• Title/Summary/Keyword: Meandering line

Search Result 23, Processing Time 0.025 seconds

A 20-GHz Miniaturized Ring Hybrid Circuit Using TFMS on Low-Resistivity Silicon

  • Lee Sang-No;Lee Joon-Ik;Yook Jong-Gwan;Kim Yong-Jun
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • v.5C no.2
    • /
    • pp.76-80
    • /
    • 2005
  • In this paper, a miniaturized ring hybrid circuit is characterized based on a thin film microstrip (TFMS) on low-resistivity silicon. In order to obtain low-loss characteristics, a polyimide layer with 50 $\mu$m thickness is spin-coated onto the silicon to be used for the substrate. First, propagation characteristics of TFMS lines consisting of the ring hybrid circuit are presented. Then, a ring hybrid circuit based on TFMS is featured by employing the triple concentric circle approach for miniaturization. Triple concentric circle lines with $\lambda$$_{g}$/4 or 3$\lambda$$_{g}$/4 line lengths are implemented on the surface of the polyimide by circularly meandering to reduce the circuit size of the designed ring hybrid. Good agreement between measured and simulated results is obtained.

A Study on the Characteristics of Channel Line (유심특성에 관한 연구)

  • Mun, Su-Nam;Lee, Jong-Nam
    • Journal of Korea Water Resources Association
    • /
    • v.30 no.1
    • /
    • pp.15-22
    • /
    • 1997
  • The flow in meandering channel has a great influence on curved bank revetment in river morphology. It is difficult to state generalized cirteria for channel improvement applicable to any paricular river. But it is very important to provide some principles and guidelines for design engineers. The objective of this experimental study in fixed bed model is to povide effective data that find out maximum velocity size by the mean velocity and the radius of curvature in curved channel, for the purpose of improving small stream without hydraulic modeling test each time.

  • PDF

NUMERICAL MODELING OF TWO-DIMENSIONAL ADVECTION-DISPERSION IN OPEN CHANNEL

  • Lee, Myung-Eun;Kim, Young-Han;Seo, Il-Won
    • Water Engineering Research
    • /
    • v.4 no.1
    • /
    • pp.45-58
    • /
    • 2003
  • Two-dimensional depth-averaged advection-dispersion equation was simulated using FEM. In the straight rectangular channel, the advection-dispersion processes are simulated so that these results can be compared with analyti-cal solutions for the transverse line injection and the point injection. In the straight domain the standard Galerkin method with the linear basis function is found to be inadequate to the advection-dispersion analysis compared to the upwind finite element scheme. The experimental data in the S-curved channel were compared with the result by the numerical model using SUPG(Streamline upwind Petrov-Galerkin) method.

  • PDF

The Design of Microstrip Band-Selective Filter with Narrow Stopband for UWB Application (협대역 저지 특성을 가지는 UWB용 마이크로스트립 필터 설계)

  • Roh, Yang-Woon;Hong, Seok-Jin;Jung, Kyung-Ho;Jung, Ji-Hak;Choi, Jae-Hoon
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2005.11a
    • /
    • pp.7-12
    • /
    • 2005
  • A compact microstrip band-selective filter for ultra-wideband (UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator bandstop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band (3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is 29% reduction in footprint compared to the traditional bandstop filter using L-shaped resonators. The measured results show that the filter has a wide passband of 146.7 % (2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of 7.42 % (5.32 GHz to 5.73 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

  • PDF

Characteristics of a Warm Eddy Observed in the Ulleung Basin in July 2005

  • Shin, Chang-Woong
    • Ocean and Polar Research
    • /
    • v.31 no.4
    • /
    • pp.283-296
    • /
    • 2009
  • Oceanographic survey data were analyzed to understand the characteristics of a warm eddy observed in the Ulleung Basin in July 2005. The temperature distribution at 200 db and vertical sections provided evidence of the warm eddy in the Ulleung Basin (UWE05). Based on the 5$^{\circ}C$ isothermal line on 200 db temperature, the major axis was 160 km from southwest to northeast, and the minor axis was 80 km from southeast to northwest. The homogeneous layer in the thermocline of UWE05 had mean values of 10.40$^{\circ}C$ potential temperature, 34.35 psu salinity, and 26.37 kg/m$^3$ potential density (${\sigma}_{\theta}$) and provided evidence that UWE05 also existed during the winter of 2004-2005. A warm streamer initially flowed along the circumference of UWE05 and mixed with the upper central water. Two northward current cores were found on the western side of the measured current section at the central latitude of UWE05. One was the East Korean Warm Current (EKWC) and the other was the main stream of the western part of UWE05. Geostrophic transport of the upper layer (from the surface to the isopycnal surface of 26.9 ${\sigma}_{\theta}$) was approximately 2.5 Sv in the eastern side of UWE05. However, the measured transport was twice as large as the geostrophic transport. Mass conservation of geostrophic transport was well satisfied in the upper layer. The direct current measurements and geostrophic transport analysis showed that the EKWC meandered around UWE05.

