• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.762-766
• /
• 2013

Interest in Wireless Power Transmission (WPT) technology has been increasing worldwide recently. This trend is proved by commercialized products such as electric toothbrush, wireless razor, and wireless charger for mobile phone battery. Studies for enhancing the applicability of the technology have been continuously conducted. Currently the WPT technology is based on the technologies using microwave, inductively coupling, and magnetic resonance. In the meantime, development of the microwave-based WPT faces difficulty due to health hazards involved in the technology, and application of the WPT technology using inductively coupling is restricted by area due to the problem of transmission length. In comparison, the WPT technology using magnetic resonance draws attention in terms of efficiency and transmission length. In this study, the sending coil based on the WPT technology using magnetic resonance system was replaced with an HTS coil to enhance transmission efficiency. Since the HTS coil has a zero resistance, power transmission loss can be minimized. At the same time, size of the current density could be increased to 100 times or more than typical coils. In addition, through impedance matching of LC device, maximal resonance properties were induced and consequently, frequency selection quality characteristics or Q was enhanced. As a result, the WPT type using the HTS coil showed a longer transmission length and better transmission efficiency compared with the WPT type using typical coils.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.1124-1131
• /
• 2016

In this study, the global proteome of the IPEC-J2 cell line was evaluated using ultra-high performance liquid chromatography coupled to a quadrupole Q Exactive^™ Orbitrap mass spectrometer. Proteins were isolated from highly confluent IPEC-J2 cells in biological replicates and analyzed by label-free mass spectrometry prior to matching against a porcine genomic dataset. The results identified 1,517 proteins, accounting for 7.35% of all genes in the porcine genome. The highly abundant proteins detected, such as actin, annexin A2, and AHNAK nucleoprotein, are involved in structural integrity, signaling mechanisms, and cellular homeostasis. The high abundance of heat shock proteins indicated their significance in cellular defenses, barrier function, and gut homeostasis. Pathway analysis and annotation using the Kyoto Encyclopedia of Genes and Genomes database resulted in a putative protein network map of the regulation of immunological responses and structural integrity in the cell line. The comprehensive proteome analysis of IPEC-J2 cells provides fundamental insights into overall protein expression and pathway dynamics that might be useful in cell adhesion studies and immunological applications.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.791-796
• /
• 2020

In this paper, "Q-Bone", a 3^rd generation blockchain platform with enhanced security and flexibility, was developed. As a 3^rd generation blockchain platform, it exploits BP (block producer) to increase processing speed. It has many advantages as follows. It improves both security and speed by mixing RSA (Rivest-Shamir-Adleman) and AES (advanced encryption standard). It improves flexibility by exploiting gateway to convert between apps and blockchain with different programming language. It increases processing speed by combining whole transactions into one block and distribute it when too many transactions occur. It improves search speed by inserting sequence hash into transaction data. It was implemented and applied to pet communication service and academy-instructor-student matching service, and it was verified to work correctly and effectively. Its processing speed is 3,357 transactions/second, which shows excellent performance.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.641-644
• /
• 1998

In this paper, wideband MMIC LNA's were designed using low Q matching network. gains of 23.6~25.4dB $(24.5\pm0.9dB),$ noise figures of 0.9~2.8 dB were obtained from the designed wideband MMIC LNA in the frequency ranges of 1.2~2.8㎓. And, P1dB of 10.13 dBm, IP3 of 12.25 dB were obtained at the center frequency of 2 ㎓. A chip size of the designed wideband MMIC LNA is 1.4mm$\times$1.4mm.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.62-68
• /
• 1998

Optical broadband second harmonic genration (SHG) in thin film waveguide structure was investigated. The copolymer poly(MMA-co-DR1MA) which was consiste dof PMMA (polymethylmethacrylate) and DR 1 (disperse red 1) was spin coated on the pyrex substrate. The green and near UV SHG were observe dfrom the fundamental beam even though the poled polymer has the absorption in second harmonic wavelength range. It was able to genrate SHG by cerenkov type phase matching. Th epoled polymer film thickness was decided by theoretical analysis. The green (532nm) and near UV SHG (370nm) were observed from the Q-switched Nd-YAG laser (1064nm) and Ti-sapphire laser (740nm). It was in good agreement with the experimental results.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.7
• /
• pp.1691-1716
• /
• 1998

