• Membrane Journal
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2011

$BaCo_{0.7}Fe_{0.22}Nb_{0.08}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1,200^{\circ}C$. XRD result of membrane showed single perovskite structure. Leakage and oxygen permeation test were conducted on the membrane sealed by glass ring as a sealing material. The oxygen permeation flux increased with increasing temperature and pressure difference and maximum oxygen permeation flux was $2.3mL/min{\cdot}cm^2$ at $950^{\circ}C$ with $Po_2$ = 0.63 atm of oxygen partial pressure. The oxygen permeation in the condition of air with $CO_2$ (300 ppm) as feed stream decreased as much as only maximum 2.9% in comparison with air feed stream. It indicated $BaCo_{0.7}Fe_{0.22}Nb_{0.08}O_{3-{\delta}}$ membrane is more stable than another membrane for carbon dioxide.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.679-686
• /
• 2014

In this research, the mix proportion of the antiwashout underwater concrete with the mineral admixture was evaluated. It can reduce the amount used of the antiwashout admixture (hereinafter referred to as "AWA") and satisfy the properties of concrete. In addition, the review for the difference of the test and practical affairs were conducted. Optimized unit quantity of water of antiwashout underwater concrete and the amount used of AWA was revealed by $190kg/m^3$, 0.9%/W, respectively. In particularly, the mix design is reduced by 5% than the W/B of target strength even though the W and AWA reduced. Therefore, it will have the economical feasibility and qualities including the material separation, resistance characteristic and compressive strength, and etc. The stable value was shown in 1 point of minute passed in the measurement of the turbidity amounts using the turbidimeter after the checker insertion. However, it needs to be reviewed for the interrelationship between turbidity measuring machine and KCI-AD102 standard method. There were no significant differences of compressive strength of specimens in the water depending on the production methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.250-263
• /
• 2006

Statement of problem: Ti-alloy has been used widely since it was produced in the United States in 1947 because it has high biocompatibility and anticorrosive characteristics. Purpose: The pure titanium, however, was used limitedly due to insufficient mechanical charateristics and difficult manufacturing process. Our previous study was focused on the development of a new titanium alloy. In the previous study we found that the Ti-Ta-Nb alloy had better mechanical characteristics and similar anticorrosive characteristics to Ti-6Al-4V Material and methods: In this study, the cytotoxicity of the Ti-Ta-Nb alloy was evaluated by MTT assay using MSCs(Mesenchaimal stem cells) and L929 cells(fibroblast cell line). The biocompatibility of the Ti-Ta-Nb alloy was performed by inserting the alloy into the femur of the rabbits and observing the radiological and histological changes surrounding the alloy implant. Results: 1. In the cytotoxicity test using MSCs, the 60% survival rate was observed in pure titanium, 84% in Ti-6Al-4V alloy and 95% in Ti-10Ta-10Nb alloy. 2. In the animal study, the serial follow-up of the radiographs showed no separation or migration revealing gradual bone ingrowth surrounding the implants. Similar radiographic results were obtained among three implant groups pure titanium, Ti-6Al-4V alloy and Ti-10Ta-10Nb alloy. 3. In the histologic examination of the bone block containing the implants. the bone ingrowth was prominent around the implants with the lapse of time. There was no signs of any tissue rejection, degeneration, or inflammation. Active bone ingrowth was observed around the implants. In the comparison of the three groups, the rate of bone ingrowth was better in the Ti-10Ta-10Nb alloy group than those in pure titanium group or Ti-6Al-4V alloy group. In conclusion, Ti-10Ta-10Nb alloy revealed better biocompatibility in survival rate of the cells and bone ingrowth around the implants. Therefore we believe a newly developed Ti-10Ta-10Nb alloy can replace currently used Ti-6Al-4V alloy to increase biocompatibility and to decrease side effects. Conclusion: In conclusion, Ti-10Ta-10Nb alloy revealed better biocompatibility in survival rate of the cells and bone ingrowth around the implants. Therefore we believe a newly developed Ti-10Ta-10Nb alloy can replace currently used Ti-6Al-4V alloy to increase biocompatibility and to decrease side effects.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.213-224
• /
• 2016

Non-conventional resource and alternative energy were researched for predicting oil peak. In this study, one of many non-conventional resources, specifically oil-sands, was investigated due to the increasing interest of oil-sands plant modularization in permaforst areas for reducing the construction periods through modular transportation while limiting local construction workers. Hence, tehcnological trends were analyzed for oil-sand plant modularization. Data used were between 1994 and 2015 for patent analysis while targets included Korea, US, Japan, Europe and Canada. Technology classification system consisted of mining, steam assisted gravity drainage(SAGD), separation/upgrading/tailors ponds, module design/packaging, module transportation and material/maintenance. Result of patent analysis, patent application accounts 89% in US and Canada. The main competitive companies were Shell, Suncor and Exxon-mobil. Unlike other oil developments, oil-sands have a long-term stable production characteristic, hence, it is important to ensure the competitiveness of oil-sands for obtaining a patent in the long run.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.51-60
• /
• 2010

