• 제목/요약/키워드: Mean Load

검색결과 975건 처리시간 0.031초

Statistical properties of the maximum elastoplastic story drift of steel frames subjected to earthquake load

  • Li, Gang
    • Steel and Composite Structures
    • /
    • 제3권3호
    • /
    • pp.185-198
    • /
    • 2003
  • The concept of performance based seismic design has been gradually accepted by the earthquake engineering profession recently, in which the cost-effectiveness criterion is one of the most important principles and more attention is paid to the structural performance at the inelastic stage. Since there are many uncertainties in seismic design, reliability analysis is a major task in performance based seismic design. However, structural reliability analysis may be very costly and time consuming because the limit state function is usually a highly nonlinear implicit function with respect to the basic design variables, especially for the complex large-scale structures for dynamic and nonlinear analysis. Understanding statistical properties of the structural inelastic deformation, which is the aim of the present paper, is helpful to develop an efficient approximate approach of reliability analysis. The present paper studies the statistical properties of the maximum elastoplastic story drift of steel frames subjected to earthquake load. The randomness of earthquake load, dead load, live load, steel elastic modulus, yield strength and structural member dimensions are considered. Possible probability distributions for the maximum story are evaluated using K-S test. The results show that the choice of the probability distribution for the maximum elastoplastic story drift of steel frames is related to the mean value of the maximum elastoplastic story drift. When the mean drift is small (less than 0.3%), an extreme value type I distribution is the best choice. However, for large drifts (more than 0.35%), an extreme value type II distribution is best.

지각부담효과에 미치는 정서의 영향: ERP 연구 (The Affective Influences on Perceptual Load Effect: An Event-related Potential Study)

  • 박태진;김정희
    • 인지과학
    • /
    • 제23권2호
    • /
    • pp.165-184
    • /
    • 2012
  • 주의를 기울이지 않은 배경자극의 정서가가 표적자극의 지각처리에 미치는 영향을 알아보기 위해 정서적 그림자극(IAPS) 위에 6개 글자들을 함께 제시하고서 실험참가자들에게 특정 글자를 탐지하도록 요구하였다. 글자탐지의 난이도를 달리하여 지각부담을 조작하였는데, 정확율과 반응시간 모두에서 저부담조건이 고부담조건보다 빠르고 정확하였다. ERP 분석 결과, 정서자극 없이 글자탐지만 수행한 통제조건의 경우 후측 시각영역에서 P1과 N1 성분에서 지각부담효과가 관찰되었다. 실험조건에서는 정서가와 지각부담의 상호작용이 후측 시각영역의 N1에서 관찰되었는데, 특히 중립정서보다 부정정서에서 고부담조건과 저부담조건간 진폭 차이가 더 크게 나타났다. 배경자극이 부정적인 경우 중립적인 경우보다 주의용량을 더 소모함으로써 지각부담효과가 더 컸던 것으로 판단되는데, 이는 주의집중 받지 않은 정서자극이 자동적으로 처리되어 표적자극의 초기 지각처리에 영향을 미친다는 것을 시사한다.

  • PDF

Updates of Korean Design Standard (KDS) on the wind load assessment and performance-based wind design

  • Han Sol Lee;Seung Yong Jeong;Thomas H.-K. Kang
    • Wind and Structures
    • /
    • 제37권2호
    • /
    • pp.117-131
    • /
    • 2023
  • Korea Design Standard (KDS) will be updated with two major revisions on the assessment of wind load and performance-based wind design (PBWD). Major changes on the wind load assessment are the wind load factor and basic wind speed. Wind load factor in KDS is reduced from 1.3 to 1, and mean recurrence interval (MRI) for basic wind speed increases from 100 years to 500 years considering the reduction of wind load factor. Additional modification is made including pressure coefficient, torsional moment coefficient and spectrum, and aeroelastic instability. Combined effect of the updates of KDS code on the assessment of wind load is discussed with the case study on the specified sites and building. PBWD is newly added in KDS code to consider the cases with various target performance, vortex-induced vibration, aeroelastic instability, or inelastic behavior. Proposed methods and target performance for PBWD in KDS code are introduced.

Efficacy of Poly-Gamma-Glutamic Acid in Women with High-Risk Human Papillomavirus-Positive Vaginal Intraepithelial Neoplasia: an Observational Pilot Study

  • Koo, Yu-Jin;Min, Kyung-Jin;Hong, Jin-Hwa;Lee, Jae-Kwan
    • Journal of Microbiology and Biotechnology
    • /
    • 제25권7호
    • /
    • pp.1163-1169
    • /
    • 2015
  • Poly-gamma-glutamic acid (γ-PGA) is a natural polymer that is synthesized by Bacillus species and has been reported to have antitumor activity. The aim of this study was to investigate the effect of γ-PGA on the treatment of vaginal intraepithelial neoplasia (VAIN). A retrospective observational study on γ-PGA therapy for biopsy-proven VAIN was conducted. The efficacy was assessed by evaluating the results of Pap cytology and the viral load of high-risk HPV at three time points: at enrollment, and at the first and second post-treatment visits. Of 17 patients treated with γ-PGA, only 12 patients who had a high-risk HPV infection were included in the analysis. Histology was VAIN1 in seven patients, VAIN2 in two patients, and VAIN3 in three patients. γ-PGA was administered for newly diagnosed VAIN in five (41.7%) patients and persistent VAIN in seven (58.3%) patients for the mean time of 4.5 months. At the first and second post-treatment visits, cytological regression was observed in five (41.7%) and six (50%) patients, respectively. Regarding the HPV load, the overall response rate was 66.7%, and the mean level was 670.6 ± 292.5 RLU at the first follow-up, which was lower than the initial viral load of 1,494.8 ± 434.5 RLU (p = 0.084). At the second follow-up, the overall response rate was 58.3%, and the mean viral load level was 924.2 ± 493.7 RLU. γ-PGA may be helpful for the cytological regression and reduction of viral load in patients with high-risk HPV-positive VAIN, suggesting that γ-PGA is a promising treatment option for primary or persistent VAIN.

