• Nuclear Engineering and Technology
• /
• 제36권3호
• /
• pp.203-209
• /
• 2004

In-phantom neutron flux distribution is measured at the HANARO BNCT irradiation facility. The measurements are performed with Au foil and wires. The thermal neutron flux and Cd ratio obtained at the HANARO BNCT facility are $1.19{\times}10^9\;n/cm^{2}s$ and 152, respectively, at 24 MW reactor power. The measured in-phantom neutron flux has a maximum value at a depth of 3 mm in the phantom and then decreases rapidly. The maximum flux is about $25\%$ larger than that of the phantom surface, and the measured value at a depth of 22 mm in the phantom is about a half of the maximum value. In addition, the neutron beam is limited well within the aperture of the neutron collimator. The two-dimensional in-phantom neutron flux distribution is determined. Significant neutron irradiation is observed within 20 mm from the phantom surface. The measured neutron flux distribution can be utilized in irradiation planning for a patient.

• 소성∙가공
• /
• 제9권2호
• /
• pp.186-192
• /
• 2000

Some deep drawing characteristics to the elevated temperatures were investigated for the SCPI steel sheets by using the Cr-coated die. For this investigations, six steps of temperature ranges, from room temperature to 25$0^{\circ}C$, and six kinds of drawing ratio, from 2.4 to 2.9 were adopted. As a result, the limiting drawing ratio, maximum drawing force, and the maximum drawing depth were sensitively affected by the elevated temperatures, and the more stable thickness strain distribution was observed to the elevated temperatures. Some experimental results were compared with analytical results using the DYNA-3D code.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.665-670
• /
• 1988

The behavior of mechanical properties of ion exchanged glasses was investigated in this study. The used glasses were soda-lime-silica glasses that were produced by float process. The maximum values of the bending strength and the curvature depth are 45Kg/$\textrm{mm}^2$ and 8.6mm respectively treated at 45$0^{\circ}C$ for 6h, which are 4.4 times and 3.3 times higher than parent glass. In the case, the thermalshock resistance ΔT is 335$^{\circ}C$ that is 205$^{\circ}C$ higher than parent glass, which is the maximum values in this study. The maximum values of the surface microhardness is 490Kg/$\textrm{mm}^2$ in case of 43$0^{\circ}C$ for 4h. It is also found out that annealing points are increased linearly with increasing the amount of K+ ion exchange independent of treatment temperature. Furthermore, the present work shows that the ion exchange strengthened glasses are more effective than the physical tempering glasses ; the bending strength and the curvature depth are 1.8 times and twice higher respectively.

• Communications for Statistical Applications and Methods
• /
• 제30권5호
• /
• pp.453-465
• /
• 2023

The prediction problem of univariate records, though not addressed in multivariate records, has been discussed by many authors based on records values. There are various definitions for multivariate records among which depth-based records have been selected for the aim of this paper. In this paper, by means of the maximum likelihood and conditional median methods, point and interval predictions of depth values which are related to the future depth-based multivariate records are considered on the basis of the observed ones. The observations derived from some elements of the elliptical distributions are the main reason of studying this problem. Finally, the satisfactory performance of the prediction methods is illustrated via some simulation studies and a real dataset about Kermanshah city drought.

• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.1-7
• /
• 2004

The application of abrasive-assisted high energy water-jet was investigated as a possible new method of cutting wood. In this study the maximum cutting speeds for species of various wood density were determined and water-jet machining characteristics were investigated for sixteen Korean domestic species. The maximum cutting speed ranged from 200 to 750 mm/min. The results indicate that wood density affects machining characteristics such as maximum cutting speed, surface roughness, and kerf width. Roughness of surface generated increased and kerf width decreased as penetration depth increased.

• 대한방사선치료학회지
• /
• 제14권1호
• /
• pp.35-39
• /
• 2002

Introduction : It is essential to input patients external contour in 3D treatment plan. We would like to see changes in depth and dose when 3D RTP is operating auto contouring when windows value (Width/Level) differs in this process. Material & Methode : We have analyzed the results with 3D RTP after CT Scanning with round CT Phantom. We have compared and analyzed MU values according to depth changes to Isocenter changing external contour and inputting random Window value. We have watched change values according to dose optimization in 4 directions(LAO, LPO, RAO, RPO), We plan 100 case for exact analyzation. We have results changing window value random to each beam in 100 cans. Result : It showed change between minimum and maximum value in 4 beam is Depth 0.26mm, MU $1.2\%$ in LAO. It showed LPO-Depth 0.13mm, MU $0.9\%$, RAO-Depth 0.2mm MU $0.8\%$, RPO-Depth 0.27mm, MU $1.1\%$ Conclusion : Maximum change in depth 0.27 mm, MU error rate is $0.12\%$ according to Window change. As we can see in these results, it seems Window value change doesn't effect in treatment. However, it seems there needs to select appropriate Window value in precise treatment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권6호
• /
• pp.2271-2288
• /
• 2015

