• PNF and Movement
• /
• 제11권2호
• /
• pp.9-19
• /
• 2013

Purpose : Study on the effects of attention(working memory) for normal adults by applying transcranial Direct Current Stimulation(tDCS). Methods : There are two groups of 10 random people aged between 20 to 30, one is an experimental group(stimulation) and the other is a comparison group(simulate stimulation). For the 1st da y, pre-stimulation test is executed, and for the 2nd day to the 4th day, tDCS is applied stimulated both on the right prefrontal lobe and the left occipital lobe through the electrode. The stimulation lasts for 15 minutes with voltage power of 1mA for each day. The post-stimulation test is executed on the day of 5th. In this paper, a FAIR attention test is used for measuring the attention. Results : As the result of the experiment, there are significant gaps both on the value of P, the ability of selective attention, and the value of C, the consistent ability after the stimulation on right prefrontal and left occipital lobe. And there is no significant gap on the value Q, the quality(Control). However, all the P, Q, and C values are increased according to the average value between the pre-stimulation test and the post-stimulation. Conclusion : Finally, ability of selective attention and self-control, and consistent attention is progressed by applying the tDCS to the normal people.

• Current Photovoltaic Research
• /
• 제8권4호
• /
• pp.129-133
• /
• 2020

It is very important to optimize the reflectance of incident light in solar modules for improving output power and reducing loss of cell-to-module (CTM). It is assumed that a higher reflectance backsheet may improve optical efficiency. However how much output power is related to optical properties by reflectance property of backsheets have not been revealed clearly yet. A total of 3 types of industrial backsheets with 3 type of industrial encapsulants (EVA or POE) were analyzed as fabricated mini modules used shingled cells. According to the type of backsheets, the difference between the highest and lowest average reflectance in the range of 400 nm to 1200 nm was found to be 13.08% by UV-visible spectroscopy. Also, when using the same encapsulant, the maximum gap value of the output power increase was measured by about 3.755 mW% (166.02 mW). The correlation between reflectance and output power was experimentally found by measuring the output property of the fabricated shingled mini modules.

• 한국컴퓨터정보학회논문지
• /
• 제27권3호
• /
• pp.225-238
• /
• 2022

인공지능 리터러시에 대한 중요성이 증가하고 있지만, 인공지능 리터러시를 측정하기 위한 검사 도구가 부족한 상황이다. 따라서 본 연구에서는 중학생의 인공지능 리터러시를 측정하기 위한 검사 도구를 개발하였다. 검사 도구 개발을 위하여 전문가 집단을 구성하고, 검사 도구의 요인과 문항을 개발하였다. 개발한 검사 도구의 신뢰도와 타당도를 확보하기 위하여 현장 적합성 검토, 탐색적 요인 분석, 확인적 요인 분석을 진행하였다. 이러한 연구를 통하여 6개의 하위 영역과 30개의 문항을 가진 검사 도구를 개발하였다. 검사 도구의 하위 영역은 인공지능의 사회적 영향(8문항), 인공지능의 이해(6문항), 인공지능 실행 계획(5문항), 인공지능 문제 해결(5문항), 데이터 리터러시(4문항), 인공지능 윤리(2문항)가 있다. 검사 도구는 5점 리커트 척도로 응답하게 개발되었으며, 내적 일치도 계수는 전체가 .970이며, 하위 영역은 .861~.939이었다. 본 연구는 인공지능 리터러시의 발달 과정 분석, 교수-학습, 교육과정 등의 연구에 활용될 수 있다.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.186-195
• /
• 2007

Key Performance Indicators (KPIs) are the criteria of measuring project performance in order to attain construction excellence. Previous researchers have examined the abstract concept of success for general new construction and identified its relationship with the factors of success. In fact, most buildings exist to satisfy the needs of people. With the passing of time and change in technology, buildings have to be maintained and renovated in order to continue functioning properly for the benefits of users. Therefore, criteria and factors of success have increasingly attracted the attention of both researchers and practitioners, especially in cities where buildings become ageing. However, the topic of project success for maintenance projects is less discussed in previous research, and project participants, including maintenance surveyors should be able to identify the success measurement and its associated factors for performance improvement. This study fills the research gap by investigating the criteria and factors of success for maintenance projects. It first provides a summary of the literature review on the criteria and factors of success for construction projects. An empirical study has also been carried out with ten practitioners in Hong Kong to further identify the criteria and factors critical for the success of maintenance projects in practice. While most criteria and factors of success for new construction projects are also applicable to maintenance projects, participants in maintenance projects believe that effective communication is in particular important to provide quality service to the end-users.