평균장 어닐링과 유전자 알고리즘을 결합한 부하균형기법 (A Load Balancing Technique Combined with Mean-Field Annealing and Genetic Algorithms)

  • 홍철의;박경모
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제33권8호
    • /
    • pp.486-494
    • /
    • 2006
  • 본 논문에서는 병렬처리에서 중요한 이슈인 부하균형 문제에 대한 새로운 솔루션을 소개한다. 솔루션으로 제안하는 MGA 기법은 평균장 어닐링 (MFA)과 유전자 알고리즘 (GA)의 장점을 효과적으로 결합한 휴리스틱 부하균형기법이다. 제안된 MGA을 다른 매핑 알고리즘 (MFA, GA-l, GA-2) 들과의 성능 향상비를 측정하는 멀티프로세서 매핑 시뮬레이션을 개발하였다. 휴리스틱 매핑 기법의 합성을 통하여 기존의 방법보다 수행시간은 오래 걸리는 대신 솔루션 품질, 즉 최대종료시간 및 통신부하에서 개선된 실험 결과를 얻을 수 있다는 것을 보였다.

Geospatial analysis of wind velocity to determine wind loading on transmission tower

  • Hamzah, Nur H.;Usman, Fathoni
    • Wind and Structures
    • /
    • 제28권6호
    • /
    • pp.381-388
    • /
    • 2019
  • This paper described the application of Geospatial Analysis in determining mean wind speed, $V_h$ for wind load calculation imposed to electrical transmission tower structural design. The basic wind speed data on available station obtained from Malaysian Meteorology Department is adjusted by considering terrain and ground roughness factor. The correlation between basic wind speed, terrain factor and ground roughness stated in EN-50341-1 is used to obtain the $V_h$ for overhead transmission line elements 50 m above ground. Terrain factor, $k_r$ and ground roughness, $z_0$ in this study are presented by land use types of study area. Wind load is then calculated by using equation stated in design code EN-50341-1 by using the adjusted mean wind speed. Scatter plots of $V_h$ for different $k_r$and $z_0$ are presented in this paper to see the effect of these parameters to the value of $V_h$. Geospatial analysis is used to represent the model of $V_h$. This model can be used to determine possible area that will subject to wind load which severe to the stability of transmission tower and transmission line.

Incremental Damage Mechanics of Particle or Short-Fiber Reinforced Composites Including Cracking Damage

  • Cho, Young-Tae
    • Journal of Mechanical Science and Technology
    • /
    • 제16권2호
    • /
    • pp.192-202
    • /
    • 2002
  • In particle or short-fiber reinforced composites, cracking of the reinforcements is a significant damage mode because the cracked reinforcements lose load carrying capacity. This paper deals with an incremental damage theory of particle or short-fiber reinforced composites. The composite undergoing damage process contains intact and broken reinforcements in a matrix. To describe the load carrying capacity of cracked reinforcement, the average stress of cracked ellipsoidal inhomogeneity in an infinite body as proposed in the previous paper is introduced. An incremental constitutive relation on particle or short-fiber reinforced composites including progressive cracking of the reinforcements is developed based on Eshelby's (1957) equivalent inclusion method and Mori and Tanaka\`s (1973) mean field concept. Influence of the cracking damage on the stress-strain response of composites is demonstrated.

WRAP-SALT를 이용한 저수지 염분 추적 (Salinity Routing Through Reservoir using WRAP-SALT)

  • 이치헌;고택조
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2012년도 학술발표회
    • /
    • pp.221-221
    • /
    • 2012
  • The WRAP-SALT (Water Rights Analysis Package-SALT) simulation includes computation of end-of-month reservoir storage concentrations and mean monthly reservoir outflow concentrations for each month of the simulation. The model computes reservoir storage loads and concentrations based on load balance accounting algorithms and computes concentrations of water released and withdrawn from a reservoir as a function of the volume-weighted mean concentration of the water stored in the reservoir in the current month or previous months. A load budget accounting of the various component load inflows and outflows entering and leaving a reservoir is performed. A time history of storage concentrations computed for previous months is maintained for use in the lag procedure. This study presents computational methods for routing salinity through reservoirs for incorporation into WRAP-SALT simulation routines and methods for determining values for the parameters of the routing methods.

  • PDF

배전용 변압기 부하사용 패턴분류 (Pattern Classification of Load Demand for Distribution Transformer)

  • 윤상윤;김재철;이영석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
    • /
    • pp.89-91
    • /
    • 2001
  • This paper presents the result of pattern classification of load demand for distribution transformer in domestic. The field data of load demand is measured using the load acquisition device and the measurement data is used for the database system for load management of distribution transformed. For the pattern classification, the load data and the customer information data are also used. The K-MEAN method is used for the pattern classification algorithm. The result of pattern classification is used for the 2-step format of load demand curve.

  • PDF

데이터베이스를 이용한 부하패턴별 수용가 특징 모델링 (Customer Characteristics Modeling for Each Load Pattern using the Database)

  • 이영석;김재철;오정환;윤상윤;박창호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.416-418
    • /
    • 2001
  • This Paper presents the 2-step load cycle of daily load curve for representative load pattern of power distribution transformer. We decide the representative load pattern of distribution transformer in domestic using the pattern classification algorithm. The K-mean method is used for the pattern classification algorithm. The acquisition equipment of field load data is utilized for 96-sample distribution transformers and the field data is used in the construction of the database for the creation of daily load pattern.

  • PDF