• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.421-431
• /
• 2006

Statement of problem : Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression technique in internal connection implant system. Purpose: This study evaluated the accuracy of splinted fixture-level impression technique using clinical methods and the effect of internal hex on fit of superstructure in internal connection implant system (Astra Tech). Material and method : Two metal master frameworks made from two abutments (Cast-to Abutment ST) each for parallel and divergent conditions and a corresponding. passively fitting, dental stone master cast with four future replicas (Fixture Replica ST) were fabricated. Ten dental stone casts were made with vinyl polysiloxane impressions from the master cast by acrylic resin splinted fixture-level impression technique. To evaluate the accuracy of impression technique, the fit of master frameworks for test models was evaluated using screw resistance test (SRT) and one-screw test. The results of SRT were recorded as SRT values from grade 1 to grade 5 by 1/4 turn. And to evaluate the effect of hex on fit of superstructure, the same tests were performed after removing hexes of master frameworks. Results: 1. There was only one case (2.5%) showing SRT value of test model below ade 2 in total before and after removing hexes of master frameworks. And, by removing hexes. SRT values decreased in only one test model (5%) and did not change in 17 test models (85%). 2. SRT values of the 1$^{st}$ screws were grade 2 in 80% of cases before, and grade 1 in 80% of cases after removing hexes. And, by removing hexes, SRT values decreased in 72.5% of cases. 3. SRT values of the 2$^{nd}$ screws were grade 3 in 85% of cases before, and grade 3 in 95% of cases after removing hexes. And, by removing hexes, SRT values did not change in 85% of cases. 4. There were only 2 cases regarded as acceptable fit by one-screw test, and SRT values of 2$^{nd}$ screws of both cases were grade 2. Conclusion. Within the limitations of this study, future-level impression of internal connection implant system is considered to obtain inaccurate working cast, even using acrylic resin splinted impression technique. And, it is considered to be unable improve the fit to remove the hexes of implant restoration.

• 항공우주기술
• /
• 제4권1호
• /
• pp.203-210
• /
• 2005

KSLV-I에 탑재를 위한 주 데이터 장치(MDU)의 초기개발모델이 제작되었으며 인터페이스시험이 수행되었다. MDU의 엔지니어링 및 비행모델 제작을 수행하기 이전에 MDU 초기 모델에 대한 발사체 탑재 가용성을 확인하기 위하여 신뢰도 예측을 수행하였다. 본 논문은 전장품의 신뢰도 예측에 활용되는 MIL-HDBK-217F를 근간으로 MDU 개발 모델의 신뢰도 예측 방법에 대해 기술하였으며 신뢰도 예측결과를 기술하고 있다.

• 품질경영학회지
• /
• 제38권1호
• /
• pp.52-63
• /
• 2010

The purpose of this study is to investigate whether or not belt's jobs represent a source of job enrichment that translates into positive job characteristics and satisfaction. Hackman and Oldham's 5 job characteristics, 3 critical psychological states and MPS are utilized for analyzing results of the study. The results indicate that Black and Master Black Belt's jobs have positive effects on all five job characteristics, 3 psychological states, and MPS score. However, the findings indicate that Black and Master Black Belt's jobs are no direct effect on job satisfaction suggesting that growth need strength controls on job satisfaction. The result shows that there is a support for the prediction that growth needs strength controls the effect of belt's jobs on job satisfaction.

• 대한치과의사협회지
• /
• 제12권9호
• /
• pp.667-677
• /
• 1974

A testing machine was devised and constructed for the purpose of measuring the retentive forces of maxillary complete denture bases in subjects. Forth complete denture bases were made for ten subjects with three different denture base materials, following the usual denture construction technique. Retentive forces of the forty dentures were determined at seven locations. The tests on each base were repeated three times at intervals of 5 minutes. Differences in retention values were evaluated statistically. 1) Differences in retention values were found by the differences of the denture base materials, but acrylic resin was similar to chromium cobalt alloy. 2) The chromium cobalt alloy and acrylic resin bases from master models revealed the best retention values, the gold alloy base from master model was the poor second and the acrylic resin base from snap model was the third. 3) The retention values for hook-1 revealed higher than that for hook-2 and the retention values for hook-3 revealed the lowest value.