• 대한치과교정학회지
• /
• 제53권4호
• /
• pp.254-263
• /
• 2023

Objective: The evidence on the accuracy of bite registration using intraoral scanners is sparse. This study aimed to develop a new method for evaluating bite registration accuracy using intraoral scanners. Methods: Two different types of models were used; 10 stone models and 10 with acrylic resin teeth. A triangular frame with cylindrical posts at each apex (one anterior and two posteriors) was digitally designed and manufactured using three-dimensional (3D) printing. Such a structure was fitted in the lingual space of each maxillary and mandibular model so that, in occlusion, the posts would contact their opposing counterparts, enforcing a small interocclusal gap between the two arches. This ensured no tooth interference and full contact between opposing posts. Bite registration accuracy was evaluated by measuring the distance between opposing posts, with small values indicating high-accuracy. Three intraoral scanners were used: Medit i500, Primescan, and Trios 4. Viewbox software was used to measure the distance between opposing posts and compute roll and pitch. Results: The average maximum error in interocclusal registration exceeded 50 ㎛. Roll and pitch orientation errors ranged above 0.1 degrees, implying an additional interocclusal error of around 40 ㎛ or more. The models with acrylic teeth exhibited higher errors. Conclusions: A method that avoids the need for reference hardware and the imprecision of locating reference points on tooth surfaces, and offers simplicity in the assessment of bite registration with an intraoral scanner, was developed. These results suggest that intraoral scanners may exhibit clinically significant errors in reproducing the interocclusal relationships.

• KDI Journal of Economic Policy
• /
• 제46권1호
• /
• pp.21-51
• /
• 2024

Since the Global Financial Crisis of 2008-2009, the importance of nonbank financial institutions in macroprudential management has increased significantly. Consequently, major countries and international financial institutions have been actively discussing and implementing macroprudential supervision and regulation for non-bank financial institutions (NBFI). In this context, this paper analyzes the systemic risk of both banks and non-bank sectors (securities firms and insurance companies) in South Korea over different time periods. Using the widely recognized ΔCoVaR methodology for measuring systemic risk, the analysis reveals that systemic risk increased substantially across all three sectors (banks, securities firms, and insurance companies) during the Global Financial Crisis, the European Sovereign Debt Crisis, and the COVID-19 pandemic. Although the banking sector exhibited relatively high systemic risk compared to the securities and insurance sectors, the relative differences in systemic risk varied across the different crisis periods. Notably, during the margin call crisis in March of 2020, the gap in systemic risk between the banking and securities sectors decreased significantly compared to that during both the Global Financial Crisis and the European Sovereign Debt Crisis, indicating that securities firms had a more substantial impact on risk in the overall financial system during this period. Furthermore, I analyze the impact of the issuance of equity-linked securities (ELS) by financial institutions on systemic risk, as measured by ΔCoVaR, finding that an increase in the outstanding balance of ELS issuance by financial institutions had an impact on increasing ΔCoVaR during the three crisis periods. These findings underscore the growing importance of non-bank financial institutions in relation to South Korea's macroprudential management and supervision. To address this evolving landscape, enhanced monitoring and regulatory measures focusing on non-bank systemic risk are essential components of maintaining financial stability in the country.

