• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.578-580
• /
• 2005

Energy distribution function for electrons in SF6-Ar mixtures gas used by MCS-BEq algorithm has been analysed over the E/N range 30~300[Td] by a two term Boltzmann equation and by a Monte Carlo Simulation using a set of electron cross sections determined by other authors, experimentally the electron swarm parameters for 0.2[%] and 0.5[%] $SF_6$-Ar mixtures were measured by TOF method, The results show that the deduced electron drift velocities, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients and mean energy agree reasonably well with theoretical for a rang of E/N values. The results obtained from Boltzmann equation method and Monte Carlo simulation have been compared with present and previously obtained data and respective set of electron collision cross sections of the molecules.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.89-90
• /
• 2006

In this paper, the authors propose the RTDS (Real Time Digital Simulator) simulation method which puts a real HTS (High Temperature Superconducting) tape into the simulated voltage feedback system of HTS tape. To perform the RTDS based simulation, the voltage feedback system of HTS tape with hardware is designed and connected to the RTDS. This simulation method is the world first in order to obtain much better for installation of HTS power cable into a utility network.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.175-181
• /
• 2019

The research and development of high-performance polymer materials with excellent gas barrier properties has gained considerable attention from the viewpoint of expanding their applications in various fields, including tire automobile parts and the polymer film industry. Natural rubber (NR) has been widely used as a rubber material in real-life, but its application is limited owing to its poor gas barrier properties. In this paper, we study the gas barrier properties of NR, epoxidized natural rubber (ENR), and their blend compositions by using molecular simulation. The results show that ENR-50 has superior oxygen barrier properties than those of NR. Moreover, the oxygen barrier properties of a blend of NR/ENR-50 improve with increasing volume fraction of ENR-50. The trend of improved oxygen barrier properties of NR, ENR-50, and their blend is in good agreement with experimental observations.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.226-233
• /
• 2018

Elastomers based on the thermoplastics are widely used in rubber industries. Thermoplastic elastomers have the advantages of an easy shaping process and elimination of recycling problems. Thermoplastic polyester elastomer (TPE) is used for making rubber bands in wearable devices and its applications are increasing. In this study, five wrist bands were designed and their mechanical behaviors were examined by computer simulation, using hyper elastic models, Mooney-Rivlin and Ogden models, and a linear elastic model. Simulation results were compared and discussed in terms of band design and material model.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.196-202
• /
• 2009

Study from Yogyakarta earthquake reconstruction program, cast-in-place wall using fix-size formwork system (Old-CIP) has offered a good alternative for house construction. A simulation has also confirmed that this system using mortar as the main material can provide cheapest cost and lowest total man power compared to conventional wall construction technique: brick or mortar-block wall. This paper presents the new wall construction technique: full size cast-in-place wall (New-CIP). The detail of how this new technique implemented is described. In addition, considering that material and labor cost in one area is different to others, cost analysis for different resources prices and wages of three cities are taken into a simulation. The analysis is aimed to distinguish the implementation feasibility of New-CIP system compared to the four common wall systems. Finally, its implementation resistance is also discussed.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.70-77
• /
• 2015

The purpose of this study was to provide fundamental data for an anchor collision simulation of an FCM (flexible concrete mattress). Numerical material models (elastic-perfectly plastic model, Drucker-Prager model, and RHT concrete model) were compared. ANSYS Explicit Dynamics was used for collision analyses. An FE model was used for the anchor, FCM, andreinforcement bars. The results showed that the behavior of the FCM was verydifferent that those ofthe material models. In particular, the effect of the pressure dependent strength was most noticeable among the properties of concrete.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.6
• /
• pp.443-453
• /
• 2009

The Rayleigh-Taylor instability, the bubble rising in both partially and fully filled containers and the droplet splash are simulated by an in-house solution code(PowerCFD), which are typical benchmark problems among multiphase flows with material interface due to density difference. The present method(code) employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present method simulates efficiently and accurately complex free surface flows such as multiphase flows with material interface due to both density difference and instability.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.136-138
• /
• 2003

Strain states of clad sheets consisted of AL3003 and SUS430 were studied by FEM simulation. Main simulation parameters include roll size, reduction, material properties, material temperature, and friction between roll and material (or friction between materials). To investigate the effect of friction on the evolution of strain states, the friction coefficient between roll and material (or fraction coefficients between materials) was varied. Components of strain rate, strain were compared according to the variation of friction coefficients. And strain states during cladding were compared with those induced by simple rolling process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2110-2117
• /
• 2003

A physics-based material removal model in various scales is described and a feature scale simulation for a chemical mechanical polishing (CMP) process is performed in this work. Three different scales are considered in this model, i.e., abrasive particle scale, asperity scale and wafer scale. The abrasive particle and the asperity scales are combined together and then homogenized to result in force balance conditions to be satisfied in the wafer scale using an extended Greenwood-Williamson and Whitehouse-Archard statistical model that takes into consideration the joint distribution of asperity heights and asperity tip radii. The final computation is made to evaluate the material removal rate in wafer scale and a computer simulation is performed for detailed surface profile variations on a representative feature. The results show the dependence of the material removal rate on the joint distribution, applied external pressure, relative velocity, and other operating conditions and design parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.82-91
• /
• 1997

The major objective of this study is to establish analytical technique in order to analyze the behaviour of semi-solid material considering induction heating of the billet. Induction heating process is analyzed by using commerical finite element software. ANSYS. The finite element program, SFAC2D, for the simulation of deformation in semi-solid state is developed in the present study. The semi-solid behaviour is described by a viscoplastic model for the solid phase, and by the Darcy's law for the liquid flow. Simple compression and closed-die compression process considering induction heating are analyzed, and also it is found that the distribution of initial solid fraction of the billet has an important effect on deformation behaviour of semi-solid material. In order to verify the effectiveness of proposed analytical technique the simulation result is compared with experimental result.