• 한국정밀공학회지
• /
• 제32권4호
• /
• pp.339-344
• /
• 2015

Machine tools are one of the energy-intensive equipment used in the manufacturing industry. The importance of energy has increased and the machine tools are required to be energy-efficient. The servo systems of the machine tool consume electrical power to rotate a spindle and to feed a tool during machining. Servo system consumes a lot of energy when the machine tool is operated. The energy consumption pattern of each axis needs to be investigated in order to optimize the machining process with regard to energy cost. In this paper, an energy monitoring system is developed considering various measuring points of servo system in order to grasp the energy consumption pattern of each axis.

• 대한기계학회논문집A
• /
• 제36권2호
• /
• pp.195-201
• /
• 2012

다양한 소비자의 요구에 따라 가공된 제품을 좀더 신속하고 정확하게 측정할 수 있는 공작기계 내 자동계측장치를 적용하는 사례가 급격히 증가하고 있다. 자동 계측으로 가장 많이 활용되는 접촉식 측정 프로브는 주로 공작물의 가공 원점을 설정하고, 정확한 치수 검사를 통한 불량유무 판정 및 보상가공에 많이 활용된다. 따라서 본 연구에서는 기기상 자동계측장치인 접촉식 측정 프로브를 활용하여 가공된 형상을 신속하고 정확하게 측정하는 방법을 연구하였으며 이를 위하여 가장 많이 활용되는 홀 측정 사이클에 대한 매크로 프로그램을 개발하였다. 또한 측정 시 홀의 진원도 오차에 따라 발생할 수 있는 편심량을 시뮬레이션하여 분석하였으며 본 연구의 신뢰성을 높이기 위하여 기기상에서 개발된 홀 측정 매크로 프로그램을 이용하여 홀플레이트에 대한 측정이 이루어졌으며, 진원도 오차에 따른 편심량을 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1361-1368
• /
• 2005

In this paper, the theoretical method of measuring the tunnel convergence and underground displacement, the objective indices of assessing safety for tunnel construction, using the fiber optic sensor is studied by developing the program to automatically measure them. The model test of Con'c beam is conducted to evaluate reliability of the fiber optic sensor. Furthermore, using the RS232 communication protocol as well as Visual C# and Visual C++, the programming tools, the program was developed to detect automatically the measured value of the fiber optic sensor, calculate the tunnel convergence and underground displacement, predict the deformed shape of the tunnel, and evaluate loosening zone due to the tunnel excavation.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.83-90
• /
• 2002

As high-precision parts are needed with manufacturing techniques improved. the demand of high-precision machine tools has been increasing They are made to developed the precision measuring skill to maintenance the accuracy of themselves as a matter or course We one paper measured straightness and orthogonality of the square to verify that it is possible for CT(circular test) method by 2-dimensional probe and the square to measure orthogonality Furthemore we compared the result of the study with the computer simulation's to prove its possibility and made an improvement of measuring method.

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.618-626
• /
• 2011

The characteristics of construction work cause excessive strain on specific body parts of the construction craft workers. However, there are few tools to mane an accurate measurement of the load on the musculoskeletal system, and the musculoskeletal disorders (MSDs) experienced by the workers have not been properly understood. So, there is an urgent need for development of a tool to measure the load on the musculoskeletal system. Therefore, this research aims to develop a musculoskeletal load measuring device for construction workers. In order to eliminate the noise and errors, an accelerometer, gyro sensors and the Kalman Filter are used in the device developed in this research.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.26-31
• /
• 2008

A precision four-degree-of-freedom measurement system has been developed for simultaneous measurement of four motion errors of a linear stage, which include straightness and angular errors, The system employs a retro-reflector to detect the straightness errors and a plane mirror to detect the angular errors. A common-path compensation method for laser beam drift is put forward, and the experimental results show that the influences of beam drift on four motion errors can be reduced simultaneously. In comparison with the API 5D laser measuring system, the accuracy for straightness measurement is about ${\pm}1.5{\mu}m$ within the measuring range of ${\pm}650{\mu}m$, and the accuracy for pitch and yaw measurements is about ${\pm}1.5$ arc-seconds within the range of ${\pm}600$ arc-seconds.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.19-28
• /
• 1999

