A Study on the Measurement for Straightness and Orhogonality Using CT Method

CT 법을 이용한 진직도 및 직각도 측정에 관한 연구

  • 이승수 (동아대학교 대학원 기계공학과) ;
  • 김민주 (동아대학교 대학원 기계공학과) ;
  • 박정보 (삼척대학교 기계.정밀. 자동차공학부) ;
  • 전언찬 (동아대학교 기계.산업시스템공학부)
  • Published : 2002.02.01

Abstract

As high-precision parts are needed with manufacturing techniques improved. the demand of high-precision machine tools has been increasing They are made to developed the precision measuring skill to maintenance the accuracy of themselves as a matter or course We one paper measured straightness and orthogonality of the square to verify that it is possible for CT(circular test) method by 2-dimensional probe and the square to measure orthogonality Furthemore we compared the result of the study with the computer simulation's to prove its possibility and made an improvement of measuring method.

Keywords

References

  1. Acceptance Cord for Machine Tools. Part 1, Geometric Accuracy of Machine Operating under No-load or Finishing Conditions ISO 230-1
  2. 알기쉬운 정밀공학 中澤 弘
  3. Acceptance Code for Machine Tool, Part 4, Circular Tests for Numerically Controlled Machine Tools ISO/DIS 230-4
  4. Machine tools-geometric Accuracy Tests and Practical Tests-Test Method JIS B6191
  5. 한국공작기계학회 v.8 no.6 레이저를 이용한 테이블 처짐 측정과 시뮬레이션에 관한 연구 박정보;김민주;전언찬