• 마이크로전자및패키징학회지
• /
• 제13권4호
• /
• pp.1-7
• /
• 2006

WLCSP(wafer level chip size package)는 웨이퍼 레벨에서 패키지 공정이 이루어지는 차세대 패키지 중 하나이다. WLCSP는 웨이퍼 레벨에서 패키지 공정이 이루어진다는 특징으로 인하여 웨이퍼당 생산되는 반도체 칩의 수에 따라 그 패키징 비용을 크게 줄일 수 있다는 장점이 있다. 그러나 응력 버퍼 역할을 하는 기판을 없애는 혁신적인 구조로 인하여 솔더 조인트의 신뢰성이 기존의 BGA 패키지에 비하여 취약하게 되는데, 이러한 솔더 조인트 신뢰성에 대하여 반도체 칩과 솔더볼을 연결하는 폴리머 절연층은 열팽창계수 차이에 의해 발생하는 응력을 흡수하는 중요한 역할을 하게 된다. 본 연구에서는 하이닉스에서 개발한 Omega-CSP를 사용하여 솔더볼 배열 변화와 제 1 절연층의 특성에 따른 솔더 조인트의 열피로 특성을 평가하였다. 그 결과 절연층의 특성 변화가 솔더 조인트의 열피로 특성에 주는 영향은 솔더볼 배열 구조에 따라 변화되는 것을 확인하였다.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.54-61
• /
• 2013

강자성체는 자구들의 상호작용으로 인해 잔류 자화가 남게 되는데, 전자전기 산업 및 국방 피탐지 분야에서는 이러한 잔류 자화량을 정밀하게 0으로 만드는 탈자기법이 요구된다. 하지만 현재 수행되는 탈자기법들은 경험과 실험에 의존한 방법들로, 새로운 재료의 개발에 따른 효율적인 탈자를 위해서는 강자성체의 히스테리시스 곡선을 반영한 탈자기법이 필요하다. 본 논문에서는 자성체의 물성적인 성질을 기반으로 정립된 Preisach 모델링 기법을 이용하여 Anhysteretic Deperm, Deperm-ME, Flash-Deperm에 따른 2차원 유한요소해석을 수행하였다. 탈자 전류에 의한 자기이력궤적의 분석을 통해 강자성체의 히스테리시스 곡선과 탈자 변수의 관계를 고찰하였으며, 이로써 탈자에 효율적인 전류 감소 형태를 제시하였다.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.399-406
• /
• 2004

Glass-like carbon precursors shrink significantly during curing and carbonization, which leads to crack formation and bending. Cured furan resin powder and ethanol were added to furan resin to diminish the weight loss, to suppress the shrinkage and bending, and to readily release the gases evolved during polymerization and curing. Curing and carbonization were controlled by pressure and slow heating to avoid damage to the samples. The effect of the filler and ethanol on the fabrication process was examined by measuring the properties of the glass-like carbon, such as the specific gravity, bending strength, electrical resistivity, and microstructural change. The specific gravities of the filler-added glass-like carbons were higher than those of the ethanol-added samples because of the formation of macropores from the vaporization of ethanol during the curing and polymerization processes. Although the ethanol-added glass-like carbons exhibited lower bending strengths after carbonization than did the filler-added samples, the opposite result was observed after aging at 2,600$^{\circ}C$. We found that the macropores created from ethanol were contracted and removed upon heat treatment. The electrical resistivity of the glass-like carbon aged at 2,600$^{\circ}C$ was lower than those of the samples carbonized at 1,000$^{\circ}C$. We attribute this phenomenon to the fact that aging at high temperature led to well-developed microstructures, the removal of macropores, and the reduction of the surface area.