A study on the recovery of cobalt and lithium from Lithium Ion Battery(LIB) scraps has been carried out by a physical treatment - leaching - solvent extraction process. The cathode scraps of LIB in production were used as a material of this experiment. The best condition for recovering cobalt from the anode scraps was acquired in each process. The cathode scraps are dissolved in 2M sulfuric acid solution with hydrogen peroxide at $95^{\circ}C$, 700 rpm. The cobalt is concentrated from the leaching solution by means of a solvent extraction circuit with bis(2-ethylhexyl) phosphoric acid(D2EHPA) and PC88A in kerosene, and then cobalt and lithium are recovered as cobalt hydroxide and lithium carbonate by precipitation technology. The purity of cobalt oxide powder was over 99.98% and the average particle size after milling was about 10 lim. The over all recoveries are over 95% for cobalt and lithium. The pilot test of mechanical separation was carried out for the recovery of cobalt from the scraps. The $Co_3O_4$ powder was made by the heat treatment of $Co(OH)_2$ and the average particle size was about 10 ${\mu}m$ after grinding. The recovery was over 99% for cobalt and lithium each other and the purity of cobalt oxide was over 99.98%.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• Parasites, Hosts and Diseases
• /
• v.36 no.1
• /
• pp.7-14
• /
• 1998

In order to understand the action mechanism of polyhexamethylene biguanide (PHMB) to the cyst of Accnthcnloebc on the morphological basis, the cysts of four corneal isolates of Acanthanoebc were treated with minimal cysticidal concentration (MCC) of PHMB and their ultrastructural changes were examined by transmission electron microscopy. The most striking change of cysts treated with PHMB compared with normal cysts was the shrinkage of intracystic amoebae, which resulted in the separation of the plasma membrane of intracystic amoeba from endocystic wall. Subplasmalemmal lipid droplets became irregularly shaped . In severely damaged cysts, cytoplasm was aggregated and organelles were severely deformed. Cytoplasmic materials were leaked out through the damaged plasma membrane. Most cysts showed aggregation of nuclear chromatin material. Number of mitochondrial cristae was also reduced. Ecto- and endo-cystic walls were relatively well tolerated. Findings in the present study revealed that PHMB affected mainly on plasma membrane, but lesser on organellar membrane of intracystic amoeba. It seemed likely that PHMB might kill cystic forms of Accnthamoebc by similar mechanism in which this environmental biocide can damage the cell wall of Escherichia coli by binding with acidic phospholipids.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.116-120
• /
• 2014

Light cycle oil (LCO), one of the by-products of the catalytic cracking gasoline manufacturing process, contains a lot of valuable aromatics. In particular, 2,6-dimethylnaphthalene (2,6-DMN) contained in LCO has been becoming important as the basic material of polyethylene naphthalate plastic and liquid crystal polymer, etc. If it were possible to separate and purify the valuable aromatic hydrocarbons (such as 2,6-DMN) from LCO, which have only been used as fuel mixed with heavy oil, it would be very meaningful in terms of the efficient use of resources. We investigated the high-purity purification of 2,6-DMN by the combined method of melt crystallization (MC) and solute crystallization (SC). The enriched DMN isomer mixtures (concentration of 2,6-DMN : 10.43%) recovered from LCO by distillation-extraction combination and the crystal recovered by MC used as raw materials of MC and SC, respectively. The solvent of SC used was a mixture of methanol and acetone (60 : 40 wt%). The crystal of 2,6-DMN with a high-purity of 99.5% was recovered by MC-SC combination. We confirmed that the MC-SC combination was one of the very useful combinations for the high-purity purification of 2,6-DMN contained in the enriched DMN isomer mixtures.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.3
• /
• pp.210-216
• /
• 2009

This study was performed to compare the effects of immuno-modulating activities of Rhodiola sachalinensis A. Bor. fractionized by consecutive solvent separation. The Cytotoxicity of all fractionized extracts on human kidney cell (HEK293) was lower than crude extracts. Generally, the butanol and chloroform extracts showed less cytotoxicity on about 10.07% and 9.67% than the crude extracts. For human immune B and T cell growth, chloroform fraction showed the highest cell growth compared to the control. The secretion of cytokines (IL-6, $TNF-\alpha$) on human B and T cells were increased by adding chloroform extracts. Also, NK cell growth was significantly improved up to nearly 30% by adding the supernatant of B cell medium grown with the chloroform fraction. It was also found that chloroform fraction could yield higher nitric oxide production from macrophage than untreated control cells. Differentiation of HL-60 cells was increased up to 131.9% after treatment with chloroform fraction extracts, compared to the control. These results indicate that the chloroform fraction of R. sachalinensis have high immune activation activity than others fractions and the crude extracts, implying that this chloroform fractions could be used a new functional material.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.365-374
• /
• 2021

In this study, the effect of enzyme-modified starch used in the preparation of filled hydrogel powder loaded with curcumin (FHP) on redispersibility, thermal and UV stability, and curcumin retention during in vitro digestion was investigated. FHP maintained stability without layer separation when redispersed and showed more stability against UVB than the emulsion powder (EMP). There was no significant difference in the chemical stability of curcumin between rice starch-based filled hydrogel powder (RS-FHP) and enzyme-modified starch-based filled hydrogel powder (GS-FHP). However, the gel matrix of GS-FHP maintained greater stability of lipid droplets in the stomach compared to RS-FHP, thereby improving the retention rate of curcumin after in vitro digestion. GS-FHP could be used as a novel material for developing premixes that require stable formulation and maintenance of functional substances, as it can increase the dispersion stability and retention rate of functional substances after digestion.