• 제목/요약/키워드: Maximum removal

검색결과 1,137건 처리시간 0.029초

Polysulfone-Escherichia Coli Biomass Composite Fiber에서 아민기의 메틸화가 염기성 염료의 제거에 미치는 영향 (Effect of the Methylation of Amine Groups on Polysulfone-Escherichia Coli Biomass Composite Fiber for Removal of Basic Dye)

  • 박하늘;최한아;김석;윤영상;원성욱
    • 청정기술
    • /
    • 제21권3호
    • /
    • pp.164-170
    • /
    • 2015
  • 본 연구에서는 polysulfone과 Escherichia coli biomass의 현탁액을 방사하여 입상화한 PS-E. coli biomass composite fiber (PSBF)와 PSBF에 존재하는 아민기를 메틸화시킨 amine-methylated PSBF (AM-PSBF)를 제조하였다. PSBF와 AM-PSBF에 의한 염기성 염료 Basic Blue 3 (BB3)의 흡착특성을 비교함으로써 아민기의 메틸화가 BB3의 흡착에 미치는 영향을 확인하였다. pH edge 실험에서는 두 흡착제 모두 pH가 증가할수록 BB3 흡착량이 증가하는 경향을 보였고, 동일 pH에서 AM-PSBF가 PSBF보다 높은 흡착량을 나타내었다. PSBF와 AM-PSBF 모두 흡착평형은 5시간 이내에 도달하였으며, 흡착속도론 실험 데이터는 유사 1차 속도 모델식으로 잘 묘사되었다. 그리고 Langmuir 모델에 따르면, pH 8에서 AM-PSBF의 최대흡착량은 28.9 mg/g로 PSBF의 최대흡착량인 20.7 mg/g보다 약 1.4배 증가하였다. 이 결과로부터 PSBF에서 아민기의 메틸화는 염기성 염료의 흡착을 향상시키는 효과가 있음을 알 수 있다. 또한, 탈착실험 결과는 AM-PSBF가 반복적으로 재사용 될 수 있음을 보여주었다.

윈치커튼식 비육돈사에서 습식공기정화기의 공기정화 효율 분석 (An Air Cleaning Efficiencies of Wet Air Cleaner in the Swine Finishing Winch Curtain Stall)

  • 오인환;김운걸;이한성
    • 한국축산시설환경학회지
    • /
    • 제14권2호
    • /
    • pp.75-80
    • /
    • 2008
  • High concentration of $NH_3$, $CO_2$, and lots of dust are found in modern densely raising stall system, as results, they provide a negative influence on animal and lamer health, and production ability. Therefore, it is necessary to keep clean the inside of stall air to increase the productivity. A wet type air cleaner has been developed to clean the stall air. The work principle is that the inside air are sucked through the fan, and the rotating discs make a water into a fineness spray and blows into the stall. The spray can take the dust, $NH_3$, and odor from the stall inside air and give back to the circulating water, which can be refreshed in 2 hours interval. In the Present study, we measured the $NH_3$, dust, odor, temperature and humidity in a swine stall that were installed two wet air cleaners with 700 fattening swine with on-mode and off-mode of wet air cleaners. In fall, the concentrations of $NH_3$ in off-mode stall were maximum 24 ppm and minimum 16 prm, and the average was 18.2 ppm. However in on-mode stall the $NH_3$ concentrations were maximum 7ppm and minimum 1ppm, and the average was 2.7ppm. The concentration of $NH_3$ in on-mode was 74% lower than off-mode stall. Odor was measured by olfactometer. In the off-mode stall, the odor unit was 3,800 OU/$m^3$, but in the on-mode stall the odor unit was 2,100 OU/$m^3$ Odor removal efficiency was about 45% in on-mode stall. The dust measure was divided into 3 categories, $PM_{10}$, $PM_{2.5}$ and $PM_{1.0}$. Whereas the $PM_{10}$ showed no significant differences between the tests, $PM_{2.5}$ and $PM_{1.0}$ in the fine particle range reduced remarkably in the on-mode.