본 논문에서는 계층적 블록매칭 알고리즘(HBMA)을 위한 두 가지 병렬 VLSI 아키텍쳐를 제안한다. HBMA는 계층에 따른 반복수행과 공간 인터폴레이션을 기반으로 수행되며, 이러한 수행 특성은 병렬처리의 장애요소인 데이터 종속성을 내재하고 있다. 제안된 아키텍쳐는 HBMA의 계층간 데이터 종속성을 해결하기 위하여 기본적으로 파이프라인 구조를 채택하고 있으며, HBMA에서 주어진 매개변수에 따라 세 단계의 스테이지로 구성된다. 제안된 아키텍쳐는 입력 프레임 데이터의 흐름을 제어하는 방식에 따라 두 가지 종류로 구분된다. U-Architecture는 단방향 스캔 순서를 따르도록 설계되었으며, B-Architecture는 양방향 스캔 수서를 따르도록 설계되었다. 각 아키텍쳐의 내부 메모리와 인터폴레이션 모듈은 해당 스캔 순서에 따라 동기적으로 동작할 수 있는 구조를 가진다. 성능분석의 결과로서 본 논문에서 제안한 두 가지 아키텍쳐가 모두 방송용 비디오 포맷을 실시간으로 처리할 수 있음을 보이고, HDTV 포맷은 가까운 장래의 VLSI 기술로 실시간 성능을 얻을 수 있음을 보였다. 또한, B-Architecture는 공간 연결성 내부 메모리 구조를 채택함으로써 입력 데이터의 재활용도를 높이고, 이에 따라 Q-Architecture에 비해서 데이터 입출력 핀의 개수를 약 반정도 줄일 수 있는 특성을 보이고 있다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.121-124
• /
• 2000

In mobile communication repeaters, very small size with sharp skirt response is needed as the BPF performances. The passband flatness of the proper BPF becomes very bad due to the low value of the resonator Q-factor used in the BPF. Which could girt serious level unbalance between channels. This flatness problem can he solved by a kind of compensated filler, which has 'reverse-curve'or 'concave shape'as the passband response. In this paper, the design method of the proposed 'concave bandpass filter'without matching and loss problems is presented. The designed and fabricated filter can properly and easily compensate the convex or bad flat passband response.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1572-1580
• /
• 1995

In this paper, a modified Chebyshev low-pass filter function is proposed. The modified Chebyshev filter function exhibits ripples diminishing toward .omega. = 0 in the passband. So, the modified filter function is realizable in the passive doubly-terminated ladder network for the order n even or odd, thus lending itself amenable to active RC or switched capacitor filters through the simulation techniques. Besides the passive doubly-terminated ladder realizability, lower pole-Q values of the modified function are accountable for improved phase and delay characteristics, as compared to classical function. We have designed the 6th order passive doubly-terminated network using the modified function. And then a continuous-time DDA(Differential Difference Amplifier) filter, which has no matching requirement, is realized by leap-frog simulation technique for fabrication. In the HSPICE simulation results, we confirmed that the designed continuous-time DDA filter characteristics are agreement with the passive filter.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1244-1254
• /
• 2015

This paper proposes a new method for tuning a linear quadratic - proportional integral derivative controller for second order systems to simultaneously meet the time and frequency domain design specifications. The suitable loop-shape of the controlled system and the desired step response are considered as specifications in the time and frequency domains, respectively. The weighting factors, Q and R of the LQ controller are determined by the algebraic Riccati equation with respect to the limiting behavior and target function matching. Numerical examples show the effectiveness of the proposed LQ-PID tuning method

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.266-272
• /
• 1992

A coherent anti-Stokes Raman spectroscopy (CARS) technique is applied to measure temperature profile in a flame. The CARS signal is obtained with BOXCARS phase matching to get better spatial resolution. A program routine for calculating temperature of the flame from the measured CARS spectra is studied. The routine includes the line broadening mechnism of the molecules described with a modified energy gap (MEG) law by using the perturbation theory. We have found that the temperature profile obtained with the MEG law is properly fit with the results measured with a thermocoulpe and calculated with the adiabatic theory.