• 한국식품조리과학회지
• /
• 제10권4호
• /
• pp.351-356
• /
• 1994

Comparisions were made for cooking times, internal temperatures, thiamin contents and textural properties of various portion weights of egg mixture cooked in a microwave oven at high and/or low power levels and in a conventional double boiler. The mean internal temperatures of conventionally cooked egg mixtures were 76.4~80.7$^{\circ}C$. When cooking was made by steaming, the mean internal temperature were comparable among samples. With the microwave cooking, the range of mean temperature was 83.8~96.4$^{\circ}C$, and they were significantly higher than the conventionally cooked egg mixtures. The hardness determination was conducted using universal testing machine and a taste panel. Samples cooked with steam or with larger portion weight had softer texture than samples cooked by microwaves or smaller amount, respectively. Mean internal temperature was significantly(r=0.99, p<0.05) correlated with mechanical hardness determination. Statistical analyses indicated no significant difference in the thiamin content among various treatments.

• 대한한방소아과학회지
• /
• 제15권1호
• /
• pp.47-57
• /
• 2001

Heights of children ranged from 91.10 to 144.70 and the mean height rate after the administration of Boyangsungjangtang was significantly greater than that, 0.036, of prepuberty children who are in 50 percentile(One sampled T test, p<0.001). A highly significant difference was observed among three groups, divided according to the duration of taking Boyangsungjangtang(ANOVA, p=0.015). Further analysis(Tukey's Multiple Range test) indicated that the mean height rate of the group taking Boyangsungjangtang for under 3 months was significantly higher than that of both group for 3 to 6 months and group for over 6 months. The mean height rate of the latter two groups were not significantly different.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1406-1409
• /
• 2018

We have frequently encountered the rapid changes that prevalent opinion of the social community is toppled by a new and opposite opinion against the pre-exiting one. To understand this interesting process, mean-field model with infinite-interaction range has been mostly considered in previous studies S. A. Marvel et al., Phys. Rev. Lett. 110, 118702 (2012). However, the mean-field interaction range is lack of reality in the sense that any individual cannot interact with all of the others in the community. Based on it, in the present work, we consider a simple model of opinion consensus so-called basic model on the low-dimensional lattices (d = 1, 2) with finite interaction range. The model consists of four types of subpopulations with different opinions: A, B, AB, and the zealot of A denoted by $A_c$, following the basic model shown in the work by S. A. Marvel et al.. Comparing with their work, we consider the finite range of the interaction, and particularly reconstruct the lattice structure by adding new links when the two individuals have the distance < ${\sigma}$. We explore how the interaction range ${\sigma}$ affects the opinion consensus process on the reconstructed lattice structure. We find that the critical fraction of population for $A_c$ required for the opinion consensus on A shows different behaviors in the small and large interaction ranges. Especially, the critical fraction for $A_c$ increases with the size of ${\sigma}$ in the region of small interaction range, which is counter-intuitive: When the interaction range is increased, not only the number of nodes affected by $A_c$ but also that affected by B grows, which is believed to cause the increasing behavior of the critical fraction for $A_c$. We also present the difference of dynamic process to the opinion consensus between the regions of small and large interaction ranges.