The emerging high efficiency video coding (HEVC) standard adopts the quadtree-structured transform unit (TU) in the residual quadtree (RQT) coding. Each TU allows to be split into four equal sub-TUs recursively. The RQT coding is performed for all the possible transform depth levels to achieve the highest coding efficiency, but it requires a very high computational complexity for HEVC encoders. In order to reduce the computational complexity requested by the RQT coding, in this paper, we propose a fast TU size decision method incorporating an adaptive maximum transform depth determination (AMTD) algorithm and a full check skipping - early termination (FCS-ET) algorithm. Because the optimal transform depth level is highly content-dependent, it is not necessary to perform the RQT coding at all transform depth levels. By the AMTD algorithm, the maximum transform depth level is determined for current treeblock to skip those transform depth levels rarely used by its spatially adjacent treeblocks. Additionally, the FCS-ET algorithm is introduced to exploit the correlations of transform depth level between four sub-CUs generated by one coding unit (CU) quadtree partitioning. Experimental results demonstrate that the proposed overall algorithm significantly reduces on average 21% computational complexity while maintaining almost the same rate distortion (RD) performance as the HEVC test model reference software, HM 13.0.

• 한국지반공학회논문집
• /
• 제26권12호
• /
• pp.51-60
• /
• 2010

자중에 의한 토압은 일반적으로 깊이에 따라 선형비례하여 증가되지만, 상재하중에 의해 발생되는 토압은 분포형태와 지반상태 및 경계조건에 따라 다르게 분포한다. 본 연구에서는 변위가 구속된 강성벽체에 연직상재하중에 의한 토압분포를 실험적으로 연구하기 위하여 실내모형토조[30 cm(폭) ${\times}$ 110 cm(길이) ${\times}$ 88 cm(높이)]에 각 2개의 로드셀이 배치된 8개의 토압판으로 구성된 강성벽체를 설치하여 연직상재하중의 크기와 위치(벽체에서 이격거리)를 변화시켜 가면서 토압분포와 토압의 영향범위를 관찰하였다. 실험결과, 연직상재하중에 의해 발생되는 수평토압은 일정위치에서 최대값을 보이고 깊어질수록 감소하여 한계깊이를 초과하면 무시할 만큼 작아졌다. 수평토압이 최대가 되는 깊이와 한계깊이는 연직상재하중의 크기와는 무관하게 벽체와의 이격거리에 따라 다르게 나타났다.

• 한국수자원학회논문집
• /
• 제56권3호
• /
• pp.195-210
• /
• 2023

국내 대하천은 2010년 대규모 정비사업 이후 자연적 안정화를 위한 추가 재퇴적 및 침식이 진행 중에 있어 정밀 하상 모니터링이 요구되고 있다. 초분광수심법은 저수심의 고해상도 하천 수심측정 측면에서 종래의 접촉식 수심측정 기법을 대체하거나 보완할 수 있는 방법으로 각광을 받기 시작하였다. 본 연구는 초분광수심법에서 대표적인 최적밴드비기법을 소개하고 국내 대하천인 낙동강과 황강 합류부에서 평수기 전형적인 탁도조건에서 초분광수심법을 적용하여 수심맵을 산정하여 국내 하천으로의 적용성을 평가하였다. 이를 위해 수심영역별 최적밴드비기법으로 도출되는 상관도와 평균제곱근오차를 적용하여 최대측정가능수심을 산정하였고 최대추정가능수심 이상은 관계식 구축 시와 수심맵 산정 시 제외시켰다. 그리고 수심과 최적밴드비 관계(d-X)에 비선형성을 검토하여 적용하였다. 국내 대하천인 낙동강-황강 합류부에 적용한 결과는 다음과 같다. 첫째, 초분광수심법은 주로 저수심부에서 정밀한 수심맵을 효율적으로 산정할 수 있음을 보여주었고 최대측정가능수심은 통상적 탁도에서 낙동강의 경우 2.5 m로 나타났고, 탁도가 높은 지류의 경우 1.25 m로 나타났다. 둘째, 최대측정가능수심은 초분광수심법 하상 도출 시 다양한 시나리오의 배제수심을 고려하여 산정 및 적용되어야 하고, 이때 최적밴드비기법 적용 시 평균제곱근오차가 기존의 상관도 방식에 비해 최대측정가능수심 산정에 우수하였다. 셋째, 황강 합류부의 탁도가 높아 측정가능수심이 인근 낙동강에 비해 절반으로 낮아져 초분광수심법은 탁도가 높은 환경일 경우 한계가 있음을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.3-46
• /
• 1999

A new method called SRICOS is proposed to predict the scour depth z versus time t around a cylindrical bridge pier of diameter D founded in clay. The steps involved are ; 1. taking samples at the bridge pier site, 2. testing them in an Erosion Function Apparatus called the EFA to obtain the scour rate z versus the hydraulic shear stress applied $\tau$, 3. predicting the maximum shear stress r max which will be induced around the pier by the water flowing at ν Ο before the scour hole starts to develop, 4. using the measured z versus r curve to obtain the initial scour rate zi corresponding to r max , 5. predicting the maximum depth of scour zmax for the pier, 6. using zi and zmarx to develop the hyperbolic function describing the scour depth z versus time t curve, and 7. reading the z vs. t curve at a time corresponding to the duration of the flood to find the scour depth which will develop around the pier. A new apparatus is developed to measure the z vs t curve of step 2, a series of advanced numerical simulations are performed to develop an equation for the $\tau$ max value of step 3, and a series of flume tests are performed to develop an equation for the zmax value of step 5. The method is evaluated by comparing predictions and measurements in 42 flume experiments.