An MMIC Doubly Balanced Resistive Mixer with a Compact IF Balun (소형 IF 발룬이 내장된 MMIC 이중 평형 저항성 혼합기)

  • Jeong, Jin-Cheol;Yom, In-Bok;Yeom, Kyung-Whan
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.12
    • /
    • pp.1350-1359
    • /
    • 2008
  • This paper presents a wideband doubly balanced resistive mixer fabricated using $0.5{\mu}m$ GaAs p-HEMT process. Three baluns are employed in the mixer. LO and RF baluns operating over an 8 to 20 GHz range were implemented with Marchand baluns. In order to reduce chip size, the Marchand baluns were realized by the meandering multicoupled line and inductor lines were inserted to compensate for the meandering effect. IF balun was implemented through a DC-coupled differential amplifier. The size of IF balun is $0.3{\times}0.5\;mm^2$ and the measured amplitude and phase unbalances were less than 1 dB and $5^{\circ}$, respectively from DC to 7 GHz. The mixer is $1.7{\times}1.8\;mm^2$ in size, has a conversion loss of 5 to 11 dB, and an output third order intercept(OIP3) of +10 to +15 dBm at 16 dBm LO power for the operating bandwidth.

A study on the bedrock erosional forms at Dutayeon, Yanggu (양구 두타연 인근 지역의 기반암 하상지형 연구)

  • KIM, Jong Yeon;KIM, Chang Hwan
    • Journal of The Geomorphological Association of Korea
    • /
    • v.19 no.2
    • /
    • pp.31-49
    • /
    • 2012
  • Satae cheon, a tributary of the Suip cheon in Yanggu, Gangwon province, is an international river extended to North Korea. Most of drainage basin area of the river was the fierce battle field during the Korean War(1950-1953) and hard to access as it located between the MDL(Military Demarcation Line) and the CCZ(Civilian Control Zone: about 10km south from MDL). By the restriction of access to the sites, most of natural landscape have been well conserved except limited use for military activities. Even the landfoms in that area were not studied, except the government's heritage reports. Satae Cheon's channel follows the Imdang fault line(N-S) to Satae-ri and flow to west to the Dutayeon area. The river meanders along geological structure or weak line at the Dutayeon area. The meandering channel was shorten by the meander cut which linked the thalweg line of meander loop ant the meander neck. As a result of this cut, the river cliff formed by the Satae cheon became the part of newly formed channel bed and the S-forms are formed. After the channel route stabilized, channel incised the rock with large potholes and undulating walls were formed. The channel width changes from 1m to 10m with restriction of the undulating walls, so this part can be regarded as inner channel or inner gorge. From the point of planar forms it also can be slot-type canyon.

Analysis of Turbulent Flow by Location Characteristics of Side Weir inlet in Meandering Channels (사행수로 구간의 횡월류위어 유입구 위치특성에 따른 흐름해석)

  • Yu, Chang Hwan;Shin, Jae Sung;Oh, Yeun Kun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.306-306
    • /
    • 2020
  • 횡월류위어(side weir)는 하천의 수위가 한계수위 이상으로 상승할 경우 본류로부터 저류지나 분수로(distributary channel)로 흐름을 전환하기 위하여 사용하는 수공구조물로 강변저류지나 off-line저류지의 유입부에 흐름방향과 평행하게 설치되어 유량관리 및 전환, 홍수통제, 에너지 소산, 수위조절, 일정 유량의 취수 및 분배, 초과 홍수량의 전환 등의 목적으로 이용되는 구조물이다. 횡월류 위어의 월류 흐름은 일반위어와 같이 위어마루부 직각방향으로 흐르지 않고 본류 흐름특성에 따라 비스듬하게 유입된다. 이러한 흐름특성으로 횡월류위어 월류량은 본류의 하폭, 흐름특성, 위어길이 및 설치위치 등에 따라 각기 다르게 산정된다. 현재 국내에서 진행된 횡월류위어 흐름특성에 관련된 연구는 대부분 직선수로에 집중되어 있으며 사행하천의 흐름특성에 따른 연구는 부족한 실정이다. 금회 연구에서는 3차원 상용프로그램인 FLOW-3D를 이용하여 사행하천구간 유입부 설치위치 특성에 따른 횡월류 위어 유입흐름 특성을 분석하였다. 사행하천 구간 횡월류위어 설치위치에 따른 3차원 흐름해석을 위해 AUTO CAD 프로그램을 이용하여 수로길이 30m, 수로폭 2m의 구형 사행수로를 구성하였고, 횡월류위어 유입부 위치를 20°~120°로 변화시키며 수치모형실험을 수행하였다. 해석결과 수로흐름은 유입부 설치각이 작을수록 상·하류 수위차가 작아지며 유속이 감소하며 설치위치각이 클수록 수로내 평균유속은 증가하는 것으로 확인되었다. 유입부 설치각이 작을수록 방류량이 증가하여 수로내 흐름분리현상 증가하였고 이로인한 지체현상이 발생하는 것으로 확인되었다. 본 연구로 사행하천구간에 횡월류위어가 설치된 경우, 월류량과 수리학적 흐름특성을 해석할 때 3차원 수치모형실험이 유용한 해석도구로 이용될 수 있음이 확인되었다. 이후 수치모형실험이 수공구조물 설계 및 해석 시 참고자료로 이용 가능할 것으로 사료된다.

