• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.164-168
• /
• 2007

Deformation of a shadow mask is one of the problems encountered during the deposition of organic materials for manufacturing large size OLED. The larger the glass substrate, the larger the shadow mask becomes. But as the size of the shadow mask increases, its deformation becomes more severe, thereby making it difficult to deposit organic materials in a precise pattern on a substrate. In this paper, a new type mask-frame structure is proposed. The proposed mask-frame structure making a curved mask has the ability of reducing drooping of mask. The test frame is fabricated and evaluation experiments are performed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.348-352
• /
• 2008

Deformation of the shadow mask is one of the problems encountered during the deposition of organic materials for manufacturing large size organic light emitting diode (OLED). The larger the glass substrate, the larger the shadow mask becomes. As the size of the shadow mask increases, its deformation becomes more severe, thereby making it difficult to deposit organic materials in a precise pattern on a substrate. In this paper, a new method for reducing drooping of the shadow mask for large size OLED vapor depositions is proposed. The proposed shadow mask with cross stripe wires has higher stiffness than the pure shadow mask, which results in reducing drooping of the shadow mask. A commercial FEM program, ANSYS, is used for the evaluation of the proposed shadow mask. The analysis showed that the shadow mask with cross stripe wires have an effect on reducing drooping about 18.6% or more.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.901-907
• /
• 2000

As the minimum feature size for making ULSI approaches the wavelength of light source in optical lithography, the aerial image is so hardly distorted because of the optical proximity effect that the accurate mask image reconstruction on wafer surface is almost impossible. We applied the Optical Proximity Correction(OPC) on isolated patterns assuming Attenuated Phase Shift Mask(APSM) as well as binary mask, to correct the widening of isolated patterns. In this study, we found that applying OPC to APSM shows much better improvement not only in enhancing the resolution and fidelity of t도 images but also in enhancing the process margin than applying OPC to the binary mask. Also, we propose the OPC method of APSM for isolated patterns, the size of which is less than the wavelength of the ArF excimer laser. Finally, we predicted the resolution limit of optical lithography through the aerial image simulation.

• Journal of the Korean Society of Costume
• /
• v.64 no.8
• /
• pp.124-137
• /
• 2014

The purpose of this study is to produce an essential guideline for making costumes for traditional Korean mask plays by doing a comparative analysis between traditional Korean mask plays and Italian 'Commedia dell'arte'. The results of this study are as follow. The costumes of Korea's mask plays were mainly used to show difference in social status. Analysis showed that costume features, such as color, fabric, and silhouette, were not important to the traits of the character. On the other hand, the costumes in the Italian 'Commedia dell'arte' were used to express the characters' traits. The colors, fabric and silhouettes were exaggerated compared to everyday wear. This enhanced the looks of the character, and it kept on developing with the demands of the culture consumer. This study was performed to support further development and success of traditional Korean mask plays.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.85-94
• /
• 2019

Purpose: The purpose of this study was to observe the degree of mask contamination in dental hygienist for general and oral bacteria and to identify areas of mask contamination after treatment. Methods: Masks were collected with every fifty dental hygienists who currently working in the department of preventive dentistry, prosthodontics, and orthodontics in Busan. The mask bacteria were collected in specific upper and side parts of the mask. Hand germs were collected using sterile cotton swabs, and then placed in a sterile conical tube. These were transferred to the laboratory. Hand germs and mask bacteria were incubated with nutrient broth (NB) and brain heart infusion broth (BHI) for 24 hrs and each cultured with NB and BHI plate at $37^{\circ}C$ for 48 hrs. Collected data were analyzed using the SPSS Window 20. Results: The number of bacteria was observed in the order of the department of preventive dentistry ($10.1{\times}10^5CFU/ml$), prosthodontics ($14.7{\times}10^5CFU/ml$), and orthodontics ($23.3{\times}10^5CFU/ml$) in the hand. In general bacteria, the difference of contamination was seen by the parts of the mask, but there was no significant difference. However, the oral bacteria were observed highly contaminated upper part of the mask in preventive dentistry. The mask contamination according to the medical departments was observed. Especially, the contamination of mask in preventive dentistry was significantly higher than other departments in oral bacteria. Conclusion: This study suggested that correct mask replacement and recognition of contamination areas can contribute to the prevention of infectious disease. and it would be necessary to increase hand hygiene performance to prevent cross-infection with masks. Also, this study may give an idea for making guidelines for mask management and supporting to establish clear criteria for the education program of personal protective equipment.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.73-83
• /
• 2024

