• Journal of Magnetics
• /
• 제21권4호
• /
• pp.652-659
• /
• 2016

In this study, the efficiencies for both the angular aligned and unaligned positions of the receiver and transmitter coils of wireless power transfer (WPT) systems are examined. Some parameters of the equivalent circuit were calculated with Maxwell 3D software. The analytical solution of the circuit was calculated in MATLAB program through the composition of the system's mathematical modeling. The numerical solution of the system, however, was calculated using PSIM, which is circuit simulation software. In addition, with the use of the finite element method (FEM) in Maxwell 3D software, transient analysis of the three-dimensional system was performed. The efficiency of the system was estimated through the calculation of input and output power. The results demonstrated that power was efficiently transmitted to a certain extent in aligned and unaligned positions. The results also revealed that, for aligned positions, high efficiency with air gaps of 15-20 cm can be obtained and that the efficiency quickly dropped with air gaps of more than 20 cm. For spatially unaligned positions, it was observed that wireless power transfer could be realized with high efficiency with air gaps of up to 10 cm and that efficiency quickly dropped with air gaps of more than 10 cm.

• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.1169-1174
• /
• 2020

본 논문에서는 공사 현장에서 안전고리를 체결하지 않고 일을 하다가 일어나는 추락사고를 방지하기 위해서 두 개의 코일을 이용해서 안전고리의 체결 여부를 감지하는 방법을 제안하였다. 상용 전자파 해석 시뮬레이터인 Ansys사의 Maxwell을 이용해서 안전고리 체결 전, 후의 자기장을 분석했고, 상호 인덕턴스 변화와 그로 인한 수신 코일에 유도되는 전류의 차이를 이용해 안전고리의 체결을 확인할 가능성을 보였다.

• Communications for Statistical Applications and Methods
• /
• 제30권3호
• /
• pp.291-309
• /
• 2023

Longitudinal count data has been widely collected in biomedical research, public health, and clinical trials. These repeated measurements over time on the same subjects need to account for an appropriate dependency. The Poisson regression model is the first choice to model the expected count of interest, however, this may not be an appropriate when data exhibit over-dispersion or under-dispersion. Recently, Conway-Maxwell-Poisson (CMP) distribution is popularly used as the distribution offers a flexibility to capture a wide range of dispersion in the data. In this article, we propose a Bayesian CMP regression model to accommodate over and under-dispersion in modeling longitudinal count data. Specifically, we develop a regression model with random intercept and slope to capture subject heterogeneity and estimate covariate effects to be different across subjects. We implement a Bayesian computation via Hamiltonian MCMC (HMCMC) algorithm for posterior sampling. We then compute Bayesian model assessment measures for model comparison. Simulation studies are conducted to assess the accuracy and effectiveness of our methodology. The usefulness of the proposed methodology is demonstrated by a well-known example of epilepsy data.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.12-18
• /
• 2024

A Electrostatic chuck is a device that fixes the substrate, using the force between charges applied between two parallel plates to attract substrates such as wafers or OLED panels. Unlike mechanical suction methods, which rely on physical fixation, this method utilizes the force of electrostatics for fixation, making it important to verify the adhesion force. As the size of the substrate increases, deformations due to gravity or chucking force also increase, and the adhesion force decreases rapidly as the distance between the chuck and the substrate increases. The outlook for displays is shifting from small to large OLEDs, necessitating consideration of substrate deformations. In this paper, to confirm the deformation of the substrate through various patterns, a simplified 2D model using Ansys' electromagnetic field analysis program, Maxwell, and the static structural analysis program, Mechanical, was utilized to observe changes in adhesion force according to the variation in the air gap between the substrate and the chuck. Additionally, the chucking force was analyzed for the size of the substrate, and the deformation of the substrate was confirmed when gravity and chucking force act simultaneously.

• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.77-83
• /
• 2020

오늘날 자동차 산업의 기술 발전으로 4륜구동 기술이 승용차에도 적용되고 있으며, 이를 위해 트랜스퍼 케이스용 건식 다판클러치가 사용되고 있다. 하지만 건식 클러치의 경우 진동에 대한 문제가 발생하여 승차감에 영향을 주게 된다. 이를 해결하기 위해 4륜 구동장치의 핵심부품인 트랜스퍼케이스에 있는 다판클러치의 체결시 발생하는 충격을 저감시키고자 MR유체가 적용된 다판클러치를 제안한다. MR 다판클러치는 유체커플링 모드와 압착모드를 가지게 되며, 최적 설계를 위해 토크모델을 유도하였다. 다판클러치의 설계변수를 최적화를 위해 Ansys Maxwell을 이용하여 해석을 수행하였고, 전자기장 해석은 디스크와 플레이트의 수를 변경하였을 때 자기장의 세기를 확인하였으며, 자기장의 세기는 최대 0.45 Tesla가 도출되었다. 이를 토크방정식에 적용하여 플레이트 사이 간격을 2mm로 플레이트의 내경과 외경을 각각 45mm와 55mm로 선정하였다. 이와 같이 본 논문에서는 MR 다판클러치의 성능을 극대화할 수 있는 최적 설계기법을 제안하였다.

