• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.357-361
• /
• 2006

The purpose of this study is to provide the basic information and to help producers develop more realistic, idealistic and better environment-friendly interior finishing material by identifying and reducing the awareness and preference about it between the producers and consumers. The following conclusions are based on the above results of analysis. There is a lack of awareness of the environment-friendly interior finishing material and it is urgent to develop the awareness. For the developing the awareness, the government and the authorities concerned have to educate the consumers in order that they choose objective information, have to build information network accessible to them and have to share the reliable information. And in order to get the confidence of consumers, it is necessary to make institutional devices. The scientific study which can be approved in many methods and many NGOs' participation are also needed. Especially in order to meet the consumers' demand, there should be proof of the influence of the interior finishing material on the body and diversity of the design and color of the material.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.325-333
• /
• 2004

To ensure competitiveness in the modern automotive market, material arrangements and information managements should be performed concurrently with new car developments. In automotive general assembly shops, thus, new business workflow and supporting environments are inevitable to reduce the manufacturing preparation time in developing a new car in the manner of concurrent and collaborative engineering. Since complete material arrangements for a whole general assembly system is a huge and complex job, several planners should execute their planning jobs and share information. Therefore, each planner should provide others with his/her results with continuous on-line communication and cooperation. Digital automotive general assembly factory is useful the performing concurrent and collaborative engineering and is essential for material arrangements and information managements systems. In this research, we constructed a sophisticated digital factory of an automotive general assembly shop by measuring and modeling through the parametric 3-D CAD, and a web-based system for concurrent and collaborative material arrangements for automotive general assembly via 3D mock-up is developed. By the digital general assembly shop and developed web-based system, savings in time and colt of manufacturing preparation activities are possible, and the reliability of the planning result Is greatly improved.

• KNOM Review
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2021

With the spread of the Internet, users can easily receive various services and exchange information through the web. There are several requirements for building a web system, and it must be developed using a programming language or platform for user purposes. Residual material information refers to information on medicines and pesticides added to food, and residual material standards are used to measure the level of residues in food produced by companies and farmers to determine whether those levels meet domestic or international standards. Currently, the Ministry of Food and Drug Safety provides residual acceptance standards for food additives, including food, pesticides and animal medicines, in the form of documents, which must be serviced smoothly and conveniently by users through the establishment of a web system. It must also meet a variety of requirements, including user accessibility, such as scalability and compatibility. This paper proposes react-based residual material information web system that allows users to access more conveniently and receive residual material information smoothly. We measured the speed for the three inportant functions of information provision and compared them with existing residual material information web systems and qualitatively evaluated the seven essential requirements: scalability, compatibility, and accessibility.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.4
• /
• pp.145-150
• /
• 2004

We have investigated the structural, electrical and optical properties of Al-doped ZnO (AZO) thin films grown on glass substrate by pulsed DC magnetron sputtering as functions of pulse frequency and substrate temperature. A highly c-axis oriented AZO thin film is grown in perpendicular to the substrate when pulse frequency of 30 kHz and substrate temperature of $400^{\circ}C$ was applied. Under this optimized growth condition, the resistivity of AZO thin films exhibited $7.40\times 10^{-4}\Omega \textrm{cm}$. This indicated that the decrease of film resistivity resulted from the improvement of film crystallinity. The optical transmittance spectra of the films showed a very high transmittance of 85∼90 % in the visible wavelength region and exhibited the absorption edge of about 350 nm. The results show the potential application for transparent conductivity oxide (TCO) thin films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.526-529
• /
• 2002

Various fluoride films on a glass substrate were prepared and characterized in order to determine the best seed layer for a microcrystalline silicon (${\mu}c$-Si) film growth. Among the various group-IIA-fluoride systems, the $CaF_2$films on glass substrates illustrated (220) preferential orientation and a lattice mismatch of less than 0.7% with Si. $CaF_2$ films exhibited a dielectric constant between $4.1{\sim}5.2$ and an interface trap density ($D_{it}$ as low as $1.8{\times}10^{11}\;cm^{-2}eV^1$. Using the $CaF_2$/glass structure, we were able to achieve an improved ${\mu}c$-Si film at a process temperature of 300 $^{\circ}C$. We have achieved the ${\mu}c$-Si films with a crystalline volume fraction of 65%, a grain size of 700 ${\AA}$, and an activation energy of 0.49 eV.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.103-118
• /
• 2006

At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed using 2D drawings, based on the data of parent ships, and subjective intuition from past experience. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection based on the initial hull structural model(3D CAD model), were developed in this study. Here, the initial hull' structural model was generated from the initial hull structural CAD system early developed by us. To evaluate the developed methods. these methods were applied to corresponding processes of a deadweight 300,OOOton VLCC. As a result. it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.25.2-25.2
• /
• 2009

Vertically aligned zinc oxide(ZnO) nanorods (NRs) with different surface morphology were grown by metal organic chemical vapor deposition (MOCVD) on sapphire substrate with different deposition condition. Based on the surface morphology, ZnO nanostructures are divided into three types: nanoneedles, nanonails and nanorods with rounded tip. Variable temperature photoluminescence (PL) have employed to probe the exciton recombination in high density and vertically aligned ZnO Nanorod arrays. Low temperature photoluminescence measurements do not show any significant yellow emission, but the near band edge excitonic emission shows very strong dependence with the surface morphology. The recombination properties are expected to be different due to different surface-to-volume ratio and distribution of potential fluctuations of intrinsic defects.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.609-612
• /
• 2004

Geometric shape in a surface material sometimes produces different slopes that have different illuminations. It causes some difficulties to get same classification results or to identify as an object for the different facets in a surface material. A regression method is suggested to adjust the spectral information of different facets in a surface material using image segments. The method to adjust spectral information in a building facets was very successful. The most important advantage of this method is to keep the intensity of spectral information as well as spectral response. This method can also be implemented in an adaptive way.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.613-616
• /
• 2008

We report on electrical and optical properties of flexible ITO electrode grown on PET substrate using a specially designed roll-to-roll facing target sputtering (R2R FTS) system at room temperature without conventional cooling drum. Due to effective confinement of high density plasma between ITO targets, we can grow a flexible ITO electrode without cooling drum at room temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.148-148
• /
• 2010

Measuring the a-IGZO TFTs with various temperatures was found to induce a threshold voltage shift and a change of the subthreshold gate voltage swing. Characteristic change is dependant on a material of the substrate at the temperature from $20^{\circ}C$ to $100^{\circ}C$. The threshold voltage was shifted to the left from -2.7V to -61V on SiO2/galss. But, as the temperature increases form $20^{\circ}C$ to $100^{\circ}C$. the threshold voltage was shifted to the right from 0.85V to 2.45V.