• 대한관절경학회지
• /
• 제2권1호
• /
• pp.33-39
• /
• 1998

This study was done to compare the results of the one-incision technique and the conventional two incision technique for the arthroscopic treatment of the posterior cruciate ligament injury. Fifty-five patients with the posterior cruciate ligament injury underwent the arthroscopic posterior cruciate ligament reconstruction using bone-patellar tendon-bone(BTB) graft. Patients with combined ligament injuries requiring concomitant operative treatment were excluded in this study. The conventional two-incision technique was performed in ten patients(Group I) and the one-incision technique in forty-five patients(Group II). The average duration of follow-up was 45 months in Group I(range, 40 to 50 months) and 36 months in Group II(range, 24 to 68 months). Auto BTB grafts were utilized for all patients in Group I. In Group II, 34 BTB autografts and 11 BTB allografts were utilized. The functional results were evaluated according to the Lysholm Knee Scoring scale and the Hospital for Special Surgery(HSS) knee ligament rating form. The postoperative posterior laxity was measured with a KT 1000 or 2000 arthrometer. Lysholm postoperative mean values were 90.0 in Group I and 90.6 in Group II. HSS mean values were 87.7 in Group I and 92.6 in Group II. HSS postoperative mean value showed better results in Group II(p=0.037). The average side-to-side difference of the posterior translation measured by the KT 2000 arthrometer were 2.10 mm(range, 1 to 4 mm) in Group I and 2.38 mm(range, 0 to 5 mm) in Group II. But there was no statistically significant difference. In Group II, the results of the autograft and allograft showed no significant difference. The arthroscopic posterior cruciate ligament reconstruction using one-incision technique showed good results comparable to the conventional two-incision technique. This technique minimizes potential injury to the extensor mechanism, especially vastus medialis obliquus, and scar formation over the medial femoral condyle. The operation can be finished within one tourniquet time by using only one-incision.

• 한국환경보건학회지
• /
• 제21권1호
• /
• pp.56-67
• /
• 1995

This study was carried out to observe how composting reaction proceed in the optimum composting condition and to understand the characteristics of final compost, when swine feces was amended with different bulking material. Sawdust, rice straw, and rice hull were selected as bulking materials and each of these was mixed with swine feces to obtain the optimum range of moisture contents and C:N ratio. To grasp the influence of newspaper on cornposting reaction when it flew into the composting site intentionally or accidentally, another composting reaction using newspaper as a bulking material was studied. In this experiment, raw material mixes containing the same amount of organic materials were put into 4 composting reactors and composted in the same environmental condition for 3 weeks from Aug. 1, 1994 to Aug. 22, 1994. The followings are the main results of this study. 1. The maximum temperatures reached at during cornposting reaction were 53.8$\circ$C, 51.9$\circ$C, 52.7$\circ$C, and 52.1$\circ$C in the reactor using sawdust, rice straw, rice hull, and newspaper as a bulking material respectively: Thermophilic temperatures were maintained for 72, 108, 108, and 111 hours in each reactor. Mean temperatures of reactors using sawdust, rice straw, rice hull, or newspaper as a bulking materials were 39.7$\circ$C, 39.5$\circ$C, 41.3$\circ$C, and 40.3$\circ$C, but no significant difference between these mean temperatures was observed(p>0.05). Each composter showed significant difference from room temperature(p<0.01), and the mean difference between them was 9.4$\circ$C. 2. Ash contents of each reactor increased rapidly in order of rice straw, rice hull, newspaper, and sawdust according to the pattern of second order function. This rate of increase seemed to result from structural characteristics of a bulking material. The absolute values of second order coefficient of these regression functions were 0.0199, 0.0159, 0.0157, and 0.0144 in each reactor using rice straw, rice hull, newspaper, or sawdust as a bulking material. 3. C:N ratio decreased as the reaction proceeded. Degree of decrease was in order of rice straw, rice hull, newspaper, and sawdust. This sequence was consistent with the increase rate of ash content. The ratios of initial C:N ratio to final C:N ratio were 0.45, 0.53, 0.64, and 0.75 in each reactor using rice straw, rice hull, newspaper, and sawdust as a bulking material respectively. From this ratios, it was possible to infer that all the composting reactions were completed. 4. Fertilizer content containing in the final compost was 1.61~2.20% of N, and 0.35~0.54% of P in dry weight base. According to the classification standard for compost constituent by Higgins, all composts had the intermediate grade of N, but below the low grade of P excepting the newspaper amended compost(fall into the range of the low grade). 5. Heavy metal contents contained in the composts were analyzed. In case of Cd, the range of 0.58~1.11 $\mu$g/g was observed, and in case of Pb, the range of 24.76~39.53 $\mu$g/g was observed(in wet weight base). These values are below the permissible heavy metal level for compost of foreign countries.

