References
- W. Tyler Estler, Phillips, S. D., Borchardt, B., Hopp, T., Witzgall, C., Levenson, M., Eberhardt, K., McClain, M., Shen, Y. and Zhang, X., 'Error Compensation for CMM Touch Trigger Probes,' Precision Engineering, Vol. 19, pp. 85-97, 1996 https://doi.org/10.1016/S0141-6359(96)00040-2
- W. Tyler Estler, Phillips, S. D., Borchardt, B., Hopp, T., Levenson, M., Eberhardt, K., McClain, M., Shen Y. and Zhang, X., 'Practical Aspects of Touch-Trigger Probe Error Compensation,' Precision Engineering, Vol. 21, Issue 1, pp. 1-17, 1997 https://doi.org/10.1016/S0141-6359(97)00062-7
- J. R. Rene Mayer, Abdeljabbar Ghazzar, Olivier Rossy, '3D Characterization, Modeling and Compensation of the Pre-travel of a Kinematic Touch Trigger Probe,' Measurement, Vol. 19, No.2, pp. 8394,1996 https://doi.org/10.1016/S0263-2241(96)00068-1
- Kim, S. H., Lee, S. J. and Kim, O. H., 'The Analysis of Measuring Error in OMM System,' J. of the KSPE, Vol. 15 No. 5, pp. 34-42,1998
- Lee, Se-Hee, Cho, Myeong-Woo and Seo, Tae-Il, 'Measurement Error Modeling for On-Machine Measurement of Sculptured Surfaces,' Int. J. of the KSPE, Vol. 2, No.2, pp. 73-80,2001
- Xiong, Z. H., Li, Z. X., 'Error compensation of workpiece localization,' IEEE Inter. Conf. on Robotics and Automation, pp. 2249-2254, 2001 https://doi.org/10.1109/ROBOT.2001.932957
- Shuh-Ren Liang and Alan C. Lin, 'Probe-Radius Compensation for 3D Data Points in Reverse Engineering,' Computers in Industry, Vol. 48, Issue 3, pp. 241-251, 2002 https://doi.org/10.1016/S0166-3615(02)00038-6
- Steven D. Bittle and Thomas R. Kurfess, 'An Active Piezoelectric Probe for Precision Measurement on a CMM,' Mechatronics, Vol. 7, No.4, pp. 337-354, 1997 https://doi.org/10.1016/S0957-4158(97)00005-6
- Wim P. van Vliet, Peter H. J. Schellekens, 'Development of a Fast Mechanical Probe for Coordinate Measuring Machines,' Precision Engineering, Vol. 22, pp. 141-152, 1998 https://doi.org/10.1016/S0141-6359(98)00008-7
- Joao Bosco de Aquino Silva, M. Burdekin, 'A Modular Space Frame for Assessing the Performance of Coordinate Measuring Machines (CMMs),' Precision Engineering, Vol. 26, pp. 37-48, 2002 https://doi.org/10.1016/S0141-6359(01)00096-4