• 대한안전경영과학회지
• /
• 제11권4호
• /
• pp.221-228
• /
• 2009

Electronic Product Code Information Services(EPCIS) is an EPCglobal standard for sharing EPC related information between trading partners. EPCIS provides a new important capability to improve efficiency, security, and visibility in the global supply chain. EPCIS data are classified into two categories, master data (static data) and event data (dynamic data). Master data are static and constant for objects, for example, the name and code of product and the manufacturer, etc. Event data refer to things that happen dynamically with the passing of time, for example, the date of manufacture, the period and the route of circulation, the date of storage in warehouse, etc. There are four kinds of event data which are Object Event data, Aggregation Event data, Quantity Event data, and Transaction Event data. This thesis we propose an event-based data model for EPC Information Service repository in RFID based integrated logistics center. This data model can reduce the data volume and handle well all kinds of entity relationships. From the point of aspect of data quantity, we propose a formula model that can explain how many EPCIS events data are created per one business activity. Using this formula model, we can estimate the size of EPCIS events data of RFID based integrated logistics center for a one day under the assumed scenario.

• 한국ITS학회 논문지
• /
• 제17권6호
• /
• pp.25-39
• /
• 2018

본 연구에서는 최근 활발하게 활용되고 있는 머신러닝 기법을 교통분야에 적용하여 효율적인 돌발상황 검지 알고리즘을 개발하는 것을 목적으로 하였다. 미시교통시뮬레이션 모형을 통하여 대상지의 네트워크를 구축하였고 돌발상황에 영향을 줄 것으로 예상되는 변수의 여러 조합을 통해 시나리오를 설정하여 가상의 돌발상황 데이터를 수집하였다. 다음으로 대표적인 돌발상황 검지 알고리즘인 McMaster 알고리즘과 본 연구에서 개발한 나이브 베이즈 분류기를 구현하여 비교 평가하였다. 비교 결과, 나이브 베이즈 분류기가 McMaster 알고리즘에 비해 돌발상황 검지 간격에 따른 부정적인 영향이 적었고 더 우수한 검지율을 보였다. 하지만 검지율이 증가하는 만큼 오검지율 또한 증가하는 것을 확인할 수 있었다. McMaster 알고리즘은 4주기를 통해 검지가 가능하지만 나이브 베이즈 분류기는 1주기(30초)만으로 돌발상황을 판단할 수 있다. 본 연구를 통해 개발한 나이브 베이즈 분류기가 효율적으로 돌발을 파악할 수 있다는 것을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1540-1553
• /
• 2019

A nuclear power plant (NPP) is a highly complex system-of-systems as manifested through its internal systems interdependence. The negative impact of such interdependence was demonstrated through the 2011 Fukushima Daiichi nuclear disaster. As such, there is a critical need for new strategies to overcome the limitations of current risk assessment techniques (e.g. the use of static event and fault tree schemes), particularly through simulation of the nonlinear dynamic feedback mechanisms between the different NPP systems/components. As the first and key step towards developing an integrated NPP dynamic probabilistic risk assessment platform that can account for such feedback mechanisms, the current study adopts a system dynamics simulation approach to model the thermal dynamic processes in: the reactor core; the secondary coolant system; and the pressurized water reactor. The reactor core and secondary coolant system parameters used to develop system dynamics models are based on those of the Palo Verde Nuclear Generating Station. These three system dynamics models are subsequently validated, using results from published work, under different system perturbations including the change in reactivity, the steam valve coefficient, the primary coolant flow, and others. Moving forward, the developed system dynamics models can be integrated with other interacting processes within a NPP to form the basis of a dynamic system-level (systemic) risk assessment tool.

