• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.3
• /
• pp.204-212
• /
• 2002

The ride comfort is one of the important dynamic performances of railway vehicle and is affected by the various factors, such as vibration, sound, temperature, humidity, etc. In general, vibration is known to be a major effect of rode comfort. There are many studies on the evaluation methods of ride comfort in the railway vehicle vibration. Each of the evaluation methods suggested by Spelling and in the standards recommends a different evaluation method and guidance. So users must review whether they can apply it to their railway system or not. In this study, we have suggested the relationship between several evaluation methods using the statistical vibration model based on the experimental data.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.1-10
• /
• 1992

Three chemical precleaning methods-degreasing, electropolishing and acidic etching-suitable for stainless steel vacuum chamber have been studied and compared. The techniques used in evaluating and comparing the three treatments include Auger analysis and the measurement of the outgassing rate. The obtained outgassing rates (N2 equivalent) are 1.1 $\times$ 10-10torr l/s cm2 and 3.9 $\times$ 10-11torr l/s cm2 for degreasing electropolishing, and etching method, respectively, after 48 hours from the initial pumpdown at room temperature. A simple model is introduced to analyze the pumpdown curve. Some surface parameters, such as surface coverage, mean residence time, and desorption energy, are calculated from corresponding equations derived from this model.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.416-418
• /
• 2001

This Paper presents the 2-step load cycle of daily load curve for representative load pattern of power distribution transformer. We decide the representative load pattern of distribution transformer in domestic using the pattern classification algorithm. The K-mean method is used for the pattern classification algorithm. The acquisition equipment of field load data is utilized for 96-sample distribution transformers and the field data is used in the construction of the database for the creation of daily load pattern.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.304-309
• /
• 2009

We tested the feasibility of measuring fat thickness using a miniaturized chip LED sensor module, testing 12 healthy female subjects. The module consisted of a single detector and four sources at four different source-detector distances (SD). A segmental curve-fitting procedure was applied, using an empirical algorithm obtained by Monte-Carlo simulation, and fat thicknesses were estimated. These thicknesses were compared to computed-tomography (CT) results; the correlation coefficient between CT and optical measurements was 0.932 for bicep sites. The mean percentage error between the two measurements was 13.12%. We conclude that fat thickness can be efficiently measured using the simple sensor module.

• Speech Sciences
• /
• v.10 no.4
• /
• pp.107-115
• /
• 2003

In this paper we tried to classify the pathological voice signal with severe noise component based on two different parameters, the spectral slope and the ratio of energies in the harmonic and noise components (HNR), The spectral slope is obtained by using a curve fitting method and the HNR is computed in cepstrum quefrency domain. Speech data from normal peoples and patients are collected, diagnosed and divided into three different classes (normal, relatively less noisy and severely noisy data), The mean values and the standard deviations of the spectral slope and the HNR are computed and compared with in the three kinds of data to characterize and classify the severely noisy pathological voice signals from others.

• Structural Engineering and Mechanics
• /
• v.44 no.4
• /
• pp.417-429
• /
• 2012

Taking the superficial temperature increment as the major fatigue damage indicator, the infrared thermography was used to predict fatigue parameters (fatigue strength and S-N curve) of welded joints subjected to fatigue loading with a high mean stress, showing good predictions. The fatigue damage status, related to safety evaluation, was tightly correlated with the temperature field evolution of the hot-spot zone on the specimen surface. An energetic damage model, based on the energy accumulation, was developed to evaluate the residual fatigue life of the welded specimens undergoing cyclic loading, and a good agreement was presented. It is concluded that the infrared thermography can not only well predict the fatigue behavior of welded joints, but also can play an important role in health detection of structures subjected to mechanical loading.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.41-46
• /
• 2003

The Phase and temperature changes of large clusters formed in a free jet expansion of acetylene in 14atm and 233K has been studied. The cluster has been treated as a sphere composed of many shells. A mean diameter of 4.88 microns was obtained by modeling the experimental cooling curve of clusters based on evaporation and heat conduction theory.

• Journal of Korean Society for Quality Management
• /
• v.24 no.2
• /
• pp.65-76
• /
• 1996

In general, most industrial products exhibit bath-tub shaped curve for their failure rate functions. This distributional life model can be obtained by the Piecewise Weibull distribution. The least squares, maximum likelihood, and mixed methods of estimating the parameters of the Piecewise Weibull distribution are compared. The comparison is made by using the empirical mean squared errors of (a) the parameter estimates and (b) the estimated change-points, to summarize the results of 1000 simulated samples of three sizes - each 100, 150 and 200. The results are that the mixed method estimation comes to be the best as the sample sizes increase.

• Radiation Oncology Journal
• /
• v.3 no.1
• /
• pp.9-12
• /
• 1985

To determine the radiosensitivity and dose-survival characteristics of jejunal crypt cells, experimental study was done using total 40 mice. Single irradiation of 1,000 rad to 1,600rad was delivered to whole bodies of mice, using a cesium 137 animal irradiator. The number of regenerating crypts per jejunal circumference was counted, by using a jejunal crypt cell assay technique, and dose response curve was measured. The average number of jejunal crypt Per circumference in control group was $140\pm10$. Mean lethal dose$(D_0)$ of moose jejunal crypt cell was 135rad.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.197-203
• /
• 1999

Depending on geographical features and error sources in the survey field, inaccurate data is inevitable in GPS kinematic survey for positioning with feature codes. In this study, the trimmed mean and the first order differential equation are used to develop an inaccurate positioning data detection algorithm, and a cubic spline curve and a linear polynomial are used to interpolate the inaccurate data. Based on interpolated data, a digital map for 30 km range of rural highway is produced and a corresponding GIS coverage map is obtained by analyzing and solving the problem associated with the map.