• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.127-132
• /
• 2018

In this paper, a high conversion gain cascode mixer was designed in W-band and verified by the fabrication and measurements. In the high frequency band such as a W-band, the conversion loss of a mixer is increased because of the poor performance of transistors. This high conversion loss of the mixer requires additional circuits which can give an extra gain such as an RF buffer amplifier, and this can affects the linearity and stability of the overall systems. Therefore, it is necessary to maximize the conversion gain of the mixer. To maximize the conversion gain of the mixer, biases of the transistor were optimized, and output load impedance was optimized by the load-pull simulations. The designed mixer was fabricated in $0.1-{\mu}m$ GaAs pHEMT technology and verified by the measurements. The measurement results shows a maximum conversion gain of -4.7 dB at W-band and an input 1-dB compression point of 2.5 dBm.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.373-380
• /
• 2001

In this research, a controller design method based on optimization is proposed that can satisfy constraints on maximum responses of building structures subject to ground excitation modeled by partially stationary stochastic process. The class of controllers to be optimized is restricted to LQR. Weighting matrix on controlled outputs is used as design variable. Objective function constraint functions and their gradients are computed parameterizing control gain with Riccati matrix. Full state feedback controllers designed by Proposed optimization method satisfy various design objectives and their necessary maximum control forces are computed fur the production of actuator. Probabilities of maximum responses match statistical data from simulation results well.

• Journal of Broadcast Engineering
• /
• v.27 no.7
• /
• pp.974-984
• /
• 2022

In this paper, we introduce the minimum and maximum distance setting methods used in geometric distance attenuation processing, which is one of spatial sound reproduction methods. In general, sound attenuation by distance is inversely proportional to distance, that is 1/r law, but when the relative distance between the user and the audio object is very short or long, exceptional processing might be performed by setting the minimum distance or the maximum distance. While MPEG-I Immersive Audio's RM0 uses fixed values for the minimum and maximum distances, this study proposes effective methods for setting the distances considering the signal gain of an audio object. Proposed methods were verified through simulation of the proposed methods and experiments using RM0 renderer.

• Water Engineering Research
• /
• v.1 no.1
• /
• pp.11-23
• /
• 2000

Regional flood frequency analysis has been developed by employing the nearby site's information to improve a precision in estimating flood quantiles at the site of interest. In this paper, single site and regional flood frequency analyses were compared based of the 2-parameter Weibull model. For regional analysis, two approaches were employed. The First one is to use the asymptotic variances of the quantile estimators derived based of the assumption that all sites including the site of interest are independent each other. This approach may give the maximum regional gain due to the spatial independence assumption among sites. The second one in Hosking's regional L-moment algorithm. These methods were applied to annual flood data. As the results, both methods generally showed the regional gain at the site of interest depending on grouping the sites as homogeneous. And asymptotic formula generally shows smaller variance than those from Hosking's algorithm. If the shape parameter of the site of interest from single site analysis is quite different from that from regional analysis then Hosking's results might be better than the asymptotic ones because the formula was derived based on the assumption that all sites have the same regional shape parameter. Furthermore, in such a case, regional analysis might be worse than single site analysis in the sense of precision of flood quantile estimation. Even though the selected sites may satisfy Hosking's criteria, regional analysis may not give a regional gain for specific and nonexceedance probabilities.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.15-18
• /
• 2013

This paper presents an analog front-end for electroencephalogram(EEG) signal processing. Since EEG signals are typically weak and located at very low frequencies, it is imperative to implement an amplifier with high gain, high common-mode rejection ratio(CMRR) and good noise immunity at very low frequencies. The analog front-end of this paper consists of a programmable-gain instrumentation amplifier and a band-pass filter. A frequency chopping technique is employed to remove the low-frequency noise. The circuits were fabricated in 0.18um CMOS technology and measurements showed that the analog front-end has the maximum gain of 60dB and >100dB CMRR over the programmable gain range.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.21 no.4
• /
• pp.139-149
• /
• 2008

Purpose: The purpose of this study was to examine the relationships between variety pregnancy related factors and postpartum BMI change. Methods: Analyzing the BMI of 125 postpartum women in oriental medical hospital of O O university from March, 2008 to May, 2008. Age, pregnancy period. type of delivery, parity, pregravida(PG) BMI, weight and BMI gain during pregnancy, gestational maximum(GMx) BMI were recorded. BMI also checked on each postpartum 7days(P7d), 14days(P14d), 90days(P90d), And we distinguished into Sasang Constitution by QSCC II. Results: The following results were obtained: 1. Age. pregnancy period were not correlated to postpartum BMI change. 2. PG BMI were lower in normal delivery group than caesarean delivery group. 3. PG BMI was lower in primipara group than multipara group. Weight and BMI gain during pregnancy. P90d BMI were lower in multipara group. 4. PG, GMx, P7d, P14d, P90d BMI were significally high in Taeumin. 5. PG BMI were correlated to GMx, P7d, P14d, P90d BMI. 6. Weight and BMI gain during pregnancy were correlated to GMx BMI and P7d, P14d, P90d BMI, BMI loss. Conclusion: This results suggested that weight and BMI gain during pregnancy have the best relationship with postpartum weight change.

• Journal of Animal Science and Technology
• /
• v.66 no.3
• /
• pp.555-566
• /
• 2024

The aim of the present experiment was to determine the standardized ileal digestible (SID) methionine (Met) requirement during the grower phase (22 to 29 days). A total of 192 Ross 308 male broilers (745 ± 50.5 g) were assigned to six dietary treatments in a randomized complete block design, with eight replicate cages per treatment. The experimental diets were formulated based on corn, soybean meal, and synthetic amino acids (AA), with different levels of dietary SID Met ranging from 0.40% to 0.65%, in increments of 0.05%. Individual body weight and feed intake per cage were measured at the beginning and end of the experimental period. Weight gain (g/bird), feed intake (g/bird), gain-to-feed ratio (g/kg), feather weight (g), and relative feather percentage (% of body weight) were analyzed for linear or quadratic responses using orthogonal polynomial contrasts. Final body weight, weight gain, and feed intake increased quadratically as dietary SID Met concentration increased (p < 0.05). However, the composition of AA in the feathers showed no quadratic or linear effect based on dietary SID Met concentrations, except for Ile (p = 0.05; quadratic). The SID Met requirements for optimum and maximum weight gain of 22 to 29-days-old male broilers were estimated using the broken-line and quadratic-line models to 0.45% and 0.55%, respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

In this paper, an equally spaced $3{\times}2$ microstrip patch array antenna based on the fundamental infinite wavelength supported by the composite right/left-handed (CRLH) transmission line (TL) is proposed. The proposed CRLH TL unit cell consists of an inter-digit capacitor to realize left-handed (LH) series capacitance and non-symmetric shunt meander line with a shorted via to realize LH shunt inductance. At the infinite wavelength frequency of 2.09 GHz a 6-port series power divider consisting of a 19 unit cells shows a maximum magnitude difference of 0.73 dB and a $0.52^{\circ}$ maximum phase difference between output ports. The measured resonant frequency and maximum gain of the fabricated array antenna is 2.09 GHz and 10.98 dBi, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.37-42
• /
• 2010