  • PDF

Effect of $Cr^{6+}$ Stress on Photosynthetic Pigments and Certain Physiological Processes in the Cyanobacterium Anacystis nidulans and Its Chromium Resistant Strain

  • KHATTAR, J. I. S.,;SARMA, T. A.;ANURADHA SHARMA,
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권6호
    • /
    • pp.1211-1216
    • /
    • 2004
  • A MNNG (N-methyl-N'-nitro-N-nitrosoguanidine) induced chromium resistant strain ($Cr^{r}18$) of unicellular cyanobacterium Anacystis nidulans has been isolated and characterized. The resistant strain could grow (although restricted to $50\%$ of control) in chromium concentration (180${\mu}M$) lethal to the wild-type. Sublethal ($160{\mu}M$) concentration of $Cr^{6+}$ significantly reduced (13-$37.5$) all the photosynthetic pigments of A. nidulans with maximum reduction in phycoerythrin followed by ChI $\alpha$. Pigments of A. nidulans were drastically decreased in lethal concentration of Cr^{6+} with maximum reduction in phycoerythrin ($75\%$) and allophycocyanin ($67.5\%$). Resistant strain $Cr^{r}18$ resisted toxic effects of sublethal and lethal concentrations of $Cr^{6+}$ on photosynthetic pigments as revealed by less decrease in pigments as compared to A. nidulans. Effect of $Cr^{6+}$ stress was also studied on nitrogen assimilation and phosphate uptake. Sublethal concentration of $Cr^{6+}$ drastically reduced ($71.5\%$) nitrate uptake by A. nidulans while a decrease of $29\%$ was observed in strain $Cr^{r}18$. Short (2 day) exposure of A. nidulans and its resistant strain $Cr^{r}18\;to\;Cr^{6+}$ did not affect nitrate reductase and glutamine synthetase (transferase), whereas longer (10 day) exposure to $Cr^{6+}$ lowered activities of both enzymes in A. nidulans but not significantly in the strain $Cr^{r}18$. Ammonium uptake by both strains was not affected by $Cr^{6+}$. Thus, $Cr^{6+}$ affected photosynthetic pigments, nitrogen assimilation, and phosphate uptake of A. nidulans, while strain $Cr^{r}18$ was able to resist toxic effects of the metal. Advantages of using strain $Cr^{r}18$ for bioremediation purposes have been evaluated by studying $Cr^{6+}$ removal from the solution. Resistant strain $Cr^{r}18$ was able to remove $33\%$ more $Cr^{6+}$ than A. nidulans and thus it can prove to be a good candidate for bioremediation of $Cr^{6+}$ from polluted waters.

Rhodopseudomonas palustris KK14를 이용한 돈분폐수처리의 최적조건 검토 (Optimal Conditions for Treatment of Swine Wastewater using Rhodopseudomonas palustris KK14)

  • 김한수;이태경;김혁일;조홍연;양한철
    • Applied Biological Chemistry
    • /
    • 제37권4호
    • /
    • pp.295-302
    • /
    • 1994
  • 광합성세균에 의한 고농도 유기폐수 처리공정의 개발을 목적으로 폐수처리용 균주를 분리 동정하고 최근 고농도 유기폐수처리에 도입되고 있는 혐기성 소화와 광합성세균 반응조로 구성된 two-stage system에 적용시켜 각 단계별 폐수처리 최적화를 위한 조건들을 flask-scale에서 검토하였다. 부영양화된 토양, 연못, 논, 활성오니 등으로부터 1차적으로 활성이 높고 유기산 자화율이 우수한 균주를 분리하고 이중 가장 우수한 균주인 KK14를 선별하고 동정한 결과 Rhodopseudomonas palustris로 판명되었다. 광합성세균을 이용한 폐수처리공정의 첫단계인 산생성 단계에서는 혐기정치배양이 유기산 생성에 적합하였고 pH 5.0, HRT 2일로 운전시약 80%의 유기산 증가율을 보였다. 생성된 유기산이 광합성세균에 의해 자화되는 둘째 단계에서는 광합성세균 반응조의 조건을 pH 7.0, 온도 $30^{\circ}C$, 조도 4,000 lux로 했을 때 균의 생육도 및 유기산 자화율이 가장 우수했으며 초기 COD부하(kg COD/kg 광합성세균 건조중량)는 2 전후에서 가장 높은 COD제거율(92%/5일)을 나타내었다.

