• Journal of Veterinary Clinics
• /
• v.39 no.3
• /
• pp.114-120
• /
• 2022

The purpose of this study is to examine the status of quality control using multipurpose phantom of ultrasound equipment used in hospital of veterinary college in South Korea by using ATS-539 multipurpose phantom so as to examine quantitative and objective new image evaluation method. Specialists discussed and analyzed multipurpose phantom images acquired by using convex transducer of 10 ultrasound imaging devices, currently used in 9 veterinary colleges, at 4.0-6.0 MHz. Total 8 items that can be measured with ATS-539 multipurpose phantom including dead zone, vertical and horizontal measurement, axial/lateral resolution, sensitivity, focal zone, functional resolution and gray scale/dynamic range were evaluated. For qualitative evaluation, valid decisions were made based on dead zone, axial/lateral resolution, and gray scale/dynamic range which are resolution index, and coefficient of variation (COV) and blind referenceless image spatial quality evaluator (BRISQUE) were found to increase objectivity. As a result of experiment, all the targeted ultrasonic devices were found appropriate from qualitative evaluation items of dead zone, axial/lateral resolution, and gray scale/dynamic range. In other evaluation items, they were found to be appropriate from focal zone and vertical measurement of quantitative evaluation while inappropriate from horizontal measurement, sensitivity, and functional resolution. COV value was 0.12 ± 0.04, and BRISQUE value was 47.77 ± 2.77, both analysis results show that the noise level of all ultrasonic devices was located within tolerance range. Upon image examination using ATS-539 multipurpose phantom, they were 100% appropriate with inspection standards of dead zone, axial/lateral resolution, and gray scale/dynamic range, and besides, focal zone and functional resolution can be used as evaluation items. In the field of veterinary medicine, 8 standard items using ATS-539 multipurpose phantom and image evaluation items using COV and BRISQUE can be used as standards for quality control of ultrasonography machine.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.59-79
• /
• 2021

Service-related research in accordance with the transition to the service economy era has been conducted in a wide variety of ways, but the development of a service-related scale suitable for the present time is still insignificant. The purpose of this study is to define the nature of services and to develop measurement items for them. First, four categories of service nature were adopted in the previous study. The four categories are 'relationship', 'interactivity', 'horizontality', and 'harmony'. In this study, sub-factors and specific items of each of these four service essences were extracted and developed as measurable items. As a qualitative study, the four categories of sub-factors were extracted, and a mixed study was adopted to prove the reliability and validity of the extracted factors through quantitative studies. The scale items were identified through literature study, free response method, and Delphi technique, and the measurement items were refined through a second questionnaire of 30 Delphi panels composed of experts. As a result of the study, 15 out of 52 questions for relationship, 11 out of 45 questions for bilateral direction, 9 out of 33 questions for horizontality, and 17 out of 61 questions for harmonization were derived after secondary refining. Through this study, it was possible to uncover new essential items suitable for the service economy era. SNS, network, synergy, platform, system, real name, and breakthrough are concepts that have not been obtained in previous studies, and can be seen as contributions of this study. However, due to various limitations, this study did not cover all aspects of the service, but mainly dealt with people-centered services, which are part of the service. In the future, it is necessary to study the development of service essence measurement items for the overall aspect of services developed according to the evolution of the service economy era.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.130-143
• /
• 2019

The purpose of this study is to identify factors of 25~36 months old infant's happiness and to develop a scale to measure infant happiness. The subjects were 250 infants aged 25~36 months. The results of this study are as follows: First, the components and items of infant's happiness scale selected through the literature, the previous measurement tool, and the focus group interview were 8 components and 29 items. The items were composed of 4 items of problem behavior, 4 items of achievement through immersion, 4 items of relationship with friends, 4 items of relationship with teacher, 3 items of physical environment, 4 items of positive emotion, 3 items of negative emotion, and 3 items of health. Second, as a result of validation of validity for infant's happiness scale, the item fit was confirmed with CFI=0.89, TLI=0.88, and RMR=0.05. Also, the construct validity was confirmed with convergent validity and discriminant validity. The concurrent validity was significantly correlated with the components of the previously developed measurement tools, and the reliability was appeared with 0.71-0.89. The infant's happiness scale developed in this study ensured reliability and validity as a measurement to measure infant happiness. Therefore, this scale is expected to be used as a major test tool to develope and verify a program for promoting infant happiness.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.2
• /
• pp.84-92
• /
• 2004

A process control procedure is proposed when 100% inspection is performed in a process with excellent capability. Only the incomplete measurement data is assumed to be available, i.e. the specific measurement value of the quality characteristic is not available for each item but it can be determined to be smaller or larger than any prescribed value. In the suggested model, a signal limit is introduced to determine whether the process under study is in control or not. If the quality characteristic of an incoming item exceeds the upper signal or the lower signal limit, the process is determined to be stopped or not by comparing the number of consecutively accepted items with a predetermined threshold number. The procedure is designed based on the type I and II errors. The performance of the model is evaluated by the expected number of items produced under the in-control and out-of-control states until the process is stopped.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.148-154
• /
• 2012

The purpose of this study is to develop measurement items for quality cost in service industries. Quality cost is necessary in order to evaluate quality management activities. It is clear that the quality cost in service industry is different from manufacturing industry. Generally, in service industries, quality cost is very difficult to assess because it has a unique characteristics. This paper proposes an effective method for measuring quality cost in service industries. Based on the PAF (Prevention, Appraisal, Failure) cost model, we utilizes the concept of five demensions in SERVQUAL which are tangibles, reliability, responsiveness, assurance, empathy. This paper also presents to a standard model for quality cost measurement in service industries.

