• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2001

In this paper, the effect of grain refinement on room temperature ductility of copper was addressed. Recent experimental results have shown that this material, as well as a number of other single-phase metals that are ductile when coarse-grained, loose their ductility with decreasing grain size in the sub micrometer range. A recently developed model in which such materials are considered as effectively two-phase ones (with the grain boundaries treated as a linearly viscous second phase) was applied to analyze stability of Cu against ductile necking. As a basis, Hart's stability analysis that accounts for strain rate sensitivity effects was used. The results confirm the observed trend for reduction of ductility with decreasing grain size. The model can be applied to predicting the grain size dependence of ductility of other metallic materials as well.

• 산업공학
• /
• 제12권1호
• /
• pp.121-131
• /
• 1999

In this article, a simulation model of a microwave oven assembly line is developed to identify system parameters to improve the system performances such as work-in-process inventories, production lead time, mean earliness, mean tardiness and in-time completion rate. System parameters investigated include dispatching rules, lot sizing, setup time reduction, demand increase, productivity improvement, production scheduling, hardware characteristics, etc. The model has been developed using SIMAN simulation language which has been demonstrated to be a powerful tool to simulate complex manufacturing systems. We have suggested the results obtained to improve the system performances of an existing production line.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.52-59
• /
• 2002

Resently, reduction of industrial products in size and weight has increased by the application of micro-drill for gadgets of high precision and gave rise to a great interest in a micro-drilling. Due to the lack of tool stiffness and the chip packing, micro-drilling requires not only the robust tool structure which has not affected by the vibration, but also the effective drilling methods designed to prevent tool fracture from cutting troubles. Firstly, this paper presents a optimum characteristic evaluation method of 0.15mm microdrill in consideration of new manufacturing processes for improving the product rate and extend the tool life, and secondly suggest between microdrilling characteristic properties of tool md evaluation of workpiece quality through experiment.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.101-106
• /
• 2010

The purposes of this paper are to investigate an effect of weight of material and gender on postural stability and to introduce formulas for those. There were five levels of weights 0, 9, 18, 27 and 36 kg, and two levels of genders were conducted. Eight male and five female subjects participated in this experiment, ten tests were performed for each level of weights to measure the postural stability by using the stability platform. The effect of the genders and the load on the postural stability were statistically analysed by the two way ANOVA test and the regression analysis. The ANOVA test showed that the effect of weights was statistically significant on postural stability to the both male and female subjects. And the postural stability of female subjects was better than that of male subjects. A linear regression formula for the balancing time and the load and a formula for the reduction rate postural stability and the relative load were introduced by the regression analysis.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.

• Transactions on Electrical and Electronic Materials
• /
• 제15권1호
• /
• pp.12-15
• /
• 2014

At the moment of transformer energization by the supply voltage, a high current called transient inrush current, which may rise to ten times the transformer full load current, could be drawn by the primary winding. This paper discusses a microcontroller circuit with the intention of controlling and limiting the inrush current for a transformer, by the method of ramping up the supply voltage feeding to the transformer primary. Simulations and the experimental results show a significant reduction of inrush current, when the ramping up voltage is applied to the three-phase transformer load. The inrush current could be almost eliminated if the correct switching step rate is chosen.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.22-29
• /
• 2004

As a result of high integration of semiconductor device, the global planarization of multi-layer structures is necessary. So the chemical mechanical polishing(CMP) is widely applied to manufacturing the dielectric layer and metal line in the semiconductor device. CMP process is under influence of polisher, pad, slurry, and process itself, etc. In comparison with the general CMP which uses the slurry including abrasives, fixed abrasive pad takes advantage of planarity, resulting from decreasing pattern selectivity and defects such as dishing & erosion due to the reduction of abrasive concentration especially. This paper introduces the manufacturing technique of fixed abrasive pad using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. And the tungsten CMP using fixed abrasive pad achieved the good conclusion in terms of the removal rate, non-uniformity, surface roughness, material selectivity, micro-scratch free contemporary with the pad life-time.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.389-393
• /
• 2012

Improvement in microwave absorbance has been investigated by insertion of a periodic air cavity in rubber composites filled with magnetic powders. A mixture of $Co_2Z$ hexagonal ferrite and Fe powders were used as the absorbent fillers in silicone rubber matrix. The complex permeability and complex permittivity of the magnetic composites were measured by reflection/transmission technique. In the grid-type magnetic absorbers, the equivalent permeability (${\mu}_{eq}$) and permittivity (${\varepsilon}_{eq}$) are calculated as a function of air volume rate (K) on the basis of effective medium theory. Reduction in the material parameters (especially, dielectric permittivity and magnetic loss) has been estimated with the increase of K. Plotting the ${\mu}_{eq}$ and ${\varepsilon}_{eq}$ on the solution map of wave-impedance matching, wide bandwidth microwave absorbance has been predicted in the magnetic composites with an optimum value of K.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.95-104
• /
• 2017

Among the industrial disasters caused by drop, ladder related drop disasters are occurred the mostly. The victims are occurred continuously. This study analyzed current situation of industrial disasters for recent 10 years(2005~2014) and compared analyzed statistics of death disasters of ladder by workplace scale, age, occupation, employment type, working content, scarred area, etc. in detail. This study suggested direction of safety standard modification for ladder that is an original cause material of many drops, direction of safety training strengthening of small-scaled workplace, and safety model based on disaster statistics and should contribute to reduction of disaster rate for ladder working.

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.336-341
• /
• 2011

Recently, aluminium usage in the automobile industry has been increased cause of its lightweight. The aluminium has a melting-solidification process in producing line and another melting process was needed in manufacturing process. Two times of melting process for making ingot and casting not only makes the loss of time and money but contaminates the air with Sox, Nox. For this reason, the holding furnace with laminated adiabatic material was developed. This holding furnace can deliver the molten aluminium directly to the industry needing molten aluminium. Recent holding furnace has above $15^{\circ}C/h$ of cooling rate and that causes solidification of molten aluminium. The ANSYS software was used to analysis the heat transfer. The adiabatic materials were laminated with optimized arrangement and holding furnace shape was changed with optimized modelling by ANSYS analysis for reducing the cooling rate of molten aluminium in holding furnace.