• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1393-1398
• /
• 2004

Image is degraded by several causes such as the process of acquisition, storage and transmission. To restore those images, many researches have been continued. Centrally methods to restore degraded image by AWGN(additive white gaussian noise) a.e mean filter and wiener filter. Especially, mean filter is superior in noise reduction of area that is a small change of luminosity. But mean filter brings about the effect smoothing edge components of the image, because it does'nt consider characteristics of the image. So in this paper we propose an image restoration method compounding respective images adding established weights, after filtering with mean filter and powerful wiener filter in both improvement of contrast and preservation of edge components.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.159-162
• /
• 2008

This paper presents a modified mean curvature diffusion filter to smooth speckle noise in images. Mean curvature diffusion filter has already shown good results in reducing noise in images while preserving fine details. In the mean curvature diffusion, the rate of smoothing is controlled by the local value of the diffusion coefficient chosen to be a function of the local image gradient magnitude. In this paper, the diffusion coefficient is modified to be controlled adaptively by local image surface slope and heterogeneity. The local surface slope contributes to preserving details (e.g.edges) in image and the local surface heterogeneity helps the smoothing filter consider the amount of noise in both edge and non-edge area. The proposed filter's performance is demonstrated by quantitative experiments using speckle noised aerial image and TerraSAR-X satellite image.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.393-396
• /
• 2010

In this paper the process of transmitting images signal restore to image corrupted by impulse noise proposed alpha-trimmed mean filter. the proposed filter first identifies the noise pixels using the morphological noise detector and then removes the detected impulse noise using the alpha-trimmed mean filter. these proposed filter can realize the accurate noise detection and it can remove impulse noise effectively while preserving edge region in the image very well. Through the simulation, we compared with the existing methods and capabilties.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.467-468
• /
• 1998

Impulsive noise appears as black and/or white spots in an image. It is usually caused by errors during the image acquisition or transmission through communication channels. This paper presents a study on the impulsive noise reduction filter of digital image. A much more effective method for removing impulse noise is weighted median filtering. But it loses some information by changing center value with no condition. We propose some new technique to change center value with some conditions. In this paper, the performance of conditional weighted median filter is compared to the commonly used median filter, mean filter, max/min filter, and weighted median filter. A quantitative comparison is performed on MSE (Mean Square Error), RMSE (Root Mean Square Error), and SNR (Signal to Noise Ratio). Proposed conditional weighted median filter can yield better performance than regular filters.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.135-140
• /
• 2013

Noise estimation and detection algorithm to adapt quickly to changing noise environment using the LMS Filter. However, the LMS Filter for noise estimation for a certain period of time and need time to adapt. If the signal changes occur, have the disadvantage of being more adaptive time-consuming. Therefore, noise removal method is proposed to a frame basis AELMS Filter to compensate. In this paper, we split the input signal on a frame basis in noisy environments. Remove the LMS Filter by configuring noise predictions using the mean and variance. Noise, even if the environment changes fast adaptation time to remove the noise. Remove noise and environmental noise and speech input signal is mixed to maintain the unique characteristics of the voice is a way to reduce the damage of voice information. Noise removal method using a frame basis AELMS Filter To evaluate the performance of the noise removal. Experimental results, the attenuation obtained by removing the noise of the changing environment was improved by an average of 6.8dB.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.1048-1060
• /
• 2012

In this paper, an adaptive temporal and spatial filter (ATSF) based on mean square error (MSE) estimation is proposed. ATSF is a block based de-noising algorithm. Each noisy block is selectively filtered by a temporal filter or a spatial filter. Multi-hypothesis motion compensated filter (MHMCF) and bilateral filter are chosen as the temporal filter and the spatial filter, respectively. Although there is no original video, we mathematically derivate a formular to estimate the real MSE between a block de-noised by MHMCF and its original block and a linear model is proposed to estimate the real MSE between a block de-noised by bilateral filter and its original block. Finally, each noisy block is processed by the filter with a smaller estimated MSE. Simulation results show that our proposed algorithm achieves substantial improvements in terms of both visual quality and PSNR as compared with the conventional de-noising algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1379-1382
• /
• 1997

We introduce a fast implementation of the adaptive transversal filter which uses least-mean-square(LMS) algorithm. The fast Hadamard transform(FHT) is used for the implementation of the filter. By using the proposed filter we can get the significant time reduction in computatioin over the conventional time domain LMS filter at the cost of a little performance. By computer simulation, we show the comparison of the propsed Hadamard-domain filter and the time domain filter in the view of multiplication time, mean-square error and robustness for noise.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.33-36
• /
• 1992

In this paper we propose the impulse noise-robust Wiener filter based on a combination of Wiener and modified trimmed mean(MTM) filters. The robust Wiener filter uses the trimming operation of the MTM filter to replace the outliers with the median within the window and the new set of samples which can be considered as the random process with same mean are inputted into the following Wiener filter. We show that the robust Wiener filter is effective in frequency selective filtering of nonstationary signals while preserving signal edges with the rejection of impulse noise.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.187-192
• /
• 2013

Because of the importance of small target detection in infrared images, many studies have been carried out in this area. Using a Kalman filter and mean shift algorithm, this study proposes an algorithm to track multiple small moving targets even in cases of target disappearance and appearance in serial infrared images in an environment with many noises. Difference images, which highlight the background images estimated with a background estimation filter from the original images, have a relatively very bright value, which becomes a candidate target area. Multiple target tracking consists of a Kalman filter section (target position prediction) and candidate target classification section (target selection). The system removes error detection from the detection results of candidate targets in still images and associates targets in serial images. The final target detection locations were revised with the mean shift algorithm to have comparatively low tracking location errors and allow for continuous tracking with standard model updating. In the experiment with actual marine infrared serial images, the proposed system was compared with the Kalman filter method and mean shift algorithm. As a result, the proposed system recorded the lowest tracking location errors and ensured stable tracking with no tracking location diffusion.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.72-80
• /
• 1996

In this paper, variable windowing mean filter to remove speckle noise and a measure to detect thin edge in ultrasonic images are proposed. Because ultrasonic images are corrupted by speckle noise showing a granular appearance, good edge detection is difficult. As a result, noise removing filter is needed in preprocessing stage. The speckle noise removing filter is based on mean filter whose window size is changed by the ratio of standard deviation to mean for image signal and noise signal in local area. And the measure expressed the difference of means between tow windows is used for detecting thin edge in filtered image. Results show that variable windowing mean filter removes speckle noise effectively, and proposed measure is useful in detecting thin edge.