• 접착 및 계면
• /
• 제15권4호
• /
• pp.151-160
• /
• 2014

이상적인 내발수 특성을 얻기 위해 유화중합을 이용하여 n-methyol acrylamide (n-MAM)와 stearyl methacrylate (SMA)의 단량체에 기능성 단량체인 PFOEA의 함량(0-8 wt%)에 따른 공중합체를 합성하였고, 추가적으로 2-(perfluorooctyl) ethyl acrylate (PFOEA) 함량이 4 wt%인 조성에 m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI)의 함량(1~4 wt%)을 첨가한 공중합체를 합성하였다. 유화중합을 위해 비이온 유화제인 tridecyl alcohol (TDA-7), 양이온유화제인 alkyl dimethyl amine derivatives(ADAD)를 사용하였고 개시제로는 2,2'-azobis (2-amidinopropane dihydrochoride) (AAPDL)을 사용하였다. 합성된 공중합체에 대해서 FT-IR spectra를 이용하여 구조분석을 하였고 표면특성 분석을 위해 접촉각, 표면에너지, 발수도 그리고 SEM을 측정하였으며, TGA와 DSC를 사용하여 열적 특성을 확인하였다. PFOEA와 TMI의 특정 함량에서 우수한 발수도와 높은 열적 특성을 보이는 공중합체가 합성됨을 알 수 있었다.

• 접착 및 계면
• /
• 제14권2호
• /
• pp.82-87
• /
• 2013

본 연구에서는 레졸, 질산철 그리고 트리블럭 공중합체를 이용하여 직접 탄화과정에 의해 자성체 나노입자가 분산된 탄소나노세공체를 합성하였다. 나노세공 마그네타이트/카본($Fe_3O_4$/carbon) 나노복합체는 낮은 마그네타이트 함량(1 wt%)을 가지고 잘 배열된 이차원적 육방체 구조(p6mm)를 보이며, 균일한 세공크기(3.6 nm), 높은 표면적(635 $m^2/g$)과 세공부피(0.48 $cm^3/g$)를 가진다. 작은 입자크기(10.2 nm)를 가지는 마그네타이트 나노입자는 초상자기성(7.7 emu/g)을 보이고 탄소 세공벽 내에 잘 분산되었다. 나노세공 마그네타이트/카본 물질은 최대 995 mg/g의 아이부프로펜 흡착량을 보였다. 또한, 자석을 이용하여 용액과 나노세공 마그네타이트/카본 물질의 분리가 용이하였다. 본 연구에서 제조된 나노복합체는 우수한 아이부프로펜 흡착제로 작용하였다.

• 동아시아식생활학회지
• /
• 제15권4호
• /
• pp.475-482
• /
• 2005

As Korea has approached the aging society, older Koreans have become an important force in restaurant sales today. To succeed with this silver market, it is important for restaurant managers to know who they are and which factor influence the older Koreans' eating-out decision making process. The purpose of this study was to investigate the effect of the elderly consumers financial independency on restaurant selection process. Data were collected from 178 older consumers above 55 years old and analyzed using the descriptive statistic analysis, MANOVA, and one-way ANOVA. The results showed that the elderly consumers financial independency significantly influenced the decision making process in determining where they eat out Significant differences were found between high income group and low income group in the Problem Recognition Step(Wilks' Lambda=0.776, F=3.796), Information Search Step(Wilks' Lambda=0.779, F=2.959), Alternative Evaluation Step (I :Wilks' Lambda=0.835, F=1.748/ II :Wilks' Lambda=0.764, F=3.212), and Purchase Decision Step(Wilks' Lambda=0.849, F=2.412), except the Post-Purchase Behavior(Wilks' Lambda=0.933, F=1.179). The more financially independent older consumers were, the more directly they were involved in the eating out decision making process. Older consumers with higher income and more personal property were likely to 'propose to eat out by themselves'(F=10.986), to obtain restaurant information from the 'printed materials'(F=9.707), to consider 'convenient location' as most important factor when they eat out(F=5.594), and to go to 'family restaurant'(F=7.067), 'Japanese restaurant'(F=7.391) and 'fine dining restaurants'(F-=6.382). In conclusion, we found that the elderly consumers financial independency did influence the eating-out decision making process. Considering that older Korean will become a financially independent consumer and will be eating away from home more often, food service operations should actively position themselves for this market and develop the market-driven menus and services to meet their needs and expectations.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2974-2978
• /
• 2014

