• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.1001-1006
• /
• 1998

$WO_3$ based semiconduction sensor have been reported to have excellent sension properties to $NO_x$ gases by many researchers. In this study appropriate $WO_3$ precursor have been chosen and thin film sensors were fabricated by metallo organic deposition process. Their sensing characteristics were investigated as a function of NO concentration, heat treatment, and measuring temperature. Tungsten dichloro triethoxide was found to be a good precursor for $WO_3$ thin film in this method. Samples heat treated at $600^{\circ}C$ showed sensitivity (S) 200 to 50 ppm NO gas when measuring temperature was $150^{\circ}C$.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1165-1169
• /
• 2007

In this study, a novel sensor system for measuring the temperature inside an oral cavity is proposed. With this aim, a small size of thermistor was used for resolving the cavity's temperature with the resolution of $0.1^{\circ}C$. To evaluate effectiveness of our sensor system, the temperature and its output voltage characteristic, and the specifications of response are investigated. It turned out to be that our sensor system has a linear property in terms of temperature variations for a healthy subject's body temperature range and has a good response time within 3 seconds. Also, in order to investigate the medical application, our sensor system is sought to measure the real temperature variations of a subject's oral cavity and ark shell especially for 'before' and 'after' exercise mode.

• Journal of Biosystems Engineering
• /
• 제36권2호
• /
• pp.122-129
• /
• 2011

This study was performed to develop a wireless system for measuring agricultural atmospheric factors using ubiquitous sensor network(USN). In the study, temperature, humidity and light intensity were selected and evaluated as major agricultural atmospheric factors. An USN system was designed and implemented by using Zigbex I and II (mote sensor nodes of MICA series) provided by Hanback Electronics, Korea. The system was tested in a greenhouse and an orchard. The experiment results showed that the suggested USN measuring system would be very effective on comprehensive measurement of the selected factors on the basis of time, day, spatial sequence with reasonable costs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.675-680
• /
• 2008

This paper proposes a way to measure the displacement of a multi-point by using a pattern recognition from video signal. Generally in measuring displacement, gab sensor, which is a displacement sensor, is used. However, it is difficult to measure displacement by using a common sensor in places where it is unsuitable to attach a sensor, such as high-temperature areas or radioactive places. In this kind of places, non-contact methods should be used to measure displacement and in this study, images of CCD camera were used. When displacement is measure by using camera images, it is possible to measure displacement with a non-contact method. It is simple to install and multi-point displacement measuring device so that it is advantageous to solve problems of spatial constraints.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1959-1965
• /
• 2011

Measuring the movement of joint angle of human body is very important clinically. Human joint angle displacement can be used to evaluate the degree of disease and disability. Also, we can determine the rehabilitation process with angular information. Conventional methods for measuring angular displacement are many weakness. The purpose of this study is to overcome the limitations of existing equipments by using optical method. For this reason, optical sensor system was used to correlate detected light signal with joint angle. Experimental results of the applied joint model in this study showed that joint angular displacement can be measured by optical signals. The suggested method is simple, durable, small, lightweight, convenient, and cost effective.

• 한국콘텐츠학회논문지
• /
• 제9권1호
• /
• pp.73-80
• /
• 2009

본 논문은 선박 블록의 조립을 위한 센서 기반 원격 모니터링 방법 및 프로토타입 시스템의 구축에 대하여 기술한다. 제안한 접근 방법은 수작업이나 광학 측정장비를 사용하는 대신, 주요 계측 지점에 조립되는 블록간 거리 측정이 가능한 센서 모듈을 설치하고, 블록간의 조립 정확도에 대한 데이타를 전달받아 원격으로 모니터링할 수 있도록 하는 것이다. 이를 통해 블록 조립 및 탑재 과정에서 정합의 오차를 최소화시키므로써 효율적인 선박의 건조를 지원하도록 한다.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.101-107
• /
• 2003

A new mechanical probe for 3-D feature measurement on coordinate measuring machines (CMMs) is presented. The probe is composed of the contact stylus and the three-component force sensor. With the stylus mounted on the force sensor, the probe can not only measure 3-D features, but also detect contact force acting on the stylus tip. Furthermore, the probing direction and the actual contact position can be determined by the relationship among three components of contact force to be detected. In this paper, transformation matrix representing the relationship between the external force acting on the stylus tip and the output voltages of measurement gauges is derived and calibrated. The prototype of probe is developed and its availability is investigated through the experimental setup for calibration test of the probe. A series of experimental results show that the proposed probe can be an effective means of improving the accuracy of touch probing on CMM.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.1126-1135
• /
• 1996

This study was conducted to select the sensors for measuring temperature, relative humidity, and air velocity among the major environmental factors affecting the pig productivity as a part of the study for the optimum production system model development of pig-housing. The study results are summarized as the follows : Two sensors , HMP233L and HANI, were tested for measuring temperature and relative humidity , Test results were analyzed by the statistical methods. And the sensor, HMP233L was selected as a proper sensor for temperature sand relative humidity measurement . An air velocity sensor was tested. Test results showed that its accuracy was low and incongruent for the air velocity measurement when it was lower than 4m/s.

• Journal of Biosystems Engineering
• /
• 제17권4호
• /
• pp.404-409
• /
• 1992

It is important to measure the somatic informations for stockbreeding automatization. This study was carried out for the development of wireless measurement system of sphygmus in living animals. In meauring sphygmus counting with the single-channel telemety system, a LED-photo transistor sensor showed more sensitivity to the change of blood pressure than a piezo-electric sensor based pressure sensor. The LED-photo transistor sensor resulted ${\pm}1.29%$ of measurement error of sphygmus counting. In the process of transmitting and receiving the blood pressure signal for counting sphygmus, noises were mixed with, and the noises made the counting almost impossible. Auto-correlation analysis technique was applied to the signal data to extract the sphygmus information, and the technique was proved to be very effective.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.257-258
• /
• 2006

This paper presents the displacement sensor based on astigmatic method that has a small measurement range. The sensor has the characteristic that the measuring range is changed easily by exchanging a objective lens or distance between a objective lens and a collimator lens. The measuring range and resolution is evaluated by a laser interferometer.