  • PDF

Analysis of Turbulent Flow by Location Characteristics of Side Weir inlet in Meandering Channels (사행수로 구간의 횡월류위어 유입구 위치특성에 따른 흐름해석)

  • Yu, Chang Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.250-250
    • /
    • 2021
  • 횡월류위어(side weir)는 하천의 수위가 한계수위 이상으로 상승할 경우 본류로부터 저류지나 분수로(distributary channel)로 흐름을 전환하기 위하여 사용하는 수공구조물로 강변저류지나 off-line저류지의 유입부에 흐름방향과 평행하게 설치되어 유량관리 및 전환, 홍수통제, 에너지 소산, 수위조절, 일정 유량의 취수 및 분배, 초과 홍수량의 전환 등의 목적으로 이용되는 구조물이다. 횡월류 위어의 월류 흐름은 일반위어와 같이 위어마루부 직각방향으로 흐르지 않고 본류 흐름특성에 따라 비스듬하게 유입된다. 이러한 흐름특성으로 횡월류위어 월류량은 본류의 하폭, 흐름특성, 위어길이 및 설치위치 등에 따라 각기 다르게 산정된다. 현재 국내에서 진행된 횡월류위어 흐름특성에 관련된 연구는 대부분 직선수로에 집중되어 있으며 사행하천의 흐름특성에 따른 연구는 부족한 실정이다. 금회 연구에서는 3차원 상용프로그램인 FLOW-3D를 이용하여 사행하천구간 유입부 설치위치 특성에 따른 횡월류 위어 유입흐름 특성을 분석하였다. 사행하천 구간 횡월류위어 설치위치에 따른 3차원 흐름해석을 위해 AUTO CAD 프로그램을 이용하여 수로길이 30m, 수로폭 2m의 구형 사행수로를 구성하였고, 횡월류위어 유입부 위치를 20°~120°로 변화시키며 수치모형실험을 수행하였다. 해석결과 수로흐름은 유입부 설치각이 작을수록 상·하류 수위차가 작아지며 유속이 감소하며 설치위치각이 클수록 수로내 평균유속은 증가하는 것으로 확인되었다. 유입부 설치각이 작을수록 방류량이 증가하여 수로내 흐름분리현상 증가하였고 이로인한 지체현상이 발생하는 것으로 확인되었다. 본 연구로 사행하천구간에 횡월류위어가 설치된 경우, 월류량과 수리학적 흐름특성을 해석할 때 3차원 수치모형실험이 유용한 해석도구로 이용될 수 있음이 확인되었다. 이후 수치모형실험이 수공구조물 설계 및 해석 시 참고자료로 이용가능할 것으로 사료된다.

  • PDF

Design of a Band-Stop Filter for UWB Application (UWB용 대역 저지 필터 설계)

  • Roh Yang-Woon;Hong Seok-Jin;Chung Kyung-Ho;Jung Ji-Hak;Choi Jae-Hoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.2 s.105
    • /
    • pp.89-94
    • /
    • 2006
  • A compact microstrip band-selective filter for ultra-wideband(UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator band-stop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band(3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is $29\;\%$ size reduction in footprint compared to the traditional band-stop filter using L-shaped resonators. The measured results show that the filter has a wide passband of $146.7\;\%$(2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of $10.04\;\%$(5.2 GHz to 5.75 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.