$Mn_3O_4$/multi-walled carbon nanotube (MWCNT) composites are prepared by chemically synthesizing $Mn_3O_4$ nanoparticles on a MWCNT film at room temperature. Structural and morphological characterization has been carried out using X-ray diffraction (XRD) and scanning and transmission electron microscopies (SEM and TEM). These reveal that polycrystalline $Mn_3O_4$ nanoparticles, with sizes of about 10-20 nm, aggregate to form larger nanoparticles (50-200 nm), and the $Mn_3O_4$ nanoparticles are attached inhomogeneously on MWCNTs. The electrochemical behavior of the composites is analyzed by cyclic voltammetry experiment. The $Mn_3O_4$/MWCNT composite exhibits a specific capacitance of $257Fg^{-1}$ at a scan rate of $5mVs^{-1}$, which is about 3.5 times higher than that of the pure $Mn_3O_4$. Cycle-life tests show that the specific capacitance of the $Mn_3O_4$/MWCNT composite is stable up to 1000 cycles with about 85% capacitance retention, which is better than the pure $Mn_3O_4$ electrode. The improved supercapacitive performance of the $Mn_3O_4$/MWCNT composite electrode can be attributed to the synergistic effects of the $Mn_3O_4$ nanoparticles and the MWCNTs, which arises not only from the combination of pseudocapacitance from $Mn_3O_4$ nanoparticles and electric double layer capacitance from the MWCNTs but also from the increased surface area, pore volume and conducting property of the MWCNT network.

• 동력기계공학회지
• /
• 제20권5호
• /
• pp.29-36
• /
• 2016

Aluminum alloys have been widely used in engine materials, cold & hot-water storage vessels and piping etc., Furthermore, the aluminum alloy of AC8A have been widely used in mold casting material of engine piston for various vehicles because of its properties of temperature, wear and corrosion resistance. Therefore, it is considered that evaluation of corrosion resistance as well as wear resistance of AC8A material is also important to improve its property and to prolong its lifetime. In previous paper, the effect of solution($510^{\circ}C$:4hrs) and tempering($190^{\circ}C$: 16, 24, and 36 hrs)heat treatments to corrosion resistance and hardness were investigated using electrochemical method. In this study, in order to examine completely the effect of the tempering hours to hardness variation and corrosion resistance, the results of solution($510^{\circ}C$:4hrs) and tempering($190^{\circ}C$: 2, 4, 8 and 12hrs)heat treatments to hardness and corrosion resistance were investigated using electrochemical method. The hardness decreased with solution heat treatment compared to mold casting condition, but its value increased with tempering heat treatment. Furthermore, the corrosion resistance increased with decreasing of the hardness, and decreased with increasing of the hardness reversely. And the tempering heat treatment temperature at $190^{\circ}C$ for 8 hrs exhibited the highest value of the hardness and also indicated the highest corrosion current density. However, the values of hardness and corrosion current density was again increasingly decreased with increasing of tempering hours than 8 hrs, Consequently, it is suggested that decision of the optimum. tempering hours is very important to improve the corrosion or wear resistance.

• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.267-274
• /
• 2010

합성구조는 전체가 동일한 재료 특성을 가지는 구조와는 달리 서로 다른 특성 즉 강재와 콘크리트의 구조로 결합되어 있다. 따라서 실제 모델링 시 이러한 재료 특성을 반영하지 않으면 실제 거동을 예측할 수 없으므로 콘크리트와 강재 사이에 인터페이스 요소를 연결하여 강재와 콘크리트의 슬립을 예측할 수 있게 한다. 인터페이스 요소는 일반적으로 사용되는 구성방정식은 적합하지 않고 실제 부착 및 슬립을 고려한 비선형 구성 방정식을 사용하여야만 적절히 사용할 수 있다. 이 계면요소를 이용하여 판형 강재 박스와 콘크리트의 접촉면을 묘사하였다. 그리고 강재 박스의 휨-좌굴 거동을 묘사하기 위해서는 일반적인 8절점 적합 요소의 사용은 부적절하므로 판형 강재 박스는 보강 변형도(Enhanced Assumed Strain) 고체요소를 사용하여 휨거동을 묘사할 수 있게 하였다.

• 소성∙가공
• /
• 제11권8호
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.