• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.147-151
• /
• 2005

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.

• 재활복지공학회논문지
• /
• 제7권2호
• /
• pp.35-40
• /
• 2013

WBAN 환경에서 Master와 Node들의 에너지 효율을 관리하는 것은 매우 중요하다. 동시에 Master는 Node로부터 데이터를 수집하고 제어하는 중요한 역할을 함으로써 효과적인 에너지 소비를 유지하여 어떠한 상황에서도 대처할 수 있어야한다. 따라서 Master와 Node 사이의 적절한 저전력 MAC 프로토콜이 필요하다. 우리는 간단히 WBAN 슈퍼프레임 구조를 변경해줌으로써 더 향상된 MAC 프로토콜을 제안한다. 시뮬레이션 결과는 제안된 구조가 IEEE 802.15.6과 기존 연구와 비교해서 Master와 각 노드들의 에너지의 효율이득을 나타낸다.

• 정보통신설비학회논문지
• /
• 제8권1호
• /
• pp.40-46
• /
• 2009

This paper presents a self-sustaining system, and an effective method in enhancing overall energy efficiency. The proposed system consists of the two major nodes: a slave node, which contains the environment information (e.g., temperature, humidity, etc.); and a master node, which communicates with the slave nodes, and transmit the slave node's information to users. All slave nodes are under control of the master node. Each slave node uses two power sources: the piezoelectric power generator (PPG); and the continuous wave from the master node. The paper highlights the basic operational principle, each node's specifications, and experimental data for performance verification. The two nodes successfully communicate each other in a range of 3.3m (maximal range), where the user's computer is wired the master node.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.65-70
• /
• 2017

This paper presents the implementation for the master changing algorithm between nodes in a general electric vehicle. The packet processing method based on the unique network method of an electric vehicle is that the method of processing a communication packet has the priority from the node of a vehicle installed at both ends. An important factor in deciding master or slave in a train is that the request data, the status data, and transmits or control codes of sub-devices are controlled from the node which master becomes. If the request data or the status data is transmitted from the non- master side, it is very important that only one of the devices of both stages be master since the data of the request data may collide with each other. This paper proposes an algorithm to select master or slave depending on which vehicle is started first, which node is master or slave, and whether the vehicle key is operation. Finally experimental results show the stable performance and effectiveness of the proposed algorithm.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.88-95
• /
• 2007

TCN(Train Communication Network) adopts the master/slave protocol to implement real-time communication. In this network, a fault on the master node, cased by either hardware or software failure, makes the entire communication impossible over TCN. To reduce fault detection and recovery time, this paper propose the contention based mastership transfer algorithm. Slave nodes detect the fault of master node and search next master node using the proposed algorithm. This paper also shows the implementation results of a SoC-based Fault-Tolerant MVB Controller(FT-MVBC) which includes the fault-detect-logic as well as the MVB network logic to verify this algorithm.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1574-1579
• /
• 2016

본 논문은 무인항공기 비행시간 향상을 위해 RF 무선 전력 획득 기술을 이용한 self-powered 센서 노드 회로에 관해 설계 연구하였다. 제안하는 센서 노드는 두 가지 경우가 만족하였을 때 동작한다. 마스터 노드의 입력 RF ID와 센서 노드의 ID가 같을 경우와 RF 무선 전력 획득 시스템이 히스테리시스 스위치에 의해 동작될 때다. 마스터 노드의 출력은 263 MHz에서 26 dBm을 사용하였다. RF 전력을 DC 전력으로 변환하는 최대 효율은 마스터 노드에서 2미터 떨어진 지점(4-6 dBm)에서 55 %이다. 최대 RF 무선 전력 획득 범위는 마스터 노드와 센서 노드의 거리가 약 13 m 이다. 센서 노드의 MCU 및 수신기와 온도 센서와 같은 부하의 소비 전력은 10 msec 동안 5.0 V에서 평균 15 mA이다.

• 한국통신학회논문지
• /
• 제34권12B호
• /
• pp.1435-1443
• /
• 2009

본 논문에서는 에너지 수확 센서 네트워크 시스템을 DEVS 형식론을 이용해서 시뮬레이션하고 모델링한다. 이 시스템은 주전원이나 배터리를 사용하는 싱크(마스터(master)) 노드와 에너지 수확 소자로부터 전원을 공급 받는 센서(slave) 노드로 구성 된다. 시뮬레이션을 위해 (i) 슬레이브 노드에서 에너지 수확하고 저장하는 회로의 동작을 연속적인 구간들로 분할한 후에 각 구간을 이산적인 상태로 표현하고, (ii) 마스터 노드와 슬레이브 노드의 컴포넌트들의 동작의 관계를 면밀하게 분석하여, (iii) 분석된 결과를 DEVS 형식론을 이용하여 모델링하고 시뮬레이션 한다.

• 디지털산업정보학회논문지
• /
• 제9권3호
• /
• pp.91-98
• /
• 2013

Node which plays the role of cache server does not exist in the wireless ad-hoc network consisting of only mobile nodes. Even if it exists, it is difficult to provide cache services due to the movement of nodes. Therefore, the cooperative cache technique is necessary in order to improve the efficiency of information access by reducing data access time and use of bandwidth in the wireless ad-hoc network. In this paper, the whole network is divided into zones which don't overlap and master node of each zone is elected. General node of each zone has ZICT and manages cache data to cooperative cache and gateway node use NZCT to manage cache information of neighbor zone. We proposed security structure which can accomplish send and receive in the only node issued id key in the elected master node in order to prepare for cache consistent attack which is vulnerability of distributed caching techniques. The performance of the proposed method in this paper could confirm the excellent performance through comparative experiments of GCC and GC techniques.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.95-101
• /
• 2013

MANET has an advantage that can build a network quickly and easily in difficult environment to build network. In particular, routing protocol that uses in existing mobile environment cannot be applied literally because it consists of only mobile node. Thus, routing protocol considering this characteristic is necessary. Malicious nodes do extensive damage to the whole network because each mobile node has to act as a router. In this paper, we propose technique that can detect accurately the suspected node which causes severely damage to the performance of the network. The proposed technique divides the whole network to zone of constant size and is performed simultaneously detection technique based zone and detection technique by collaboration between nodes. Detection based zone translates the information when member node finishes packet reception or transmission to master node managing zone and detects using this. The collaborative detection technique uses the information of zone table managing in master node which manages each zone. The proposed technique can reduce errors by performing detection which is a reflection of whole traffic of network.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
• /
• pp.117-119
• /
• 1999

Disk mirroring 시스템은 안정성과 고 가용성(High Availability)을 제공하기 때문에 고성능 시스템에서 많이 사용되고 있다. 본 논문에서는 Windows NT 커널에 remote node에 대한 disk mirroring 기능을 추가하여 시스템 자체에서 이러한 기능을 제공할 수 있는 모델을 설계하고자 한다. 설계 시스템은 Windows NT TDI 계층을 사용하여 network 으로 연결된 두 대의 시스템이 master node와 slave node의 pair로 구성되며,slave node가 master node의 디스크를 mirror하게 된다. 또한 fault tolerance 기능을 제공하여 node의 장애 발생시 log를 생성하고, 이 정보를 바탕으로 장애가 발생한 node에 대하여 데이터 복구 기능을 제공하도록 한다.