In this study, environmental evaluation of high barrier coated paper (coating layer/paper) packaging is conducted in comparison with conventional aluminum laminated (PET/VMPET/LLDPE) plastic packaging. The target product for this packaging is a KF94 mask, which requires a high barrier of water and oxygen to maintain the filtration ability of the mask filter. The functional unit of this study is 10,000 mask packaging materials based on a material capable of blocking oxygen (<1 g/m²day) and moisture (<3 g/m²day) for the preservation of KF94 masks. In order to understand the results easily, paper-based mask packaging system divided into 6 stages (pulp, pulping & paper making, calendaring & coating, printing, packing and waste management), while plastic-based mask packaging consists of 5 stages (material production, processing, printing, packing, waste management) In case of paper-based mask packaging, most contributing stage is calendaring & coating, resulting from heat and electricity production. On the other hand, plastic-based mask packaging is contributed more than 30% by material production, specifically due to linear low density polyethylene and purified terephthalic acid production. The comparison results show that global warming potential of paper-based mask packaging has 32% lower than that of plastic-based mask packaging. Most of other impact indicators revealed in similar trend.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.191-194
• /
• 2003

Low energy EPL용 마스크 구현을 위한 특성을 연구하였다. Monte Carlo 법을 이용하여 시뮬레이터를 제작하였고, pattern side wall의 slope와 membrane의 Thickness, 전자빔의 가속전압에 따른 전자빔의 거동을 확인함을 통하여 Low energy EPL용 마스크 제작을 위한 spec.을 도출하였다. 또한 실제 제작을 위한 기초단계로 Si etching을 수행하였으며, mask 제작법에 대한 가능성을 확인할 수 있었다.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.4 s.17
• /
• pp.11-15
• /
• 2006

Expose equipment system that is used for manufacturing process of Flat Panel Display, is most important equipment in whole process. Expose equipment that is for making pattern of mask on substrate, consists of optical part, stage part and transport part. The stage is an important part that aligns mask and substrate for delivering pattern of mask to substrate exactly. In this paper, control system of expose stage that is able to use mask and substrate of diverse size, with PC controller using GUI interface instead of PLC control system. The existing PLC control system does not have the suitable structure for using mask of diverse size. GUI interface integration control system is based on PC. So it has the advantage of convenient use and active operation. We embodied PLC control system in integration control system based on PC, and verified utility possibility through the standard test course.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.6
• /
• pp.15-22
• /
• 2021

This study is aimed at suggesting a direction for the development of sensuous and creative art mask design by making art masks rooted in the aesthetic characteristics of psychedelia. The conceptual definition and characteristics of psychedelia were identified on previous studies, specialized books and works of art. The characteristics of psychedelia based on theoretical research were limited to illusionism, abstraction, play, and dynamism, which are often used in researcher's work, and four research works were produced by combining them with art mask design. By trying to diversify works regardless of form or tradition, this study could make the infinite creation of art mask possible and transform that into a new modern beauty. In addition, by expressing internal meaning along with external characteristics in the design of works, it could bring the establishment of a new perception and value of art mask. In the future, it is hoped that this study will be used as basic data for follow-up research related to art mask design and be helpful in the development of art mask design.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.71-78
• /
• 2007

Abrasive jet machining (AJM) has been traditionally used for removing rusts or paints. Nowadays, this is promising technology for micro bulk machining where brittle substrate materials are used. In order to get accurate details, masks such as metal, polymer or elastomer is inevitable. Among them, photo polymer which is sensitive to the light has been attractive for it's high accuracy using photolithography. In this research, SU-8 as a photo polymer is used since it is adequate for making thick mask. So, this paper describes how to make AJM masks using SU-8 with a photolithography process, and investigates the characteristics of SU-8 masks during AJM process. Also, an example of fabrication using AJM was shown.