• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.211-219
• /
• 2006

The UET(ultrasound excited thermography) for the ,eat-time diagnostics of the object employs an infrared camera to image defects of the surface and subsurface which are locally heated using high-frequency putted ultrasonic excitation. The dissipation of high-power ultrasonic energy around the feces of the defects causes an increase In temperature. The defect's image appears as a hot spot (bright IR source) within a dark background field. The UET for nondestructive diagnostic and evaluation is based on the image analysis of the hot spot as a local response to ultrasonic excited heat deposition. In this paper the applicability of VET for fast imaging of defect is described. The ultrasonic energy is injected into the sample through a transducer in the vertical and horizontal directions respectively. The voltage applied to the transducer is measured by digital oscilloscope, and the waveform are compared. Measurements were performed on four kinds of materials: SUS fatigue crack specimen(thickness 14mm), PCB plate(1.8 mm), CFRP plate(3 mm) and Inconel 600 plate (1 mm). A high power ultrasonic energy with pulse durations of 250ms Is injected into the samples in the horizontal and vertical directions respectively The obtained experimental result reveals that the dissipation loss of the ultrasonic energy In the vertical injection is less than that in the horizontal direction. In the cafe or PCB, CFRP, the size of hot spot in the vortical injection if larger than that in horizontal direction. Duration time of the hot spot in the vertical direction is three times as long as that in the horizontal direction. In the case of Inconel 600 plate and SUS sample, the hot spot in the horizontal injection was detected faster than that in the vertical direction

• Korean Journal of Ecology and Environment
• /
• v.35 no.3 s.99
• /
• pp.160-171
• /
• 2002

The impact of summer monsoon on water quality of the lower Nakdong River was evaluated during the summer (June-August) in 1997. Several limnological variables were measured in the interval of $1{\sim}3$ day using an automatic monitoring system (Hydrolab $Recorder^{TM}$) to detect water quality changes caused by rainfall on onehour basis. During the monsoon period (from late June to mid July), 5 times of major rainfall events of >50 mm were recorded in the river basin. Dynamic changes of water quality were observed during the monsoon, and the first rainfall event (June$25{\sim}27$) had a significant influence on the water quality at the lower part of the river. All Parameters were largely changed due to the first rain event, and the changed level was maintained until the end of monsoon period. Nutrient concentrations and turbidity increased and values of the other parameters were declined as a result of water dilution. This rainfall event, Changma, is a meteorological phenomenon caused by the East-Asian monsoon climate. The magnitude and frequency of the rainfall during the early monsoon play an important role in change of water quality and ecosystem characteristics of large river systems.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.2
• /
• pp.119-123
• /
• 2004

Purpose: The purpose of this study is to check the range of motion of shoulder and inverstigate the frequencies and patterns of partial thickness rotator cuff tear in SLAP lesions. Materials and Methods: Forty-six patients, forty-seven cases who had SLAP lesions at shoulder arthroscopy were analyzed spectively using the medical records, intra-operative arthroscopic photo & video for SLAP lesions and rotator cuff articular side partial tear. Under the interscalene anesthesia, the range of notion of foreward elevation, internal rotation and external rotation was measured on fixed scapula and 90 degree abduction of the shoulder. Results: The rang of Motion are 150 degree on foreward elevation, 65.5 degree on external rotation, 61.7 degree on internal rotation. By Snyder's classification, type ll SLAP lesion is noted in 24 cases (five cases in type 1, one case in type IV). Rotator cuff articular side partial tear is noted in 24 cases ( one case in type I, 22 cases in type II, one case in type IV SLAP). All the rotator cuff articular side partial thickness tear were located in the anterior part of the supraspinatus. Conclusion: The rotator cuff partial thickness tear is mostly noted on the articular side and frequently found in the relatively more unstable type of SLAP lesions. So we consider that SLAP lesion may be a one of the causes for partial tear of the rotator cuff articular side.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.25-30
• /
• 1998

Time-lapse crosswell seismic data, recorded before and after the cavity filling, showed that the filling increased the velocity at a known cavity zone in an old mine site in Inchon area. The seismic response depicted on the tomogram and in conjunction with the geologic data from drillings imply that the size of the cavity may be either small or filled by debris. In this study, I attempted to evaluate the filling effect by analyzing velocity measured from the time-lapse tomograms. The data acquired by a downhole airgun and 24-channel hydrophone system revealed that there exists measurable amounts of source statics. I presented a methodology to estimate the source statics. The procedure for this method is: 1) examine the source firing-time for each source, and remove the effect of irregular firing time, and 2) estimate the residual statics caused by inaccurate source positioning. This proposed multi-step inversion may reduce high frequency numerical noise and enhance the resolution at the zone of interest. The multi-step inversion with different starting models successfully shows the subtle velocity changes at the small cavity zone. The inversion procedure is: 1) conduct an inversion using regular sized cells, and generate an image of gross velocity structure by applying a 2-D median filter on the resulting tomogram, and 2) construct the starting velocity model by modifying the final velocity model from the first phase. The model was modified so that the zone of interest consists of small-sized grids. The final velocity model developed from the baseline survey was as a starting velocity model on the monitor inversion. Since we expected a velocity change only in the cavity zone, in the monitor inversion, we can significantly reduce the number of model parameters by fixing the model out-side the cavity zone equal to the baseline model.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.1
• /
• pp.66-73
• /
• 2016