  • PDF

갱생 옥내급수관 수돗물에서 비스페놀-A 분포 및 위해성 평가 (Distribution and Risk Assessment of Bisphenol-A in Tap Water from Rehabilitated Indoor Water Service Pipe)

  • 정관조;손보영;이인자;안치화;김준일;문보람;이수원;안재찬;김복순;정득모
    • 대한환경공학회지
    • /
    • 제38권7호
    • /
    • pp.371-376
    • /
    • 2016
  • 본 연구에서는 에폭시 수지 갱생 옥내급수관 수돗물에 대해 비스페놀-A 실태조사를 실시하였고, 비스페놀-A가 수돗물 음용에 있어 인체에 미치는 영향을 파악하기 위해 위해성 평가를 실시하였다. 원수 중 비스페놀-A는 50~118 ng/L로 채취된 모든 시료에서 정량한계 10 ng/L 이상으로 검출되었다. 이것은 주변지역의 하수 방류수나 지천에 의한 비스페놀-A 유입에 의한 것으로 판단된다. 정수에서의 비스페놀-A는 불검출되었으며, 고도정수처리 공정에서 모두 제거된 것으로 추정되었다. 응집-침전과정과 오존 및 염소에 의해 산화되어 제거되거나 다른 산화 부산물질로 변화한 것으로 판단된다. 옥내급수관 수돗물의 경우, 에폭시 갱생공사를 실시하지 않은 수돗물 모두에서 비스페놀-A는 검출되지 않았다. 그러나 에폭시 갱생공사를 실시한 옥내급수관 수돗물에서 비스페놀-A가 불검출에서 최대 521 ng/L로 범위로 검출되었으며, 채취된 시료의 68%가 정량한계 이상으로 검출되었다. 검출된 비스페놀-A의 최대값(521 ng/L)에 대한 위해도 지수 산정 결과, 위해도 지수(HQ)는 약 0.004로 수돗물 섭취에 의한 위해판단 기준값 0.1 이하로 나타나 음용에 안전한 것을 확인하였다.

Absidia coerulea와 Thraustochitrium Sp. 에 의한 납과 코발트의 생물흡착 (Biosorption of Lead and Cobalt by Absidia coerulea and Thraustochitrium sp.)

  • 이무열;양지원
    • 대한환경공학회지
    • /
    • 제22권12호
    • /
    • pp.2149-2161
    • /
    • 2000
  • 중금속 폐수 및 방사성 폐액 속에 포함된 납과 코발트를 제거하기 위해 생물흡착제로 Absidia coerulea와 Thraustochitrium sp.를 사용하여 흡착실험을 진행하였다. 납과 코발트 제거의 최적 pH 영역은 blank의 경우 각각 8.4~11.2, 10.5~11.5, Absidia coerulea는 6.5~11.4, 8.6~12.0, 그리고 Thraustochitrium sp.는 4.2~10.5, 8.9~11.6이었다. 초기 pH 5.0에서 1 g/L의 생물흡착제를 투입했을 때 Absidia coerulea와 Thraustochitrium sp.는 104와 125 mg/g dry biomass의 납을 제거할 수 있었으며, 초기 pH 6.0에서 코발트는 단지 2와 20 mg Co/g dry biomass만을 제거할 수 있었다. 초기 500 mg Pb/L, pH 5.0에서 최적 생물흡착제 투입량은 Absidira coerulea와 Thraustochitrium sp.가 각각 0.2 g/L이었으며, 초기 200 mg Co/L, pH 6.0에서는 3.0 g/L이었다 . Absidia coerulea와 Thraustochitrium sp.는 납에 대해서 높은 흡착능을 보였으나 코발트에 대해서는 비교적 낮은 흡착능을 보였다.