• 대한불안의학회지
• /
• 제20권1호
• /
• pp.27-34
• /
• 2024

Objective : Cognitive fusion, or believability, in acceptance and commitment therapy (ACT), refers to the tendency to become entangled in one's thoughts or feelings. It is an important factor in the development and maintenance of anxiety disorders. However, there is a lack of validated self-report measures for cognitive fusion and defusion, particularly for individuals with anxiety. To address this gap, this study aimed to evaluate the Korean Version of Believability of Anxious Feelings and Thoughts Questionnaire (K-BAFT). Methods : A total of 608 university students and 85 patients with obsessive-compulsive disorder (OCD) took part in this study. They were asked to complete various psychological measures, including the K-BAFT, other measures of ACT processes, and symptom scales. The researchers then analyzed the psychometric characteristics of the K-BAFT. Results : The results of the exploratory and confirmatory factor analyses indicated that the three-factor structure of the K-BAFT, which was reported in the original study, was also found in the university sample. Additionally, both the student and the OCD group demonstrated strong internal consistency (α=0.86 and 0.91, respectively). In the university sample, the K-BAFT showed a strong correlation with the Cognitive Fusion Questionnaire (r_s=0.53, p<0.001). However, it had a weak correlation with symptoms scales for depression, anxiety, and stress (all r_s<0.32). Furthermore, the OCD group had higher scores on the K-BAFT compared to the university sample. Conclusion : K-BAFT is considered to be a reliable and valid self-report tool for measuring cognitive fusion with anxious thoughts and feelings.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.344-350
• /
• 2024

기준음원은 음향파워 측정에 활용되는 중요한 기준기로, 국제 표준으로 그 사양이 규정되어 있으며, 측정 표준 분야에서 주요 교정 품목으로 분류되고 있다. 이러한 기준음원은 공급 전압에 의하여 그 출력이 영향을 받기 때문에 각국에서 자체적으로 교정 서비스 체계를 확보할 필요가 있다. 본 연구에서는 잔향실 조건에서 기준음원을 교정하는 절차를 수립하고 불확도를 평가하였다. 교정 절차는 기본적으로 음향 파워의 정밀급 측정과정을 적용할 수 있으며, 여기서는 ISO 3741의 잔향실을 활용한 측정 방법을 검토하였다. 이를 위한 측정 시스템을 구성하고 실제 2종의 기준 음원에 대하여 측정을 수행하고 측정 불확도를 산출하였다. 측정 예를 통하여 잔향실 내 음압 분포의 불균일성과 체적 측정 불확도가 전체 불확도에 기여가 큰 것을 확인하였다. 추가적으로 입력 전압에 대한 영향을 실험적으로 검토하여 음향 파워 측정에서 반영할 수 있는 불확도 기여량을 검토하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권4호
• /
• pp.79-86
• /
• 2006

피복 콘크리트의 균열 발생에 기인한 매크로셀 부식 환경하에서의 Cr강방식철근의 방식성을 평가하기 위하여 10종류의 Cr강방식철근을 콘크리트에 매입 후 피복 콘크리트에 모사 균열을 발생시킨 공시체를 제작하였다. 그 후 염수 분무 촉진 양생 105사이클까지의 매크로셀 부식전류밀도의 경시변화와 아노드 캐소드 철근의 자연전위, 부식면적률, 부식감량률을 측정함으로써 Cr강방식철근의 방식성에 대하여 검토하였다. 그 결과, 염화물 이온 농도차 $3kg/m^3$ 이하의 매크로셀 부식 환경에 대하여 Cr함유율 9% 이상의 Cr강재에서 방식성이 확인되었으며 특히, Cr함유율 11% 이상의 Cr강재에서 뛰어난 방식성이 입증되었다.

• 농업과학연구
• /
• 제49권4호
• /
• pp.845-855
• /
• 2022

The purpose of this study is to develop a self-propelled underground crop harvester and its performance was evaluated by measuring the load during actual potato harvesting operations. This study was conducted at a constant working speed of 1 km·h^-1. A load measurement system was installed to measure the actual load and the required working power was analyzed. A hydraulic pressure sensor was also installed to measure the hydraulic pressure. The required hydraulic power was calculated using the hydraulic pressure and flow rate. The results showed that the engine speed, torque, and power during harvesting operation were in the range of 845 - 1,423 rpm, 95 - 228 Nm, and 9 - 31 kW, respectively. Traction power, excluding the hydraulic pump of the tractor and power take-off (PTO) output, was in the range of 9 - 28 kW, and it was confirmed that it occupies a ratio of 16.2 to 50% of the engine rated output. The engine can supply the minimum required traction power to move the vehicle. This means that the engine used in this study could be down-sized to be suitable for an underground crop harvester. In this study, the gear stages of the tractor were not considered. This research thus shows the possibility of developing a self-propelled underground crop harvester.