Objectives : The purpose of this study was to investigate the characteristics of psychosocial factors related to functional dyspepsia(FD) and their effects on quality of life(QOL) in firefighters. Methods : This study examined data collected from 1,217 firefighters. We measured psychological symptoms by Patient Health Questionnaire-9(PHQ-9), Generalized Anxiety Disorder questionnaire(GAD-7), Korean Occupational Stress Scale(KOSS), Ways of Coping checklist(WCCL), Rosenberg's Self-Esteem Scale(RSES) and World Health Organization Quality of Life Scale abbreviated version(WHOQOL-BREF). Chi-square test, independent t-test, Pearson's correlation test, logistic regression analysis, and hierarchical regression analysis were used as statistical analysis methods. Results : For the group with FD, the male participants showed significantly higher frequency(p=0.006) compared to the female participants. The group with FD had higher scores for depressive symptoms(p<.001), anxiety (p<.001), and occupational stress(p<.001), and did lower scores for self-esteem(p=.008), quality of life(p<.001) than those without FD. The FD risk was higher in the following KOSS subcategories: job demand(OR 1.94, 95% CI : 1.29-2.93), lack of reward(OR 2.47, 95% CI : 1.61-3.81), and occupational climate(OR 1.51, 95% CI : 1.01-2.24). In the hierarchical regression analysis, QOL was best predicted by depressive symptoms, self-esteem, and occupational stress. Three predictive variables above accounts for 42.0% variance explained of total variance. Conclusions : The psychosocial factors showed significant effects on FD, and predictive variables for QOL were identified based on regression analysis. The results suggest that the psychiatric approach should be accompanied with medical approach in future FD assessment.

• 한국체육학회지인문사회과학편
• /
• v.56 no.4
• /
• pp.575-584
• /
• 2017

The purpose of this study was to examine the effects of low intensity resistance training speed on body composition, muscle activity and muscle strength in obese middle-aged women. The subjects (n = 12) were randomly assigned to normal resistance training speed group (NSG, n = 6) and slow resistance training speed group (SSG, n = 6). NSG was performed the for 3 sets ${\times}$ 35 times and total 3-s per repetition (eccentric: 1-s, isometric: 1-s, concentric: 1-s), and SSG performed for 3 sets ${\times}$ 15 times and total 7-s per repetition (eccentric: 3-s, isometric: 1-s, concentric: 3-s). Both groups performed the low intensity resistance training at 30% of 1-RM for 105-s per set, rest for 1 min between sets, rest for 3 min between exercises, and 2~3 times per week, for 4 weeks. The body composition, muscle activity and muscle strength were measured before and 4 week after resistance training. WHR at NSG and body fat at SSG were significantly decreased after resistance training compared with before (P<.05). Ｍuscle activity of biceps brachii, vastus medialis and vastus lateralis at both groups were significantly decreased after resistance training compared with before (P<.05, P<.01). Muscle strength of biceps curl and leg extension at both groups were significantly increased after resistance training compared with before (P<.01). However, body composition, muscle activity and muscle strength did not show statistically significant differences between the groups. Our results suggest that body composition, muscle activity and muscle strength should closely related to the performance time of resistance training (development time of muscle contraction), rather than resistance training speed (repetition frequency).

• Journal of dental hygiene science
• /
• v.18 no.6
• /
• pp.327-339
• /
• 2018

This study aimed to provide basic data for establishing the clinical basis for dental hygienist-led dental hygiene process of care by identifying multiple risk factors for self-support program participants in Gangneung city; we also compared oral health status and behavioral changes through customized oral health care. Four dental hygienists who were evaluated for degree of conformity provided dental hygiene process of care to eight self-support program participants who were selected as having an oral health risk among people in the self-support center. The clinical indicators measured during dental hygiene assessment and evaluation and behavioral changes due to dental hygiene intervention were compared and analyzed. With respect to clinical indicators, at the time of probe, the retention rate of patients with gingival bleeding decreased from 61.4% to 14.7% after intervention (p=0.004). Furthermore, the retention rate of patients with a periodontal pocket >4 mm decreased from 15.6% to 5.8% (p=0.001). The average modified O'Leary index of the patients improved from 23 to 40 (p=0.002). Previously, all eight subjects used the vertical or horizontal method of brushing; after dental hygiene care interventions regarding method and frequency of toothbrushing, use of oral care products, and individual interventions, they started using the rolling or Bass method of toothbrushing. Four of eight subjects reported using interdental toothbrushes after intervention. As a result of applying the change model to the transtheoretical behavior change of the subject, the result of strengthening the health behavior was confirmed. For promotion of oral health by the prevention-centered incremental oral health care system, dental hygienist-led dental hygiene management and maintenance is essential. It is thought that continuous research, such as for feasibility evaluation, cost benefit analysis, and preparation of legal systems, is needed to establish and activate dental hygiene management.