• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.30-38
• /
• 2003

High-speed machining is one of the most effective technology to enhance productivity especially for hardened die material. High-speed machining can give great advantages for machining of dies and molds. But selection of machining condition is very difficult because of complicated machining mechanism. This paper presents the selection of machining condition in high-speed machining of STD11. Depth of cut, feed rate and spindle revolution are control factors. The effect of the control factors on surface roughness and machining error in Z-direction is discussed to improve machining accuracy.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2000

In order to perform a successful material cutting process, the operators are to select the suitable machining tools and cutting conditions for the cutting environment. Up to now, this has been a complicated procedure done by the data in the tool manufacturers' paper catalog and the operator's experiencial knowledge, so called heuristics. This research is motivated by the fact that using computer techniques in processing vast amount of data and information, the operator can determine the tool and cutting condition easily. In the developed program, the selection of milling cutter, insert, and components are combined to provide optimal cutting speed, depth of cut, feed rate, rpm, and power. This program also provides the selection routine for end mill, drilling, turning, and grinding where the suitable tools are selected by workpiece, holder type, cut type, and insert shape.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.95-106
• /
• 2008

Eco-friendly material and implementation methods have become important along with the existing standardized maintenance concept for the irrigation and flood control. However, the intrinsic function of the hydraulic structure is water supply and disaster prevention. Therefore, the material and work methods should be considered both eco-friendliness, durability and safety which are prerequisite elements to maintain the engineering function. In this study eco-friendly material and work methods would be classified into the vegetation based system, eco-friendly concrete system and stone-material system according to the characteristics of material. The quality standard for durability followed KS specification and related regulations. The quality standard for safety and eco-friendliness was set after literature review, and the database was developed using the standard. The structure applicable to onsite - the eco-friendly material and work method were classified based on the function and material of the hydraulic structure. Finally, database has been established for convenient management and selection of the proper material and work method. The eco-friendly material and work method could be searched easily for the convenience of the users, and the web-based data system has been developed for continuous registration of the material and work methods to be developed in the future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.501-507
• /
• 1997

Composite material has very excellent mechanical properties including tensile stress and specific strength. Especially impact loads may be expected in many of the engineering applications of it. The suitability of composite material for such applications is determined not only by the usual paramenters, but its impactor energy-absorbing properties. Composite material under impact load has poor mechanical behavior and so needs tailoring its structure. Genetic algorithms(GA) is probabilistic optimization technique by principle of natural genetics and natural selection and neural networks(NN) is useful for prediction operation on the basis of learned data. Therefore, This study presents optimization techniques on the basis of genetic algorithms and neural networks to minimum stiffness design of laminated composite material.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.791-792
• /
• 2006

In motor design, an important factor is the content of silicon in coss material, which can effect the saturation of magnetic circuit and coss loss. While the content of silicon is high, the core loss will be reduced. At the same time, in order to assure the effective flux, the magnetizing current must be increased and then the copper loss becomes higher. Therefore the material with high content of silicon, which is used in the motor, can not always give the high efficiency. In this paper flux linkage of two different material s10 and s60 is compared according to the operating region and then exciting current to obtain same flux is estimated. By comparing core loss and copper loss between two material with the estimated current and flux linkage, this paper presents a criterion in determining the material for higher efficiency

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2047-2052
• /
• 2004

Inconel-600 alloy has been used as steam generator tube material for current pressurized water reactors (PWRs). The long-term operation of steam generators showed that the use of this material induced localized corrosion damages and increased tube wear of steam generator. To protect these problems, steam generator tube material is being changed to Inconel-690 alloy. Based on the current trend, we have chosen Inconel 690 as the Advanced Power Reactor 1400 (APR1400) steam generator(SG) tube material and performed the design optimization of preventive measure against tube fretting wear for the APR1400 steam generator. In this paper, we examined the technical consideration in this modification : the selection of material, wear characteristics, effect of the Egg-crate Flow Distribution Plate installation, and effect analysis of vertical strip installation.

• Genomics & Informatics
• /
• v.10 no.2
• /
• pp.81-87
• /
• 2012

Large-scale copy number variants (CNVs) in the human provide the raw material for delineating population differences, as natural selection may have affected at least some of the CNVs thus far discovered. Although the examination of relatively large numbers of specific ethnic groups has recently started in regard to inter-ethnic group differences in CNVs, identifying and understanding particular instances of natural selection have not been performed. The traditional $F_{ST}$ measure, obtained from differences in allele frequencies between populations, has been used to identify CNVs loci subject to geographically varying selection. Here, we review advances and the application of multinomial-Dirichlet likelihood methods of inference for identifying genome regions that have been subject to natural selection with the $F_{ST}$ estimates. The contents of presentation are not new; however, this review clarifies how the application of the methods to CNV data, which remains largely unexplored, is possible. A hierarchical Bayesian method, which is implemented via Markov Chain Monte Carlo, estimates locus-specific $F_{ST}$ and can identify outlying CNVs loci with large values of FST. By applying this Bayesian method to the publicly available CNV data, we identified the CNV loci that show signals of natural selection, which may elucidate the genetic basis of human disease and diversity.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.263-268
• /
• 2008

Bacterial leaf pustule (BLP) caused by Xanthomonas axonopodis pv. glycines is a serious disease to make pustule and chlorotic haloes in soybean [Glycine max (L). Merr.]. While inheritance mode and map positions of the BLP resistance gene, rxp are known, no sequence information of the gene was reported. In this study, we made five near isogenic lines (NILs) from separate backcrosses (BCs) of BLP-susceptible Hwangkeumkong $\times$ BLP-resistant SS2-2 (HS) and BLP-susceptible Taekwangkong$\times$ SS2-2 (TS) through foreground and background selection based on the four-stage selection strategy. First, 15 BC individuals were selected through foreground selection using the simple sequence repeat (SSR) markers Satt486 and Satt372 flanking the rxp gene. Among them, 11 BC plants showed the BLP-resistant response. The HS and TS lines chosen in foreground selection were again screened by background selection using 118 and 90 SSR markers across all chromosomes, respectively. Eventually, five individuals showing greater than 90% recurrent parent genome content were selected in both HS and TS lines. These NILs will be a unique biological material to characterize the rxp gene.

• Journal of Technologic Dentistry
• /
• v.10 no.1
• /
• pp.171-175
• /
• 1988

A good material selection and high dental techniques shall be required in all procedure from waxing up to investing of wax patten in order to get a cast restoration with good adaptability. Generally, wax and investing material should not have any deformation property but they art not so perfact in practice. Therefore, as the one of methods to produce more perfact, less deformation property and excellent product, it is necessary to eliminate the problems which can cause a deformation in each procedure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.257-262
• /
• 1996

The first purpose of this study investigates the influence of stiffening on the acoustic response of stiffened plates, which are often employed in steel structures. And the radiation efficiency is measured by average mean square velocity and sound intensity of stiffened plates. The second, it determines influence of mass, damp and stiffeness due to the partial adhesive visco-elastic material to reduce radiated sound power.