• Journal of Preventive Medicine and Public Health
• /
• 제26권3호
• /
• pp.371-386
• /
• 1993

This study was carried out to evaluate diagnostic criteria of noise-induced hearing loss (NIHL) among-workers in an iron foundry. Of 1,093 workers under the observation of noise-specific health examination, 184 workers were selected by way of first and second screening audiometric examination. A questionnaire survey, otological examinations, Rinne test and audiometric test were performed and the results were as follows ; The degree of hearing impairment in the left ear was more severe than in the right ear (p<0.05). The difference between hearing threshold of the first and the second hearing test at 1,000 Hz was about 5 dB with a narrow range of deviations while the difference at 4,000 Hz was about -7 dB with a wide range. Of the total study workers, 84.8% were tested within 15 hours away from noise exposure, and the rest after 16 hours. This study has identified that mean hearing loss at 4,000 Hz showed a significant statistical difference among the two study groups while mean hearing loss by 4-divided classification did not. The same phenomena were observed between the group with and without tinnitus and between the group with and without difficulty in hearing (p<0.05). Among 184 workers, 10 workers (5.4%) diagnosed as NIHL by old diagnostic criteria in contrast to 150 workers diagnosed as NIHL by the new diagnostic criteria. There was a significant difference between the two groups in the average hearing loss at 4,000 Hz and 4-divided classification (p<0.01), but there were no significant differences in age, the duration of employment, blood pressure and the duration wearing the personal hearing protector (p>0.05). If we apply Early Loss Index (ELI) method, some workers in younger age group diagnosed as NIHL by the new diagnostic criteria were fallen into within the normal range. In the mean time older age group show reverse results in contrast to the above finding. It is too early to confirm the value of the usage of the new diagnostic criteria in hearing examination. Further study is called for to verify the value of this criteria.

• 대한족부족관절학회지
• /
• 제20권4호
• /
• pp.152-157
• /
• 2016

Purpose: To evaluate the effect of shortening scarf osteotomy on pain relief and range of motion (ROM) of the first metatarsophalangeal joint in hallux rigidus patients. Materials and Methods: Twenty-three cases of 19 patients who had been treated with shortening scarf osteotomy for the hallux rigidus between January 2007 and December 2013 were reviewed. The mean follow-up period was 21.4 months, and the mean age was 59.2 years. The first metatarsal bone was shortened until the ROM of the first metatarsophalangeal joint was greater than $80^{\circ}$ or $40^{\circ}$ of dorsiflexion. The length shortened by scarf osteotomy was measured. The authors also measured and compared the joint interval difference of the standing foot using an anteroposterior radiography. Moreover, the difference of ROM of the first metatarsophalangeal joint between the preoperative and final follow-up periods was also compared. The clinical results were evaluated and compared using the American Orthopaedic Foot and Ankle Society (AOFAS) scoring system and visual analogue scale (VAS) score. Results: The mean shortening length was about 6.5 mm (range, 4~9 mm). The joint space has been increased to 1.8 mm, and the ROM of the first metatarsophalangeal joint has also been increased to $18.4^{\circ}$ after the operation. In three cases, the postoperative ROM has been decreased to less $10^{\circ}$. The AOFAS score has been improved from 41.7 (range, 32~55) to 86.2 (range, 65~95), and the VAS score was also decreased from 3.7 (range, 3~5) to 1.3 (range, 0~3). Two cases have shown no decrease in pain even after the operation. Conclusion: Shortening scarf osteotomy was found to decrease joint pain by decompressing the pressure of the first metatarsophalangeal joint. This osteotomy also helped improve the ROM of the first metatarsophalangeal joint. Shortening scarf osteotomy can be considered one of the effective methods for joint preservation.

