• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.26-31
• /
• 2007

Nanocomposite resin(PUD-CNT) composed of Carbon nanotube(CNT) and Polyurethane Dispersion (PUD) was prepared by different contents of CNT($0{\sim}5%$). PUD-CNT was coated on samples, and their electrical conductivity was investigated. With increasing CNT content, static change, half life and surface resistance decreased. Composites having 5% CNT showed $10^9{\Omega}/cm$(surface resistance), and 40V (stactic charge). Respectively, From this results, PUD-CNT can be used as a antistatic material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.381-382
• /
• 2008

$TiO_2$ colloidal solution was electrosprayed for preparing a conductive thin film with high quality. Electrospray is a technique of liquid dispersion electrically and a good method of manufacturing nanoparticle, nanofiber, porous membrane, film preparation and coating. Water and ethanol were used as solvents and their mixing ratio was varied for studying the influence of solvent volatile on nanoparticle dispersion. Various nozzles to control the thru-put of solutions.were examined. Integrated analytical method and scanning electron microscope were used to analyze integrity and microscopic images.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.195-198
• /
• 2014

In this paper, a measurement method to obtain the optical properties of a liquid base on a side-polished single mode fiber was proposed and demonstrated. The device showed periodic resonance coupling against wavelengths. The refractive index and dispersion characteristics of a liquid were calculated by use of the spacings of periodic resonance wavelengths of the device. The thermo-optic coefficient of the liquid was obtained by monitering the shift of resonance wavelengths of the devices with change of environmental temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.53-58
• /
• 2013

Graphene-based polymer nanocomposites are very promising candidates for new high-performance materials that offer improved mechanical, barrier, thermal and electrical properties. Herein, an approach is presented to improve the mechanical, thermal and electrical properties of unsaturated polyester resin (UPR) by using graphene nano sheets (GNS). The extent of dispersion of GNS into the polymer matrix was also observed by using the scanning electron microscopy (SEM) which indicated homogeneous dispersion of GNS through the UPR matrix and strong interfacial adhesion between the GNS and UPR matrix were achieved in the UPR composite, which enhanced the mechanical properties. The tensile strength of the nanocomposites improved at a tune of 52% at a GNS concentration of 0.05%. Again the flexural strength also increased around 92% at a GNS concentration of 0.05%. Similarly the thermal properties and the electrical properties for the nanocomposites were also improved as evidenced from the differential scanning caloriemetry (DSC) and dielectric strength measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.208-211
• /
• 2000

We prepared Co-Cr-Ta and Co-Cr-Ta/Ti thin film for perpendicular magnetic recording media by facing targets sputtering system (FTS system). Ti underlayer effects on crystallographic and magnetic characteristics of Co-Cr-Ta perpendicular magnetic recording media have been investigated. Crystallgraphic and magnetic characteristic of prepared thin films were evaluated by x-ray diffractometry(XRD), vibrating sample magnetometer(VSM) and kerr hysteresis loop measurement. The coercivity and anisotropy field increase by introduced Ti underlayer when substrate temperature is higher than 150$^{\circ}C$. The c-axis dispersion angle and grain size of Co-Cr-Ta/Ti thin film is decrease than Co-Cr-Ta when substrate temperature is higher than 100$^{\circ}C$. Consequently, the use of a Ti underlayer highly orientated can be improved crystallographic and magnetic characteristics of Co-Cr -Ta perpendicular media layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.81-82
• /
• 2006

The purposes of the present study are to produce a high thermal efficient of oil-based nanofluids which can be used as ultra-high voltage transformer oil, and to investigate their thermal and physical properties under static and dynamic conditions. Three kinds of nanofluids are prepared by dispersing $Al_2O_3$ or AlN nanoparticles in transformer oil. The thermal conductivities of the nanoparticles-oil mixtures increase with temperature, particle volume concentration and thermal conductivity of solid particle itself. It was quite important to eliminate $H_2O$ as byproducts of esterification and excess oleic acid which did not form stable chemical bonds with powder surface to get high dispersion stability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.222-223
• /
• 2006

고전압 전기기기의 열화는 여러 가지 요인에 의해 발생한다. 따라서 여러 환경 요인에 영향을 비교적 적게 맡는 절연재료 개발에 의한 절연성능 항상은 그동안 많은 연구자들의 관심의 대상이 되어왔다. 최근 고분자 수지 내에 나노 크기의 충진제를 혼합하여 절연성능 및 기계적, 열적 특성을 향상시키는 연구가 점차 활성화되고 있다. 그러나 나노 크기 입자의 활용은 분자단위 크기의 입자가 가지는 Van der Waals력의 문제로 인하여 전기기기의 절연재료로 활용하기에는 어려운 점이 나타나고 있다. 본 논문에서는 에폭시/$SiO_2$ 나노복합재료를 제조하여 분산시간에 따른 입자의 문산 상태를 살펴보았다.

• 한국광학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2003

유기발광물질 Alq$_3$ 복소굴절률을 양자역학적 흡수이론인 바탕인 포로히-블루머(Forouhi-Bloomer) 분산식[Phys. Rev. B 34. 7018(1986)]을 이용하여 1.5~6 ev의 영역에서 계산하였다. 분광광도계를 이용하여 측정한 Alq$_3$ 박막의 흡수 스펙트럼에서 흡수 피크의 위치와 폭으로부터 포로히-블루머 분산식의 변수 $A_{i}$ , B$_{i}$, $C_{i}$ 의 초기 근사값을 결정하였다. 기판으로 사용한 비정질실리카(fused silica)의 굴절률은 분광광도계로부터 측정된 투과율과 반사율 스펙트럼으로부터 셀마이어(Sellmeier)분산식을 적용하여 계산하였다. 기판의 굴절률과 분광광토계에서 측정한 Alq$_3$박막의 투과율과 반사율 스펙트럼에 포로히-블루머 분산식을 이용한 비선형 최소자승법 곡선맞춤을 하여 Alq$_3$의 복소굴절률을 계산할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• 비파괴검사학회지
• /
• 제26권4호
• /
• pp.239-245
• /
• 2006

이방성을 지닌 복합재료에서 측정한 군속도와 램파 방정식을 이용하여 계산한 군속도는 서로 일치하지 않는다. 이러한 차이는 이방성 재료에서 군속도 방향과 위상속도 방향이 서로 일치하지 않는 현상에서 기인된 것이다. 본 연구에서는 램파 분산방정식을 이용하여 이방성을 지닌 단일방향, 양방향, 준등방성 복합재료 판에서 $S_0$모드 위상속도곡선을 전파 방향 변화에 따라 구하고, 위상속도의 역수 값으로 구성되는 slowness surface를 이용하여 군속도의 방향과 크기를 결정하였다. 이와 같이 계산된 군속도는 측정한 군속도와 잘 일치함을 확인하였다.