• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2049-2058
• /
• 1992

본 연구에서는 OHC형 캠-밸브 기구의 6자유도 집중 질량계 모델을 기본으로 하고, 밸브변위와 선회종동자(oscillating-follower or finger-follower)의 동적 스트 레인을 측정하여 모델의 타당성을 검증하고, 또 최적화 기법을 도입하여 밸브 개폐시 기, 밸브변위 그리고 최소 접촉력 등을 구속조건으로 주고 캠과 종동자 사이의 최대 접촉력을 최소화 시키도록 최적 캠 형상을 설계하였다. 그리고 설계된 캠을 정밀 가 공하여 최적화 설계의 타당성 및 접촉력을 실험을 통하여 검증하였다.

• 인간행동과 음악연구
• /
• 제10권2호
• /
• pp.79-97
• /
• 2013

본 연구는 MIDI(Musical Instrument Digital Interface) 프로그램을 연결한 키보드 연주 시 일반인의 각 손가락 타력 표준치를 측정하고자 실시되었다. 연구 대상은 서울과 충청 지역 대학에 재학 중인 학생 총 92명(남성 46명, 여성 46명)으로 평균 연령은 만 18세부터 28세였다(평균나이: 21.7, 표준편차: 1.8). 연구 대상자의 음악교육경험 및 기간에 관한 조사를 선행한 후, 연구대상자의 각 손가락을 이용하여 키보드 건반을 상행 및 하행으로 타건하도록 하였다. 개인별 타건의 MIDI값을 분석해 본 결과 최대 강도 127 중 77~97의 수치를 기록하였다. 남성의 경우 최대값은 우세손 손가락의 검지에서 96.9를 기록했고, 최저값은 비우세손 약지에서 78.5 나타났다. 여성은 우세손 중지의 타력값이 92로 가장 높았으며 최저값은 남성과 유사하게 비우세손 약지에서 77.5로 나타났다. 참여자들의 우세손과 비우세손 손가락 타력의 차이는 엄지를 제외한 모든 손가락에서 통계적으로 유의미한 차이를 보였으나(p < .05) 성별과 악기 연주 경험에서는 유의미한 차이가 나타나지 않았다(p < .05). 본 연구에서 측정된 손가락 타력의 표준치는 건반악기와 MIDI프로그램의 사용이 손기능을 평가하는 도구로 활용될 수 있으며, 손기능 중재 방안의 효과성 입증을 위한 근거 자료로 활용 될 수 있음을 시사한다.

• 센서학회지
• /
• 제20권5호
• /
• pp.351-356
• /
• 2011

Stroke patients should exercise for the rehabilitation of their fingers, because they can't use their hand and fingers. Their hand and fingers are fixed on the hand fixing system for rehabilitation exercise of them. But the hands clenched the fist of stroke patients are difficult to fix on it. In order to fix the hands and fingers, their palms are pressed with pressing bars and are controlled by reference force. The fixing system must have a five-axis force/moment sensor to force control. In this paper, the five-axis force/moment sensor was developed for the hand fixing system of finger-rehabilitation exercising system. The structure of the five-axis force/moment sensor was modeled, and designed using finite element method(FEM). And it was fabricated with strain-gages, then, its characteristic test was carried out. As a result, the maximum interference error is less than 2.43 %.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1774-1779
• /
• 2014

It is known that muscle strength of human body can alter or deteriorate as aging. In this study, we present an inverse dynamics simulation to investigate the effect of muscle strength on performing the daily activities. A 3D musculoskeletal model developed in this study includes several segments of whole body, long and short muscles, ligaments and disc stiffness. Five daily activities such as standing, flexion, finger tip to floor, standing lift close and lifting flexed were simulated with varying the maximum muscle force capacities (MFC) of each muscle fascicles from 30 to $90N/cm^2$ with an increment of $30N/cm^2$. In the result, no solution can be obtained for finger tip to floor and lifting flexed with $30N/cm^2$. Even though the solution was available for standing lift close activity in case of $30N/cm^2$ capacity, many of muscle fascicles hit the upper bound of muscle strength which means that it is not physiologically possible to perform the acvities in reality. For lifing flexed, even the case of $60N/cm^2$ capaciy, represents the moderate healthy people, was not able to find the solutions, showing that 18 muscles among 258 muscle fascicles reached 100% of muscle capacity. The estimated results imply that people who have low muscle strength such as elders or rehabilitation patients were required higher muscle work to perform and maintain the same daily activities than healthy one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.24.2-27
• /
• 1996

This paper is a study on the fuzzy force control of a miniature gripper driven by piezoelectric bimorph actuator. The system is composed of two flexible cantilevers, a stepping motor, a laser displacement transducer and two semiconductor force sensors attached to the beams. Obtained results show that the present artificial finger system works well as a miniature gripper, which produces approximately 0.06N force in the maximum. Further, the fuzzy position/force control algorithm is applied to the soft-handing gripper for stable grasping of a object. It revealed that the fuzzy rule-based controller be efficient controller for the stable drive of the flexible miniature gripper. It also showed that two semiconductor strain gauges located in the flexible beam play an important roles for force control, position control and vibration suppression control.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1259-1265
• /
• 2003

