• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.114-120
• /
• 2000

Fossil power plant availability is significantly affected by gradual degradations of equipment as operation of the plant continues. It is quite important to determine whether or not to replace some equipment and when to replace the equipment. Performance calculation and analysis can provide the information. Robustness in the performance calculation can be increased by using verification ＆ validation of measured input data. We suggest new algorithm in which estimation relation for validated measurement can be obtained using correlation between measurements. Input estimation model is obtained using design data and acceptance measurement data of domestic 16 fossil power plant. The model consists of finding mostly correlated state variable in plant state and mapping relation based on the model and current state of power plant.

• Wind and Structures
• /
• 제18권4호
• /
• pp.375-389
• /
• 2014

The high-frequency force-balance (HFFB) technique and its subsequent improvements are reviewed in this paper, including a discussion about nonlinear mode shape corrections, multi-force balance measurements, and using HFFB model to identify aeroelastic parameters. To apply the HFFB technique in engineering practice, various validation studies have been conducted. This paper presents the results from an analytical validation study for a simple building with nonlinear mode shapes, three experimental validation studies for more complicated buildings, and a field measurement comparison for a super-tall building in Hong Kong. The results of these validations confirm that the improved HFFB technique is generally adequate for engineering applications. Some technical limitations of HFFB are also discussed in this paper, especially for higher-order mode response that could be considerable for super tall buildings.

• 환경영향평가
• /
• 제21권6호
• /
• pp.893-901
• /
• 2012

Aircraft noise model such as FAA Integrated Noise Model(INM) has recently been used for forecasting the impact of noise in a residential area near an airport and quantifying the effect of various options for noise mitigation. The noise modeling should be reliable and precise in order to ensure the quality of the results provided. In this study, the validation of the noise levels simulated by the INM against measurement data recorded continuously at multiple monitoring sites was discussed. As a result of validation, the quality of the input data used as a fixed point profiles for the INM was enhanced. The noise contour maps were designed as a way to evaluate the aircraft noise of the vicinity of the airfield. The results of this study indicate that the validation of aircraft noise model by the measurement data would be required for the accurate assessment of the aircraft noise levels.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1625-1634
• /
• 2000

Verification of measurements is required for precise evaluation of turbine cycle performance in nuclear power plant. We assumed that initial acceptance data and design data of the plant could provide correlation information between performance data. The data can be used as sample sets for the correct estimation model of measurement value. The modeling was done practically by using regression model based on plant design data, plant acceptance data and verified plant performance data of domestic nuclear power plant. We can construct more robust performance analysis system for an operation nuclear power plant with this validation scheme.

• Journal of the Korean Data and Information Science Society
• /
• 제26권1호
• /
• pp.209-216
• /
• 2015

Quantile regression models with covariate measurement errors have received a great deal of attention in both the theoretical and the applied statistical literature. A lot of effort has been devoted to develop effective estimation methods for such quantile regression models. In this paper we propose the partially linear support vector orthogonal quantile regression model in the presence of covariate measurement errors. We also provide a generalized approximate cross-validation method for choosing the hyperparameters and the ratios of the error variances which affect the performance of the proposed model. The proposed model is evaluated through simulations.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.746-749
• /
• 2002

This paper is introducing a radio control helicopter as a new platform of ground truth measurement. This helicopter is normally used for spraying an agricultural chemical. It can do pinpoint hovering and programing flight using DGPS etc., A spectrometer with dual port can measure ground surface and white reference plate at the same time. And it can also take digital images by digital camera. It is needed to collect ground reflectance information as satellite sensor footprint size for satellite data validation. Generally it is possible to get such ground reflectance by an airplane measurement. But it is high cost and not so easy to make a measurement by airplane. Developed validation system can provide such ground reflectance in low cost and easy.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.49-57
• /
• 2018

The main objective of this paper is come up with methodology approach for FPGA-based system in verification and validation lifecycle regarding software reliability using system engineering approach. The steps of both reverse engineering and re-engineering are carried out to implement an FPGA-based of safety critical system in Nuclear Power Plant. The reverse engineering methodology is applied to elicit the requirements of the system as well as gain understanding of the current life cycle and V&V activities of FPGA based-system. The re-engineering method is carried out to get a new methodology approach of software reliability, particularly Software Reliability Growth Model. For measure the software reliability of a given FPGA-based system, the following steps are executed as; requirements definition and measurement, evaluation of candidate reliability model, and the validation of the selected system. As conclusion, a new methodology approach for software reliability measurement using software reliability growth model is developed.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.81-89
• /
• 2001

우주 항공위성 시스템은 변하는 불확실한 우주항공 환경에(서) 운행되고 지상기지국으로부터의 원격통신 없이 장시간 동안 동작해야 할 자율적인 능력이 요구되고, 결함 없이 임무를 수행하여야 하며, 시스템에서 계측된 데이터의 신뢰성을 유지하기 위한 고장 상태 검출과 오류 수정 시스템을 차보하는 것이 중요하다. 본 논문에서는 확장 칼만 필터 기법을 적용한 동적모델 시뮬레이션 기법(High Fidelity, Dynamic Model-based Simulation)을 제안하였으며, 제안된 시스템은 비정상적인 데이터의 효과적인 검출과 대응이 가능해짐으로써 신뢰성 있는 우주항공위성시스템을 구축하도록 자동 상태 진단/데이터 시스템에 고장검출/오류수정 시스템을 적용하는 것이다. (Autonomous Spacecraft Health Monitoring/Data Validation Control System : ASHMDVCS).

• 디지털융복합연구
• /
• 제6권2호
• /
• pp.157-164
• /
• 2008

The current research utilized as its target population who are current users of web based information system in Korea. The research validated the dimensions by studying he constructs within the context of the web based information system user population. Correlation was found between Flow dimensions retained as components of a ross-Cultural Model. It was determined that these two dimensions-Intrinsic Interest and Control-are significant predictors of user success. The Cross-Cultural Model was validated, and it is therefore suggested as a basis for further study of user success indicators in he cross-cultural enterprise environment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1717-1720
• /
• 2002

Objective quality measurement schemes that in- corporate properties of the human auditory system. The basilar membrane(BM) acts as a spectrum analyzer, spatially decomposing the signal into frequency components. Each filterbank is an implementation of the ERB, gam-machirp function. This filterbank is level-dependent asymmetric compensation filters. And for the validation of the auditory model, we calculate the CPD. Quality measurement is obtained from the result.