• 농업과학연구
• /
• 제13권2호
• /
• pp.255-264
• /
• 1986

수확시기(收穫時期)의 벼줄기에 대(對)한 역학적(力學的), 점탄성적(粘彈性的) 특성(特性)을 구명(究明)하기 위(爲)해 압축시(壓縮時) 최대압축하중(最大壓縮荷重), 이력현상(履歷現象), 가공경화현상(加工硬化現象) 및 점탄성(粘彈性) 거동(粘彈性)에 대(對)한 변형속도(變形速度), 초기하중(初期荷重)이 영향을 분석(分析)하며, 도해법(圖解法) 및 computer에 의(依)한 수치해법(數値解法)으로 하중이완(荷重弛緩)의 rheological model 을 제시(提示)코져 시험(試驗)한 결과(結果)는 다음과 같다. 1. 압축시험시(壓縮試驗時) 벼줄기의 최대압축하중(最大壓縮荷重)은 다수계(多收系) 품종(品種)보다 일반계(一般系)에서 큰 경향(傾向)이었다. 2. 동진벼의 부위별(部位別) 최대압축하중(最大壓縮荷重)은 4절간이 가장 컷고, 3절간, 1절간 하부(下部), 2절간, 1절간 상부(上部)의 순(順)으로 작았다. 3. 비례한도내(比例限度內)의 하중(荷重)으로 loading-unloading 할 때 일부의 잔유변형이 발생(發生)하여 탄소성(彈塑性) 변형(變形)을 일으켜 이력손실(履歷損失)을 가져왔다. 4. Loading-unloading cycle을 반부(反復)하면 소성변형(塑性變形)이 감소(減少)하여 가공경화현상(加工硬化現象)을 보였다. 5. 하중이완거동(荷重弛緩擧動)은 변형속도(變形速度)의 증가(增加)에 따라 이완속도(弛緩速度)가 빨라졌다. 6. Computer에 의(依)한 수치해법(數値解法)과 도해법(圖解法)으로 이완거동(弛緩擧動)을 분석(分析)한 결과(結果) 3개지수항(個指數項)으로 표시(表示)되고 일반화(一般化) Maxwell model로 나타내었다. 이 model의 rheology 방정식(方程式)은 다음과 같다. $$F(t)=C_1e^{{-t/{\tau}}_1}+C_2e^{{-t/{\tau}}_2}+C_3e^{{-t/{\tau}}_3}$$ 동진벼줄기의 함수율(含水率) 71.9%(w.b.), 초기하중(初期荷重) 45.5 N, 변형속도(變形速度) 38mm/min 일 때 하중이완(荷重弛緩) 방정식(方程式)은 다음과 같았다. $$F(t)=24.3e^{-t/1006}+7.6e^{-t/12.7}+13.6e^{-t/1.8}$$ 7. 초기변형(初期變形)이 클수록 하중이완(荷重弛緩)은 크게 일어났다.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.58-63
• /
• 1998

Cross-talk effects in high-density volume holographic interconnections are investigated using perturbative iteration method of the integral form of Maxwell's wave equation. In this method, the paraxial approximation and negligence of backward scattering introduced in conventional coupled mode theory is not assumed. Interaction geometries consisting of non-coplanar light waves and multiple index gratings are studied. Arbitrary light polarization is considered. Systematic analysis of cross-talk effects due to multiple index gratings is performed in increasing level of diffraction orders corresponding to successive iterations. Some numerical examples are given for first and third order diffraction.

• Journal of the Optical Society of Korea
• /
• 제1권2호
• /
• pp.67-73
• /
• 1997

Light wave diffraction from multiple superposed volume gratings is inestigated using a perturbative iteration method of the integral equation of Maxwell's wave equation. The host material and index gratings are anisotropic and non-coplanar multiple volume gratings are considered. In this method, the paraxial approximation and lack of backward scattering in conventional coupled mode theory are not assumed. Systematic analysis of anisotropic wave diffraction due to multiple noncoplanar volume index gratings is performed in increasing level of diffraction orders corresponding to successive iterations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1957-1959
• /
• 2004

In this paper, maxwell 3D finite element analysis program was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 2.56[MHz] and some specific conditions.

• International Journal of Contents
• /
• 제7권4호
• /
• pp.50-55
• /
• 2011

To achieve efficient field formulations and fast numerical computations, the reciprocal relations and equivalence between tangential and normal boundary conditions for electromagnetic fields are discussed in terms of the Maxwell's differential equations. Using the equivalence of each boundary condition, we propose the six essential boundary conditions, which may be applicable to matching electromagnetic discontinuities to efficiently design RF devices. In order to verify our approach, the reflection characteristics of a rectangular waveguide step are compared with respect to six essential boundary conditions.