating the evolutionary process of bone growth, which has not been possible otherwise.