• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.27-37
• /
• 1996

This paper proposes the control algorithm for maximum efficiency drive of PWM inverter - induction motor system with high dynamic performance. If the induction motor is driven under light load with rated magnetizing current, the Iron loss is excessively large compared with the codder loss which results in doer motor efficiency. Maximum efficiency drive of an induction motor can be achieved by controlling the magnetizing current to satisfy the optimal ratio that leads the total motor loss to be a minimum value at a given speed. The proposed control algorithm essentially uses vector control technique and adopts voltage decoupling control strategy to prevent the degradation of dynamic performance due to reduced magnetizing current. To verify the proposed method, digital simulations and experiments are carried out for a squirrel-cage induction motor with the rating of 2.2[kW].

• 한국산업융합학회 논문집
• /
• 제20권3호
• /
• pp.213-220
• /
• 2017

This paper proposes an optimal current control method for improving efficiency of Brushless Direct Current (BLDC) motor. The proposed optimal current control method is based on the maximum torque point analysis of Finite Element Analysis (FEA). The proposed method can increase the effective voltage at the maximum torque point of BLDC motor and increase the output torque per unit current to increase the efficiency. In order to verify the proposed optimal current control method, have developed the prototype of a 50 [W] class motor drive and experimented by 20 [W] motor using the dynamometer set. This was verified.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.108-115
• /
• 2015

This paper proposed a optimal current control method to improve efficiency of BLDC motors. The aim of the proposed method is to use the maximum torque operating method by increasing the effective voltage at the maximum torque point unlike existing SPM operating method. The proposed method is based on existing IPM maximum torque operating method grafting onto a square wave operating of SPM motors. As the method of increasing the effective output voltage from inverter using the maximum torque point, the proposed method is to improve efficiency of BLDC motors using the same amount of the existing current effectively. For this method, the maximum torque point is carried out by FEA and analysis of magnetic flux vector. In this paper, the prototype of general-purpose BLDC drive is manufactured and the performance characteristic and validity are verified.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.164-172
• /
• 2001

본 논문에서는 대표적인 MPPT(Maximum Power Point Tracking)제어 알고리즘인 일정전압제어, P&O(Perturbation and Observation)제어, IncCond(Incremental Conductance)제어에 대하여 서술하고, 그 효율성을 검토해 보았다. 이를 위하여 시뮬레이션 및 효율시험을 통하여 정상상태 및 과도상태에 대한 각 알고리즘별 특성 및 효율을 분석하였다. 또한, MPPT 제어의 고효율화를 위하여 기존의 제어 알고리즘을 개선한 Two-Mode 제어법을 제안하였으며, MPPT 효율측정을 위한 회로구성 및 측정 방법을 제시하였다.

• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.21-25
• /
• 2009

속도와 토크의 값이 다른 5개의 동작점에서 효율이 최대가 되는 자속을 구한 후, 5개의 자속을 이용하여 효율이 최대가 되는 자속의 곡면을 구한다. 주어진 속도와 토크를 이용하여 자속곡면에서 효율이 최대가 되는 자속을 구한 후, 이 자속을 초기값으로 하여 미리 정해진 양만큼 자속을 변화시키면서 최대효율제어를 수행한다. 시뮬레이션 결과 제안한 방법에 의하여 신속히 최대효율제어를 위한 자속으로 수렴함을 보인다.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1075-1082
• /
• 2010

This paper analyzes a operating characteristic for maximum power point tracking (MPPT) of photovoltaic generation system. MPPT methods are used to maximize PV array output power by tracking maximum power point(MPP) continuously. To increase the output efficiency of PV system, it is important to have more efficient MPPT. MPPT algorithm is widely used the control method such as the perturbation and observation(PO) method, incremental conductance(IC) method and constant voltage(CV) method. In case of the radiation is changed, this paper proposes a response characteristic with MPPT control algorithms. Also, it proposes the direct for a novel MPPT control algorithm development through the analyzed data, hereby proves the effectiveness of this paper.

• 조명전기설비학회논문지
• /
• 제22권5호
• /
• pp.58-63
• /
• 2008

유도전동기 고정자자속 기준제어의 최대효율제어를 위한 초기자속 값의 계산방법을 제안한다. 3개의 자속에 대한 입력을 계산한 후 3점을 2차 보간하여 2차 함수의 최소점, 즉 입력이 최소가 되는 자속을 구하고, 이 자속을 초기 값으로 하여 최대효율제어를 수행한다. 시뮬레이션 결과 기존의 방법에 비해서 제안한 방법에 의하여 최대효율점으로의 수렴시간이 단축됨을 보인다.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.62-66
• /
• 2009

3개의 자속에 대한 유도전동기의 입력을 계산한 후 3점을 2차 보간하여 2차 함수를 만들고, 입력이 최소가 되는 새로운 자속을 구한 후, 이 자속을 이용하여 다시 2차 보간하여 입력이 최소가 되는 자속을 구하는데, 새로운 점을 사용한 2차 보간을 수렴조건을 만족할 때까지 반복해서 입력이 최소가 되는 자속을 구하는 방법을 제안한다. 시뮬레이션 결과 최대효율제어를 위한 자속으로 신속한 수렴이 가능함을 보인다.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.626-633
• /
• 2011

This paper presents a novel maximum efficiency control scheme for convergence improvement in stator-flux-oriented induction motor drives. Three input powers are calculated at three different flux levels, respectively. A quadratic curve is obtained using the quadratic interpolation method using the three points. The flux level at the lowest point of the interpolated curve is calculated, which is not the real minimum input power of the motor, but an estimated one. Hence, the quadratic interpolations are repeated with three new points chosen using the selection method for new points for refitting until the convergence criteria are satisfied. The proposed method is verified by simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.103-105
• /
• 2009

This paper presents the maximum-power control simulation for PMA-SynRM. For maximum power, the maximum torque / current control method is conducted in constant-torque range and flux-weakening control method is conducted in constant-power range. For considering the nonlinear characteristics of inductance, machine constant is determined by FEM. Finally, experiment is conducted to calculate the efficiency.