• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.652-655
• /
• 2003

In this paper, step-down piezoelectric transformer is studied. The piezoelectric transformer, made of lead zirconate titanate solid solution ceramic, is operated by a fundamental contour-extensional vibration mode. The transformer of 14mm length, 14mm width and 4.5mm thickness was made up two shape(Type I and II). The resonant frequency (fr) is 144kHz and 128kHz at the load resistant of $7.5{\Omega}$ that is a similar to calculating matching impedance. The gain (G) obtained 0.19 and 0.08 at each resonant frequency, when applied input voltage is 25V. The temperature difference with the variation of load resistant was increased with increasing load resistant and was the lowest at $7.5{\Omega}$ near the matching of output impedance.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.169-172
• /
• 2001

This paper has been studied a calibration techniques for monopole antenna in the frequency range 150 KHz to 30 MHz. The long wavelength associated with the low frequency, methods used to calibrate or characterize antennas at higher frequencies are not applicable. The equivalent capacitance substitution method uses a dummy antenna in place of the actual rod element See figure 1. for guidance in making a dummy antenna. Set up the matching network to be characterized and the measuring equipment as shown in Figure 2. Subtract the measured output of the matching network from the measured output of the signal generator and subtract -6 dB(for the 1 m rod). Measurements made at a sufficient number of frequencies number of frequencies to obtain a smooth curve of antenna factor.(fig 5.)

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.178-182
• /
• 2013

We have developed a new non-conventional electron paramagnetic resonance (EPR) spectrometer, in which no resonant cavity was used. We previously demonstrated a wide frequency range operation of an EPR spectrometer using two loop antennas, one for a microwave transmission and the other for signal detection [1]. In contrast to Ref. [1], the utilization of a microstrip antenna as a transmitter enhanced a capability of wide-band operation. The replacement of conventional capacitors with varactor diodes makes resonance condition easily reproducible without any mechanical action during tuning and matching procedure since the capacitance of the diodes is controlled electronically. The operation of the new EPR spectrometer was tested by measuring a signal of 1,1-diphenil-2-picrylhydrazyl (DPPH) sample in the frequency range of 0.8-2.5 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.2
• /
• pp.146-154
• /
• 1989

A new design method for matching GaAs FET amplifiers using DC block consisting of non-symmetrical two-microstrip line is presented. The non-symmetrical DC block has not only the function of DC block, but the function of impedance matching. Because of the above merits the non-symmetrical DC block can be used for MIC anc MMIC. The measured frequency responses exhibit a symmetrical characteristics at the center frequency, 4(GHz).

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.998-1007
• /
• 2018

The advent of Wireless Sensor Networks (WSN) has led to their use in numerous applications. Sensors are autonomous in nature and are constrained by limited resources. Designing an autonomous topology with criteria for economic and energy conservation is considered a major goal in WSN. The proposed honey-hive clustering consumes minimum energy and resources with minimal transmission delay compared to the existing approaches. The honey-hive approach consists of two phases. The first phase is an Intra-Cluster Min-Max Discrepancy (ICMMD) analysis, which is based on the local honey-hive data gathering technique and the second phase is Inter-Cluster Frequency Matching (ICFM), which is based on the global optimal data aggregation. The proposed data aggregation mechanism increases the optimal connectivity range of the sensor node to a considerable degree for inter-cluster and intra-cluster coverage with an improved optimal energy conservation.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.177-184
• /
• 2008

A low loss frequency doubler operated on low power for the RFID harmonic tags is presented. Using the excellent nonlinear characteristics of the Schottky barrier diode and proper matching networks between the diode and ports, the low conversion loss of the harmonic tag is accomplished. This doubler could be used to increase the detectable distance of the conventional RFID system adopted harmonic tags.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.129-132
• /
• 2008

The generally six-port phase correlator is comprised of a wilkinson power divider and three $90^{\circ}$ hybrid coupler, got bandwidth performance of less than 10%. in this paper, the six-port phase correlator using two section power divider has 33% bandwidth and external matching hybrid coupler has 15% bandwidth was designed with the center frequency of 2.5GHz. Analysis of the simulation result indicates that RF port and LO port got frequency bandwidth of 13%. Insert loss performance of fabricated six-port phase correlator is incremented, but bandwidth resembles simulation result. And phase tolerance within bandwidth is less than $90^{\circ}$.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.643-651
• /
• 2017

Steganography is one of information hiding technologies and discriminated from cryptography in that it focuses on avoiding the existence the hidden information from being detected by third parties, rather than protecting it from being decoded. In this paper, as an image steganography method which uses images as media, we propose a new block matching method that embeds information into the discrete wavelet transform (DWT) domain. The proposed method, based on a statistical analysis, reduces loss of embedding capacity due to inequable use of candidate blocks. It works in such a way that computes the variance of each candidate block, preserves candidate blocks with high frequency components while reducing candidate blocks with low frequency components by compressing them exploiting the k-means clustering algorithm. Compared with the previous block matching method, the proposed method can reconstruct secret images with similar PSNRs while embedding higher-capacity information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.602-607
• /
• 2006

In this paper, the distributed network synthesis, which is useful to the design of wireless power amplifiers, is proposed, and a RF power amplifier is designed using the technique. The transfer function of distributed matching circuits is derived by Chebyshev approximation, and network element values for a specified topology are given as a function of minimum insertion losses and ripples. As an example, after a power transistor is modeled by load-pull data, the synthesis for distributed matching networks is applied to a power amplifier design, which has the electrical performance of 17dB gain and less IM3 than -43dBc at the 20W output power between 800 to 900MHz frequency range. Experimental results from a fabricated amplifier are shown to approach the design performance in the operating frequency range. The design of impedance matching networks by the transfer function synthesis is a useful method for the design of RF power amplifiers.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.166-173
• /
• 2005

In this paper, we propose a mobile channel estimation algorithm using matching pursuit algorithm for orthogonal frequency division multiplexing (OFDM) systems. Least square (LS) algorithm, which is used as a conventional channel estimation algorithm for OFDM systems, has error probability of channel estimation affected by effects of noise. By estimating the channel of sparse type, the proposed algorithm reduces effects of noise during time intervals that multi-path signal doesn't exist. The proposed algorithm estimates a mobile receivingchannel using pilot information transmitted consequently. We compare performance of the proposed algorithm with the LS algorithm by measuring symbol error rate with 64QAM under a mobile multi-path fading channel model.