• Knowledge Management Research
• /
• v.19 no.4
• /
• pp.149-170
• /
• 2018

Healthcare lifelog, a personal record relating to disease treatment and healthcare, plays an important role in healthcare paradigm shifts in which medical and information technology converge. Healthcare services based on various healthcare lifelogs are being launched domestically by both large corporations and small and medium enterprises, however, they are being built on an individual platform that is dependent on each company. Therefore, the terms of lifelog data are different as well as the measurement specifications are not uniform. This study proposes a reference model for minimum common data required for sharing and utilization of healthcare lifelog. Literature study and expert survey derived 3 domain, 17 essential items, and 51 sub-items. The model provides definition, measurement data format, measurement method, and precautions for each detailed measurement item, and provides necessary guidelines for data and service design and construction for healthcare service. This study has its significance as a basic research supporting the activation of ecosystem by ensuring interoperability of data between heterogeneous healthcare devices linked to digital healthcare platform.

• Journal of the Ergonomics Society of Korea
• /
• v.10 no.2
• /
• pp.31-42
• /
• 1991

To understand the shape of the neck in a view of garment planning, principal component analysis has been appliedto the measurement of the neck. The neck surface development and the cross sections of the neck have been observed. The materials consist of the body mearsurements, the neck surface developments and the cross sec- tions of the necks of a total of 108 korean woman students. The difference between the right side and the left side of the neck has not been reconginiged. But the differenece among the height of the front neck point, that of the side neck point and that of the back neck point has been recognized. 2. The initial 41 items have been found having variety and duplication. So two criteria have been made to solve those problems and the selection of 34 items have been made by each criterion. 3. 43 and 34 items have been compared by means of accumulative ratios of contribution and of clearness within the meaning of principal component. As a result, 34 measurement items have been further anylysis. 4. As a result of principal component analysis on the 34 items, the four principal components have been found obtaines and inter-preted. The four principal components are 1) the thick of the neck, 2) the front neck-line on the waist basic pattern, basic pattern, 3) the shape of the neck surface development, and 4) the back neck-line on the waist basic pattern. 5. According to the graphic informations concerning these principal components, the meaning of these four principal components has been grasped on the visual. As a result, there is a large individual difference in the shape of neck.

• Journal of the Korean housing association
• /
• v.22 no.1
• /
• pp.43-55
• /
• 2011

The purpose this study is to develop indicators that measure the healthy housing condition of multi-family housing. The major findings are as follow: first, healthy housing was defined by physical, mental, social, and management aspects and proposed the conceptual model of hierarchy structure of evaluation of healthy housing by literature reviews. Second, evaluating items were selected based on literature reviews of existing indicators and preceding studies about both domestic and overseas multi-family housing. The evaluating indicators were identified as a total of 87 evaluating items which were composed of four dimensions and 16 attributes on the basis of the conceptual model. They cover comprehensive scope of the multi-family housing such as unit, building, complex, and site. Third, as the measurement, the 5-point ordinal scale measure was suggested. The evaluating measurement including measure standards, measure methods, and measure contents were developed by each evaluating items. Lastly, the weighting of evaluating indicators was developed by AHP method conducted by survey of an expert group. Items were identified as high contributors or low contributors. The weighting of these items could suggest several evaluations according to the situation. The level of healthy housing condition may be evaluated by both total evaluation and a specific field of evaluation.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.61-77
• /
• 2017

Although three-dimensional measurement systems for the human body have been studied, there is still an error between the measurements by the two-dimensional measurement method and the three-dimensional scanning method. Especially, in the case of the breast, the outline is not clear. The breast is made up of subcutaneous fat and mammary gland tissue, and it is easy to deform, making it difficult to grasp the exact shape. It is also more difficult to measure photogrammetry or three-dimensional measurement because it is difficult to obtain subjects because of the shame they are reluctant to expose. In this study, the angle and length of the line connecting the measurement points of the breast detail measurement items were compared with the unchanged measurement items such as breast width and center front length using the frontal and lateral photographs taken before and after breast enlargement surgery. The results of the study are as follows. The types of breast before and after surgery were classified into two groups and showed high accuracy rate. Therefore, it was possible to classify the breast type using the frontal and lateral views of the breast, and it was found that The PRM method can distinguish the characteristics of the breast type. Therefore, it can be useful for classifying and discriminating breast types.

• Journal of the Korean Society of Costume
• /
• v.53 no.5
• /
• pp.1-12
• /
• 2003

This paper proposes a system for measuring the 3D human bodies using the multiple 2D images. The system establishes the multiple image input circumstance from the digital camera for image measurement. The algorithm considering perspective projection leads us to estimate the 3D human bodies from the multiple 2D images such as frontal. side and rear views. The results of the image measurement is compared those of the direct measurement and the 3D scanner for the total 40 items (12 heights, 15 widths and 13 depths). Three persons measure the 40 items using the three measurement methods. In comparison of the results obtained among the measurement methods and the persons, the results between the image measurement and the 3D scanner are very similar. However, the errors for the direct measurement are relatively larger than those between the image measurement and the 3D scanner. For example, the maximum errors between the image measurement and the 3D scanner are 0.41cm in height, 0.39cm in width and 0.95cm in depth. The errors are acceptable in body measurement. Performance of the image measurement is superior to the direct. because the algorithm estimates the 3D positions using the perspective projection. In above comparison, the image measurement is expected as a new method for measuring the 3D body, since it has the various advantages of the direct measurement and 3D scanner in performance for measurement as well as in the devices, cost, Portability and man power.