We present a new post-fabrication frequency tuning method for laterally driven electrostatic microresonators using a DC-biased electrostatic comb array of linearly varied finger-length. The electrostatic tuning force and the equivalent stiffness, adjusted by the DC-biased tuning-comb array, have been formulated as functions of geometry and DC tuning voltage. A set of frequency-turnable microresonators has been designed and fabricated by 4-mask surface-micromachining process. The resonant frequency of the microfabricated microresonator has been measured for a varying tuning voltage at the reduced pressure of 1 torr. The maximum 3.3% reduction of the resonant frequency is achieved at the tuning voltage increase of 20V.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.81-86
• /
• 2015

This paper presents a disposable passive suction pump that uses the restoring force of an elastomeric chamber for liquid transportation in a microfluidic system. The proposed suction pump can be operated by finger pressure without any peripheral equipment. To adjust the generated suction pressure, five different displacements of the suction chamber ceiling, two different chamber shapes, and five different elastic moduli of the elastomer were considered. For a cylindrical chamber with a 5 mm height and 5 mm radius, the generated suction pressure and flow rate increased almost linearly up to about 31 kPa and $160.8{\mu}L/min$, respectively, depending on the chamber deformation. A maximum suction pressure of $42.9{\pm}0.7kPa$ was obtained for a hemispherical chamber with a 2.1 mm height and 5 mm radius.

• 한국공간구조학회논문집
• /
• 제20권2호
• /
• pp.39-49
• /
• 2020

In this study, we will develop a hybrid cross-sectional shape of steel inserted type glued-laminated timber that can improve the strength of structural glued-laminated timber and maximize the ductility by using steel plate with excellent tensile and deformation ability. A total of three specimens were fabricated and the flexural performance test was carried out to evaluate the structural performance of the steel inserted type glued-laminated timber. In order to compare the effect of steel inserted glued-laminated timber, one structural glued-laminated timber test specimen composed of pure wood was manufactured. In addition, in order to evaluate the adhesion performance of the steel inserted, one each of a screw joint test specimen and a polyurethane joint test specimen was prepared. As a result, all the specimens showed the initial crack in the finger joint near the force point. This has been shown to be a cause of crack diffusion and strength degradation. The use of finger joints in the maximum moment section is considered to affect the strength and ductility of the glued-laminated timber beam. Polyurethane-adhesive steel inserted glued-laminated timber showed fully-composite behavior with little horizontal separation between the steel plate and glued-laminated timber until the maximum load was reached. This method has been shown to exhibit sufficient retention bending performance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.170-175
• /
• 2018

내진 성능 학보를 위해서는 신축이음장치가 지진력에 대하여 적절한 변형이 발생하여 신축이음장치의 파괴를 방지하여야 하는데 최근에 국내에서 신축이음장치의 핑거부에 힌지를 설치하여 교축방향의 지진력에 대한 변위 저항성을 확보한 신제품이 개발되고 있다. 이에 본 논문에서는 가변형 핑거 조인트를 가지는 신축이음장치에 대하여 실물규모의 교축직각방향 하중에 대한 저항성을 실험적으로 평가하였다. 실험결과, 최대 수평변위는 기존 신축이음 실험체의 경우 약 21.1mm, 내진 신축이음 실험체의 경우 51.00mm로 나타났으며, 기존제품은 추가적으로 16.5mm의 솟음이 발생되었다. 기존 신축이음 실험체는 어느 정도의 교축직각 방향의 하중에 대하여 저항한 후, 핑거의 휨 및 전단 변형이 과도하게 발생되며 파단 현상이 발생할 가능성이 있을 것으로 추정된다. 반면에 내진 신축이음 실험체의 경우, 교축 직각방향의 하중에 대하여 하중에 대한 변형을 핑거의 힌지가 흡수하여 신축이음장치 및 상부구조에 응력을 발생시키지 않고 다만 하중 작용방향으로의 수평 변형만 발생시킬 것으로 예상된다.

• 대한인간공학회지
• /
• 제24권4호
• /
• pp.15-21
• /
• 2005

Use of a glove made of materials with a low elasticity decreases the performance of the hand such as agility, dexterity, range of motion, and grip strength. The present study examined if the adverse effects of a low-elastic glove can be reduced by a design which accommodates the changes of hand surface lengths by hand motion. Two glove designs which provide patches of elastic cloth and pleats at the finger joints and knuckle were developed by considering the hand surface length changes, and then compared with two conditions(bare hand and conventional glove design that does not consider the dynamic characteristics of the hand dimensions) in terms of completion time in peg board insertion task, maximum grip strength, discomfort in hand motion, discomfort in force exertion, and overall discomfort by 24 right-handed participants. The test results confirmed that wearing of a glove significantly reduced the agility and grip strength capability of the hand and indicated that the novel designs were effective to lessen the performance decreases compared to the conventional design. Also, of the glove designs, the pleat glove design was found most preferred for both better hand performance and less subjective discomfort.