  • PDF

하수처리를 위한 막결합형 $A_2O$공정에서 최적 내부 순환율 및 MLSS 농도에 관한 연구 (A Study on the Optical Internal Recycle Rate and MLSS Concentration of Membrane Coupled $A_2O$ Process for Wastewater Treatment)

  • 김관엽;김진모;김형수;이상백;박유진;배성수
    • 멤브레인
    • /
    • 제15권2호
    • /
    • pp.114-120
    • /
    • 2005
  • 본 연구의 목적은 도시 하수처리를 위한 막결합형 $A_2O$공정에 관해 실제적인 정보를 얻고자 하는 것이다. 공경 $0.25\;{\mu}m$의 평판형 정밀여과막을 공기가 주입되는 호기조에 침지시켜 처리수는 저압으로 여과된다. 인공폐수를 대상으로 최적의 처리수질과 장기운전의 안정성 확보를 위한 내부반송율과 MLSS 농도 등의 최적 운전인자를 산정하고자 하였다. 내부반송은 각각 호기조에서 무산조로 반송한 것을 type 1, 무산조에서 혐기조로 반송한 것을 type 2라고 규정지었다. 플럭스는 15 LMH, type 1을 2Q로 고정하고 실험하였을 때 최적의 운전 조건은 MLSS 농도는 11,000 mg/L, type 2가 IQ로 나타났다. 이때, BOD $COD_{cr}$, T-N, T-P의 제거율이 각각 $97.3\%,\;94.2\%,\;64.0\%,\;63.0\%$로 타 내부반송율보다 효과적이었다.

나노버블을 이용한 지하철용 전기집진기 포집먼지에 대한 세척효율 평가 (Evaluation of Washing Efficiency of Collective PM by Electrostatic Precipitator in Subway Station Using Nano Bubble)

  • 이형돈;이승환;박찬규
    • 청정기술
    • /
    • 제26권1호
    • /
    • pp.13-21
    • /
    • 2020
  • 지하역사 내 대기오염물질은 외부에서 유입되거나 또는 지하철 내부의 승객 승·하차 시 발생하는 등 여러 가지 요인에 의해 복합적으로 발생한다. 최근 연구 결과에 따르면, 지하역사 내 터널 및 지하철역에서 발생하는 대부분의 대기오염물질은 열차풍에 의해 발생되는 것과 같이 내부적 요인에 많은 영향을 많이 받는 것으로 알려져 있다. 이러한 대기오염물질을 제어하기 위해서는 지하철역사 내에 전기집진장치와 같은 집진시설이 필요하며, 집진장치에 의해 제거된 미세먼지를 보다 효율적으로 관리하기 위해서는 집진장치 내부에 지속적인 세척이 필수적이다. 따라서 본 연구에서는 지하역사에 설치할 전기집진장치 내부 집진판에 쌓인 미세먼지를 세척하기 위한 나노버블세척 장치를 개발하였고 나노버블수의 먼지세척효율을 평가하고자 하였다. 실험 결과, 분사압 증가에 따라 세척 효율이 일정하게 증가하였고 나노버블수로 세척할 경우 수돗물로 세척한 경우보다 부착먼지 제거효율이 130.8% 더 증가하였다. 세척횟수 증가에 따라 최대 제거효율은 수돗물에 비해 143.1% 높았지만 적합한 세척횟수는 3회 미만인 것으로 나타났다. 또한 나노버블수 체류시간 변화에 따른 세척효율 실험결과, 나노버블수의 최대 체류시간은 5분 이내로 유지됨을 확인하였다.