In order to control thermal deformation of the machine origin of machine tools a empirical model and a compensation system have been developed, Prior to empirical modeling the volumetric error considering shape errors and joint errors of slides is formulated through the homogeneous transformation matrix (HTM) and kinematic chain. Simulation results of the HTM method show that the thermal error of the machine origin is more critical than position-dependent errors. In order to make a stable and effective software error compensation system the GMDH (Group Method of Data Handling) models are constructed to estimate the thermal deformation of the machine origin by measuring deformation data and temperature data. A test bar and gap sensors are used to measure the deformation data. In order to compensate the estimated error the work origin shift method is developed by implementing a digital I/O interface board between a CNC controller and an IBM PC. The method shifts the work origin as much as the amounts which are calculated by the pre-established thermal error model. The experiment results for a vertical machining center show that the thermal deformation of the machine origin is reduced within $\pm$5$mu extrm{m}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.15-17
• /
• 2004

The quality of X -ray image is depending on the acquired signal pattern So far, the MTF(modulation transfer function) of medical image system has been obtained through various kinds of calculationprocesses after using SWRF (A square wave response function method) to print out it into films. In this study, a tool has been developed that can help the actual user who actually creates the medical images measure the MTF of the finaldisplay image very simply by applying Borland C++ builder software as well as LEAD tools software for the SWRF calculation process to analyze the MTF even on the display image. Films have been printed out by this newly developed MTF measuring tool under the same conditions with the ones for the existing tools and also the calculation method has shown no difference with any existing SWRF calculation method. By using this, it was found out that the MTF of the resolving power of the computed radiography(CR) Image plate (IP) that is a conventional X-ray detection system Jar the conventional X-ray purpose was about 10% at the range of 3.00 LP/mm.

• 한국치위생학회지
• /
• 제19권1호
• /
• pp.1-17
• /
• 2019

This study investigates the overall research trends and related factors affecting the turnover of dental hygienists in Korea during the past 10 years (2007-2017) and analyzed the differences in the results of the research according to the main measurement tools. The literature review focused on turnover of dental hygienists in Korea. Inclusion criteria of selected studies were as follows: the domestic and foreign academic journals and theses published for the past 10 years (between 2007-2017). The most commonly used tool for measuring dental hygienist turnover was a tool developed by Lawler. The most used significant general characteristics is age and income, Job satisfaction (57.1%) and organizational commitment (40.0%) were the most frequently used predictors of turnover. The variables used for each turnover measurement tool were different, showing that the study results was different from according to the variables and significance level. Although there have been many studies related to the turnover of dental hygienists, different results have been shown depending on the measurement tools. When conducting research related to dental hygienist turnover, specific and clear presentation of measurement tool selection or development is needed.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.331-337
• /
• 2020

스마트폰의 고성능 카메라를 사용하여 버니어 캘리퍼스를 대체할 앱의 개발을 목표로 연구를 진행하고 있다. 앱은 제안된 템플릿이 부착된 측정 대상을 촬영한다. 촬영된 영상에서 템플릿을 참조하여 측정 대상에서 사용자가 지정한 지점 간의 거리를 측정한다. 앱의 정밀도는 시중에서 판매되고 있는 버니어 캘리퍼스의 오차 범위를 유지하도록 한다. 시장에 보급된 스마트폰의 카메라는 12M 픽셀이며, 그 이미지 셀의 크기는 1.4㎛이므로 이론적으로 버니어 캘리퍼스보다 더 정밀한 측정이 가능하다. 기존에 제안한 알고리즘에서는 촬영된 소스 영상의 템플릿 형태로부터 기준 거리를 추출하였지만, 제안하는 알고리즘은 알고 있는 템플릿의 기하학적 속성을 이용하여 영상을 보정한 후 거리를 구함으로써 향상된 정밀한 길이를 구할 수 있다.