• 대한치과기공학회지
• /
• 제35권3호
• /
• pp.193-200
• /
• 2013

Purpose: In this study, in order to provide objective standard of the mixed concentration of the zirconia coloring-liquids, compare the shade differences after colored zirconia blocks from different concentrations. Methods: After immersion for 2 minutes zirconia specimen ($1.5{\times}1.5{\times}0.6{\pm}0.01mm$) in coloring-liquids that produced different concentrations, were sintered in furnace dedicated. Then, it was measured in spectrophotometer and Shadepilot. It has been determined mean and standard deviation of the color difference for each group, and verified by one-way ANOVA using the (version12.0) SPSS WIN Program the difference in shade according to the concentration at the significance level of 95% confidence, it conducted a Tukey's multiple range test to post-test. Results: The mean of $L^*$ was decreased toward LN35 group, however the mean of $a^*$ and $b^*$ was increased(p<.05). There is a statistically significant difference in the results of $L^*$ post hoc test of each group was LN15-LN30/LN35, LN20-LN30/LN35, LN25-LN30/LN35, and LN30-LN35 group. The $a^*$ group, it was found that there is a statistically significant difference in all groups for each(p<.05). The $b^*$ group, it was found that there is a statistically significant difference in all groups except the LN25-LN30(p<.05). Conclusion: In order to make effective use of the coloring-liquids of zirconia, the device objective, accurate concentration measurement is required, from the present study, we presented evidence basic to this.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.

• 대한물리치료과학회지
• /
• 제8권1호
• /
• pp.893-906
• /
• 2001

The purposes of this study were to compare pelvic tilt. range of motion(ROM) of hip rotation, and leg length difference before and after manipulation and to investigate correlation between changes of each variables after manipulation of sacroiliac pint in 31 low back pain patients(11 males, 20 females) with sacroiliac pint dysfunction. The sacroiliac pint of patients was manipulated on the side of anterior pelvic tilt, using the technique described by Stoddard(1962) and Greenmann (1996). I used this technique because it usually eliminated sacroiliac Pint dysfunction in one treatment session. SPSS for window computer system was used to analyze the data. Also t-test was performed for comparison of the variables before and after manipulation, and Pearson product-moment correlation analysis and regression analysis were performed for changes of each variables after manipulation. The result were as follows: 1. The pelvic tilt after manipulation was significantly decreased(mean=$2.79^{\circ}$) compared with the pelvic tilt before manipulation(p=.001). 2. The PROM of hip internal rotation ipsilateral to anterior pelvic tilt after manipulation significantly decreased (mean = $1.88^{\circ}$) compared with hip internal rotation before manipulation (p=.008). The PROM of hip internal rotation ipsilateral to posterior pelvic tilt after manipulation significantly increased(mean = $1.29^{\circ}$) compared with hip internal rotation before manipulation (p=.029). 3. The PROM of hip external rotation ipsilateral to anterior pelvic tilt after manipulation significantly increased(mean=$2.42^{\circ}$) compared with the hip external rotation before manipulation(p=$2.42^{\circ}$) compared with the hip external rotation ipsilateral to posterior pelvic tilt after manipulation significantly decreased(mean = $1.84^{\circ}$) compared with the hip external rotation before manipulation (p=.008). 4. Leg length difference after manipulation significantly decreased(mean=2.15 mm) compared with leg length difference before manipulation (p=.008). Regression analysis revealed that a fair correlation was found between change in leg length difference and change in anterior pelvic tilt after manipulation(p=.009). 5. Pearson product-moment correlation coefficient was used to assess differences of the variables after manipulation. A fair correlation was found between change in leg length difference and change in anterior pelvic tilt after manipulation(r=.462, p<.01). A fair correlation was found between change in anterior pelvic tilt and change in hip internal rotation ipsilateral to anterior pelvic tilt(r=.397, p<.05) and between change in anterior pelvic tilt and change in hip external rotation ipsilateral to anterior pelvic tilt(r=.516, p<.01). A fair correlation was found between change in posterior pelvic tilt and changes in hip internal rotation ipsilateral to posterior pelvic tilt (r=.441, p<.05) and between change in posterior pelvic tilt and change in hip external rotation ipsilateral to posterior pelvic tilt(r=.361, p<.05). A fair correlation was found between change in hip internal rotation ipsilateral to anterior pelvic tilt and change in hip external rotation ipsilateral to posterior pelvic tilt(r=.388, p<.05) and between change in hip internal rotation ipsilateral to posterior pelvic tilt and change in hip internal rotation ipsilateral to anterior pelvic tilt(r=.426. p<.05).