• 대한치과보철학회지
• /
• 제36권3호
• /
• pp.496-505
• /
• 1998

The purpose of this study was to evalute the effect of immersion disinfection on the dimensional stability of rubber impression materials. The metallic master model was made in order to simulate the intraoral arch form. Impressions were made from four impression materials (Exaflex, Extrude, Reprosil, Impregum-F) and immersed in three disinfectant solutions (Wydex, Vi-Pon, Potadine). Casts from the impressions were measured according to the interpreparation distance. The A-B and The B-D abutment distance were compared with the control group and disinfected groups. The results were as follows; 1. The measurements of the stone cast increased relative to the master model and there was a significant difference (P<0.05). 2. The relative dimensional change of the stone cast as compared with master model ranged from 0.10% to 0.56% in the A-B distance and ranged from 0.04% to 0.27% in the B-D distance. 3. The dimensional change of the disinfected groups as compared with the control group was significantly different in the three impression materials except for Impregum-F (P<0.05). 4. The relative dimensional change of the disinfected groups compared with the control group ranged from 0% to 0.20% in the A-B distance and ranged from -0.09% to 0.11% in the B-D distance. These results suggest that immersion disinfection of rubber impression materials by chemical disinfectants causes very small dimensional change and the change is clinically acceptable for prothesis fabrication

• 환경영향평가
• /
• 제19권4호
• /
• pp.381-396
• /
• 2010

It is essential to consider strategies, spatial planning, and reflection of sustainability for the creation of sound urban spaces. To this end, there is a need for plans that can secure better sustainability through strategic environmental assessment (SEA) of plans. This study examined the literature and available precedent to develop a SEA model for administrative plans for urban development including metropolitan plans, urban master plans and urban management plans. In the course of development of the model, environmental issues associated with the urban plans were analyzed by classifying them into ten categories, including "spatial planning," "conservation planning," "greenbelt systems," "habitats." and etc. according to their rank. Furthermore, those issues were reflected on the development of environmental evaluation indices for the plans. Overall and detailed environmental indices that can be applied to the administrative plans for urban development including metropolitan plans, urban master plans and urban management plans were devised for five stages: (1) Establishment of development goals and strategy, (2) Analysis of current status and characteristics, (3) Conceptualization of spatial structure, (4) Planning for each department, and (5) Execution and management. Sub plans are more detailed and concrete. Criteria based on the evaluation indices, when performing evaluations on plans based on each environmental assessment index in reference to experts and the literature, were used to forecast their effects, i.e. whether they had a positive, negative, or no effect or relationship, or whether their effects was uncertain. Based on the forecasts, this study then presents means to establish more improvable plans. Furthermore, by synthesis of the effects according to each index and integration of the process, plans were analyzed overall. This study reflects the characteristics of the present time period based on issues in the SEA process and techniques in upper level administrative plans being newly established, and presents them according to the stage of each plan. Furthermore, by forecasting the effect of plans by stage, this study presents proposals for improvement, and in this aspect, can be meaningful in promoting plan improvements through SEA.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.175-182
• /
• 2011

본 논문은 비디오 처리를 위한 SoC 내에서 다수 개의 프로세싱 블록(마스터)들을 처리할 수 있는 고성능의 메모리 제어기를 설계하였다. 메모리 제어기는 마스터 중재기에 의해 중재되며 이것은 메모리 접근을 요구하는 마스터들의 요구 신호를 받아 데이터를 전송하는 역할을 해주게 된다. 구현된 메모리 제어기는 마스터 선택기, 마스터 중 재기, 메모리 신호 생성기, 명령어 디코더, 데이터 버스, 그리고 메모리 신호 생성기로 구성된다. 제안한 메모리 제어기는 VHDL을 이용하여 설계하였고, 삼성의 메모리 모델을 이용하여 동작을 검증하였다. FPGA 합성 및 검증을 위해서는 ATERA사의 Quartus II를 이용하였고, 구현된 하드웨어는 Cyclone II 칩을 사용하였다. 시뮬레이션을 위해서는 Cadence사의 ModelSim을 이용하였고, FPGA 환경에서 174.28MHz의 주파수로 동작하여, SDRAM의 규격을 모두 만족할 수 있었다.