• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.147-151
• /
• 2005

CAN(Controller Area Network) is a simple and efficient network system for real time control and measurement. As it is not only good at error detection but also strong in electromagnetic interference, CAN has been widely used all over the industries. Basically, CAN needs a master node in charge of sensor data collection, node scheduling for data transmission to a monitoring system and error detection. According to the number of mater nodes, the CAN system is classified into two type of master system. One is a single master system that has only one master node and the other is a multi-master system where any sensor node can become a master node depending on the system's conditions. While it has the advantage of its fault tolerance, the multi-master system will suffer form the overall performance degradation when a defect is found in the master node. It is because all sensor nodes pertaining to a defective master node lose their position. Moreover, it is difficult and expensive to implement. For a single master system, the whole system will be broken down when a problem happens to a single master. In this paper, a dynamic master system is presented that there are several sub-master nodes of which basic functions are those of other sensor nodes at ordinary times but dynamically changed to replace the failing master node. An effective scheduling algorithm is also proposed to choose an appropriate node among sub-master nodes, where each sub-master node has its precedence value. The performance of the dynamic master system is experimented and analyzed.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.35-40
• /
• 2013

In WBAN environment, it is very important to achieve energy efficiency of master and nodes, At the same time, a master also plays an important role in collecting data from nodes and controlling the nodes. By maintaining a master properly, any kinds of situation can be handled. Therefore, low power MAC protocol between a master and a node is highly required appropriately. We propose an improved MAC protocol by simply changing the frame structure of WBAN system. The simulation results show that the proposed scheme attains a lot of saving of energy consumption of master and each node compared with IEEE 802.15.6 and conventional schemes.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.40-46
• /
• 2009

This paper presents a self-sustaining system, and an effective method in enhancing overall energy efficiency. The proposed system consists of the two major nodes: a slave node, which contains the environment information (e.g., temperature, humidity, etc.); and a master node, which communicates with the slave nodes, and transmit the slave node's information to users. All slave nodes are under control of the master node. Each slave node uses two power sources: the piezoelectric power generator (PPG); and the continuous wave from the master node. The paper highlights the basic operational principle, each node's specifications, and experimental data for performance verification. The two nodes successfully communicate each other in a range of 3.3m (maximal range), where the user's computer is wired the master node.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.65-70
• /
• 2017

This paper presents the implementation for the master changing algorithm between nodes in a general electric vehicle. The packet processing method based on the unique network method of an electric vehicle is that the method of processing a communication packet has the priority from the node of a vehicle installed at both ends. An important factor in deciding master or slave in a train is that the request data, the status data, and transmits or control codes of sub-devices are controlled from the node which master becomes. If the request data or the status data is transmitted from the non- master side, it is very important that only one of the devices of both stages be master since the data of the request data may collide with each other. This paper proposes an algorithm to select master or slave depending on which vehicle is started first, which node is master or slave, and whether the vehicle key is operation. Finally experimental results show the stable performance and effectiveness of the proposed algorithm.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.88-95
• /
• 2007

TCN(Train Communication Network) adopts the master/slave protocol to implement real-time communication. In this network, a fault on the master node, cased by either hardware or software failure, makes the entire communication impossible over TCN. To reduce fault detection and recovery time, this paper propose the contention based mastership transfer algorithm. Slave nodes detect the fault of master node and search next master node using the proposed algorithm. This paper also shows the implementation results of a SoC-based Fault-Tolerant MVB Controller(FT-MVBC) which includes the fault-detect-logic as well as the MVB network logic to verify this algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1574-1579
• /
• 2016

This paper presents a self-powered sensor-node scheme using a RF wireless power harvesting techniques for improve drone time of flight. Sensor-node that is proposed is turned when two conditions satisfy: The one is input RF ID data from master-node should be same with sensor-node's ID, and the other one is RF wireless power harvesting system is turned on by hysteresis switch. In this paper, master-node's output is 26 dBm at 263 MHz. Maximum RF to DC power conversion efficiency is about 55% at 4-6 dBm input power condition (2 meter from master-node). The maximum RF wireless power harvesting range is about 13 meter form master-node. And power consumption of the sensor-node's load elements such as transmitter, MCU and temperature sensors is approximately average 15 mA at 5.0 V for 10 msec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1435-1443
• /
• 2009

In this paper, an energy harvesting sensor network system is modeled and simulated by using the DEVS (Discrete Event System Specification) formalism. The system is composed of a sink (master) node, which is battery or mains powered, and a set of sensor (slave) nodes, each of which harvests ambient energy and converts it into electrical energy. For simulation, (i) the behavior of energy harvesting and storing circuits of the slave node is partitioned into a set of piecewise continuous segments and then each segment is represented as a discrete state; (ii) the interaction among the master node and components of the slave node is investigated preciously; and (iii) the investigated result is modeled and simulated by using the DEVS formalism.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.117-119
• /
• 1999

Disk mirroring 시스템은 안정성과 고 가용성(High Availability)을 제공하기 때문에 고성능 시스템에서 많이 사용되고 있다. 본 논문에서는 Windows NT 커널에 remote node에 대한 disk mirroring 기능을 추가하여 시스템 자체에서 이러한 기능을 제공할 수 있는 모델을 설계하고자 한다. 설계 시스템은 Windows NT TDI 계층을 사용하여 network 으로 연결된 두 대의 시스템이 master node와 slave node의 pair로 구성되며,slave node가 master node의 디스크를 mirror하게 된다. 또한 fault tolerance 기능을 제공하여 node의 장애 발생시 log를 생성하고, 이 정보를 바탕으로 장애가 발생한 node에 대하여 데이터 복구 기능을 제공하도록 한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.91-98
• /
• 2013

Node which plays the role of cache server does not exist in the wireless ad-hoc network consisting of only mobile nodes. Even if it exists, it is difficult to provide cache services due to the movement of nodes. Therefore, the cooperative cache technique is necessary in order to improve the efficiency of information access by reducing data access time and use of bandwidth in the wireless ad-hoc network. In this paper, the whole network is divided into zones which don't overlap and master node of each zone is elected. General node of each zone has ZICT and manages cache data to cooperative cache and gateway node use NZCT to manage cache information of neighbor zone. We proposed security structure which can accomplish send and receive in the only node issued id key in the elected master node in order to prepare for cache consistent attack which is vulnerability of distributed caching techniques. The performance of the proposed method in this paper could confirm the excellent performance through comparative experiments of GCC and GC techniques.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.95-101
• /
• 2013

MANET has an advantage that can build a network quickly and easily in difficult environment to build network. In particular, routing protocol that uses in existing mobile environment cannot be applied literally because it consists of only mobile node. Thus, routing protocol considering this characteristic is necessary. Malicious nodes do extensive damage to the whole network because each mobile node has to act as a router. In this paper, we propose technique that can detect accurately the suspected node which causes severely damage to the performance of the network. The proposed technique divides the whole network to zone of constant size and is performed simultaneously detection technique based zone and detection technique by collaboration between nodes. Detection based zone translates the information when member node finishes packet reception or transmission to master node managing zone and detects using this. The collaborative detection technique uses the information of zone table managing in master node which manages each zone. The proposed technique can reduce errors by performing detection which is a reflection of whole traffic of network.