반도체 습식 세정 공정 중 상온의 초순수와 염기성 수용액 내에서 오존의 용해도 최적화 (The Optimization of Ozone Solubility and Half Life Time in Ultra Pure Water and Alkaline Solution on Semiconductor Wet Cleaning Process)

  • 이상호;이승호;김규채;권태영;박진구;배소익;이건호;김인정
    • 반도체디스플레이기술학회지
    • /
    • 제4권4호
    • /
    • pp.19-26
    • /
    • 2005
  • The process optimization of ozone concentration and half life time was investigated in ultra pure water and alkaline solutions for the wet cleaning of silicon wafer surface at room temperature. In the ultra pure water,. the maximum concentration (35 ppm) of ozone was measured at oxygen flow rate of 3 liters/min and ozone generator power over 60%. The half life time of ozone increased at lower power of ozone generator. Additive gases such as $N_2$ and $CO_2$ were added to increase the concentration and half life time of ozone. Although the maximum ozone concentration was higher with the addition of $N_2$ gas, a longer half life time was observed with the addition of $CO_2$. When $NH_4OH$ of 0.05 or 0.10 vol% was added in DI water, the pH of the solution was around 10. The addition of ozone resulted in the half life time less than 1 min. In order to maintain high pH and ozone concentration, ozone was continuously supplied in 0.05 vol% ammonia solutions. 3 ppm of ozone was dissolved in ammonia solutions. The static contact angle of silicon wafer surface became hydrophilic. The particle removal was possible alkaline ozone solutions. The organic contamination can be removed by ozonated ultra pure water and then alkaline solution containing ozone can remove the particles on silicon surface at room temperature.

  • PDF

Study on Growth Characteristics of Sargassum fulvellum in the Integrated Multi-trophic Aquaculture (IMTA) System

  • Kim, Young-Dae;Park, Mi-Seon;Min, Byung-Hwa;Jeong, Seong-Jae;Kim, Hyung-Chul;Yoo, Hyun-Il;Lee, Won-Chan;Choi, Jae-Suk
    • 한국환경과학회지
    • /
    • 제23권10호
    • /
    • pp.1703-1718
    • /
    • 2014
  • An eco-friendly integrated multi-trophic aquaculture (IMTA) farming technique was developed with the goal of resolving eutrophication by excess feed and feces as fish-farming by-products. A variety of seaweed species were tried to remove inorganic nutrients produced by fish farming. However, there have been few trials to use Sargassum fulvellum in an IMTA system, a species with a relatively wide distribution across regions with various habitat conditions, great nutrient removal efficiency and importance for human food source and industrial purposes. In this regard, our study tried to examine feasibility of using S. fulvellum in an IMTA system by analyzing growth characteristics of the species in an IMTA system comprising of rockfish (Sebastes shlegeli), sea cucumber (Stichopus japonocus) and the tried S. fulvellum (October 2011 - November 2012). We also monitored environment conditions around the system including current speed, water temperature and inorganic nutrient level as they may affect growth of S. fulvellum. S. fulvellum in the IMTA system, which were $15.72{\pm}5.67mm$ long at the start of the experiment in October 2011, grew to a maximum of $1093{\pm}271.13mm$ by May 2012. In September, seaweed growth was reduced to a minimum of $280{\pm}70.43mm$ in length. Then, S. fulvellum began to grow again reaching $325{\pm}196.19mm$ by November 2012. Wet weight of the seaweed was $4.01{\pm}1.89g$ at the start of the experiment and reached a maximum of $109.26{\pm}34.23g$ in May. The weight gradually declined to a low of $15.12{\pm}8.40g$ in September 2012. Weight began to increase once more, rising to $39.27{\pm}21.69g$ by November. During the experiment, the average velocity at the surface and the bottom was 6.5 cm/s and 3.4 cm/s, respectively. The water temperature ranged $5.0-23.5^{\circ}C$, which was considered suitable for growing S. fulvellum. Results of the study indicated no significant differences in inorganic nutrients between pre- and post-IMTA installation. It was thus concluded that S. fulvellum can be a suitable seaweed species to be used in an IMTA system.