References
- Journal of the JSTP v.28 no.314 Temperature Dependence of Tensile Properties Draw ability of Steel Sheets in Warm Working Condition Tetsuro Ohwue;Hiroshi Takechi;Yoshikuni Furuno
- Journal of the JSTP v.28 no.318 Deep Drawability of Square Shells in Warm Working Condition Tetsuro Ohwue;Hiroshi Takechi;Yoshikuni Furuno
- Proceedings of the First International Conference on New Manufacturing Technology Chiba 1990 WARM PRESS FORMING OF STINLESS STEEL SHEETS Kiyohiko Nohara;Yasuomi Watanabe;Kazunobu Yamahata
- Journal of the JSTP v.33 no.375 ステンレス鋼板の溫間絞り加工法 Yasuomi Watanabe
- Journal of the JSTP v.34 no.390 Finite Element Simulation of Warm Deep Drawing of Type 304 Stainless Steel Sheet with Deformation Induced Transformation Kazunari Shinagawa;Tsutomu Takeoka;Ken-Ichiro Mori;Kozo Osakada
- Journal of Material Processing Technology v.45 The Effect of Tooling Temperature on the Formability of Sheets Steel D. E. Leighton;D. Lee
- Journal of Material Processing Technology v.84 Critical condition of wrinkling in deep drawing at elevated temperature X. M. Zeng;S. M. Mahdavian
- Proceeding of the Fourth International Conference on Technology of Plasticity DEEP DRAWING OF STAINLESS STEEL IN WARM WORKING CONDITION USING A SINGLE CRANK PRESS J. H. Kim;C. S. Choi;B. Y. Jeong;G. H. Lee
- 한국소성가공학회지 v.4 no.4 크랭크 프레스와 유압 프레스에서 스테인리스 강판의 온간 드로잉성 비교 김종호;최치수;나경환
- 한국소성가공학회지 v.8 no.2 알루미늄 합금 박판 비등온 성형공정의 유한요소해석 및 실험적 연구 (제1부:실험) 류호연;김영은;김종호;구본영;금영탁
- 한국소성가공학회지 v.8 no.3 알루미늄 합금 박판 비등온 성형공정의 유한요소해석 및 실험적 연구 (제2부:해석) 김성민;구본영;금영탁;김종호
- 한국소성가공학회지 v.8 no.3 금형의 온도와 처리 상태에 따른 판재의 마찰특성 송광헌;이재동;최이천;서대교